CoroMill Plura HD, Carbide Solid Radius End Mill (with Square Center-Cut Oil Hole) (Part Numbers)
- Volume Discount
· Internal lubrication gives good chip discharge properties.
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
2S342-1200-050CMA-1740
Part Number
|
|---|
| 2S342-1200-050CMA-1740 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | R Size (mm) | Overall Length (L) (mm) | Shank diameter (d) (mm) | Usable length (mm) | Maximum Cutting Amount (mm) | |
|---|---|---|---|---|---|---|---|---|---|
278.95 € | 1 | 6 Days | 2 | 72 | 12 | 22.00 | 22.00 |
Loading...
Basic information
| work material | Quenched and tempered steel / Stainless Steel | Number of flutes(sheet) | 4 | Type | Radius |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Shank diameter tolerance | h6 | Maximum Ramping Angle(°) | 5 |
This page is CoroMill Plura HD, Carbide Solid Radius End Mill (with Square Center-Cut Oil Hole), part number 2S342-1200-050CMA-1740.
You can find the detail information about specifications and dimensions on part number 2S342-1200-050CMA-1740.
Configure
Basic Attributes
-
Type
- 2S342-□-□CMA-1740
-
R Size(mm)
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Usable length(mm)
-
Maximum Cutting Amount(mm)
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 2S342-0800-100CMA-1740 |
| 2S342-0800-150CMA-1740 |
| 2S342-0800-200CMA-1740 |
| 2S342-1200-100CMA-1740 |
| 2S342-1200-150CMA-1740 |
| 2S342-1200-200CMA-1740 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | R Size (mm) | Overall Length (L) (mm) | Shank diameter (d) (mm) | Usable length (mm) | Maximum Cutting Amount (mm) |
|---|---|---|---|---|---|---|---|---|---|
145.07 € | 1 | 6 Days | 1 | 63 | 8 | 18.00 | 18.00 | ||
145.07 € | 1 | 6 Days | 1.5 | 63 | 8 | 18.00 | 18.00 | ||
145.07 € | 1 | 6 Days | 2 | 63 | 8 | 18.00 | 18.00 | ||
350.61 € | 1 | Available | 6 Days | 1 | 83 | 12 | 26.00 | 26.00 | |
246.75 € | 1 | 6 Days | 1.5 | 83 | 12 | 26.00 | 26.00 | ||
246.75 € | 1 | 6 Days | 2 | 83 | 12 | 26.00 | 26.00 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.