CoroMill Plura HD, End Mill, Roughing and Finish Milling, Without Center Cut, 2F342-PC-1730 (Part Numbers)
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
2F342-1000-050-PC-1730
Part Number
|
|---|
| 2F342-1000-050-PC-1730 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | R Size (mm) | Overall Length (L) (mm) | Shank diameter (d) (mm) | Usable length (mm) | Maximum Cutting Amount (mm) | Neck diameter (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
188.70 € | 1 | 6 Days | 0.5 | 72 | 10 | 30.00 | 22.00 | 9.50 |
Loading...
Basic information
| work material | General Steel / Cast Iron | Number of flutes(sheet) | 5 | Type | Radius |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Shank diameter tolerance | h6 | Maximum Ramping Angle(°) | 7 |
This page is CoroMill Plura HD, End Mill, Roughing and Finish Milling, Without Center Cut, 2F342-PC-1730, part number 2F342-1000-050-PC-1730.
You can find the detail information about specifications and dimensions on part number 2F342-1000-050-PC-1730.
Configure
Basic Attributes
-
Type
- 2F342-□-□-PC-1730
-
R Size(mm)
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Usable length(mm)
-
Maximum Cutting Amount(mm)
-
Neck diameter(mm)
- 5.70
- 7.60
- 9.50
- 11.40
- 15.20
- 19.00
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 2F342-0800-050-PC-1730 |
| 2F342-0800-100-PC-1730 |
| 2F342-0800-200-PC-1730 |
| 2F342-1000-100-PC-1730 |
| 2F342-1000-200-PC-1730 |
| 2F342-1200-050-PC-1730 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | R Size (mm) | Overall Length (L) (mm) | Shank diameter (d) (mm) | Usable length (mm) | Maximum Cutting Amount (mm) | Neck diameter (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
132.95 € | 1 | 6 Days | 0.5 | 63 | 8 | 25.00 | 18.00 | 7.60 | ||
132.95 € | 1 | 6 Days | 1 | 63 | 8 | 25.00 | 18.00 | 7.60 | ||
132.95 € | 1 | 6 Days | 2 | 63 | 8 | 25.00 | 18.00 | 7.60 | ||
166.53 € | 1 | 6 Days | 1 | 72 | 10 | 30.00 | 22.00 | 9.50 | ||
188.70 € | 1 | 6 Days | 2 | 72 | 10 | 30.00 | 22.00 | 9.50 | ||
225.29 € | 1 | 6 Days | 0.5 | 83 | 12 | 36.00 | 26.00 | 11.40 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.