Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT
· Carbide drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Hole diameter (drill diameter) Dc (mm) | Groove Length L (mm) | Overall Length L (mm) | Shank diameter (mm) | Tool No. | Thinning | |
|---|---|---|---|---|---|---|---|---|---|---|
98.10 € | 1 | 6 Days | 3.03 | 15 | 65 | 3 | 8688903 | R type / X type | ||
103.60 € | 1 | 6 Days | 3.53 | 18 | 70 | 4 | 8688923 | R type / X type | ||
110.80 € | 1 | 6 Days | 4.03 | 20 | 70 | 4 | 8688904 | R type | ||
118.10 € | 1 | 6 Days | 4.53 | 23 | 75 | 5 | 8688924 | R type | ||
125.30 € | 1 | 6 Days | 5.03 | 25 | 75 | 5 | 8688905 | R type | ||
132.10 € | 1 | 6 Days | 5.53 | 28 | 80 | 6 | 8688925 | R type | ||
132.10 € | 1 | 6 Days | 6.03 | 30 | 80 | 6 | 8688906 | R type | ||
140.00 € | 1 | 6 Days | 6.53 | 33 | 85 | 7 | 8688926 | R type | ||
148.10 € | 1 | 6 Days | 7.03 | 35 | 85 | 7 | 8688907 | R type | ||
165.00 € | 1 | 6 Days | 8.03 | 40 | 90 | 8 | 8688908 | R type | ||
171.80 € | 1 | 6 Days | 8.53 | 43 | 95 | 9 | 8688928 | R type | ||
180.40 € | 1 | 6 Days | 9.03 | 45 | 95 | 9 | 8688909 | R type | ||
194.70 € | 1 | 6 Days | 10.03 | 50 | 100 | 10 | 8688910 | R type | ||
208.70 € | 1 | 6 Days | 11.03 | 55 | 115 | 11 | 8688911 | R type | ||
227.40 € | 1 | 6 Days | 12.03 | 60 | 120 | 12 | 8688912 | R type |
Loading...
Basic information
| Work material | General steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum | Tool Material Type | Carbide | Shank Type | End Mill Shank |
|---|---|---|---|---|---|
| Coating Y/N | Available | Coating Type | Other | With/without Oil Hole | Available |
| Permissible values of the outer diameter and the diameter | h8 | Torsional Angle(°) | 30 | Application | Recommended for shrink fitting systems. |
| Coating Details | EgiAs coating |
Configure
Basic Attributes
-
Hole diameter (drill diameter) Dc(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
Shank diameter(mm)
-
Tool No.
-
Type
- ADO-PLT
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.