SG Spiral Tap Long Shank SGSPL (SGSPL4M0.7RX100)
- Volume Discount
Product Details:
Manufacturer part number: SGSPL4M0.7RX100
Brand: NACHI(FUJIKOSHI)
Price: 40.20 €
Delivery time: 6 Days
Technical Data:
Nominal: M4
Pitch, Number of Threading: 0.7 mm
Overall Length (L): - mm
shank diameter Ds: 5 mm
Class TAP Limit: REG P3
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SGSPL4M0.7RX100
Part Number
|
|---|
| SGSPL4M0.7RX100 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Nominal | Pitch, Number of Threading (mm) | Overall Length (L) (mm) | shank diameter Ds (mm) | Class TAP Limit | Thread Length l (mm) | Number of Grooves Flutes | Under-head Length Ln (mm) | Shank square part K | Shank square part Lk | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
40.20 € | 1 | Available | 6 Days | M4 | 0.7 | - | 5 | REG P3 | 7.8 | 3 | 17.0 | 4 | 7 |
Loading...
Basic information
| Screw Types | Meter | Chamfer threads | 2.5 | Tool Material Type | Alloy HSS |
|---|---|---|---|---|---|
| work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless Steel (JIS-SUS) / Quenched and tempered steel (25 to 35 HRC) / Ductile Cast Iron (FCD) / Copper (Cu) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) | Tap Type | Spiral Tap | Hole type | For through hole / For blind hole |
| Coating Y/N | Available | Surface Treatment | SG (TiCN-based) Coat | Torsion Angle | 45° |
This page is SG Spiral Tap Long Shank SGSPL, part number SGSPL4M0.7RX100.
You can find the detail information about specifications and dimensions on part number SGSPL4M0.7RX100.
Configure
Basic Attributes
-
Overall Length (L)(mm)
-
Type
- SGSPL
-
Nominal
-
Pitch, Number of Threading(mm)
-
shank diameter Ds(mm)
-
Class TAP Limit
- REG P2
- REG P3
- REG P4
- REG P5
-
Thread Length l(mm)
-
Number of Grooves Flutes
- 3
- 4
-
Under-head Length Ln(mm)
-
Shank square part K
-
Shank square part Lk
Filter by standard shipping days
-
- All
- 6 Days or Less
- 9 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SGSPL10M1.25RX150 |
| SGSPL10M1.5RX100 |
| SGSPL10M1.5RX150 |
| SGSPL5.5M0.5RX100 |
| SGSPL5M0.5RX100 |
| SGSPL5M0.8RX100 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Nominal | Pitch, Number of Threading (mm) | Overall Length (L) (mm) | shank diameter Ds (mm) | Class TAP Limit | Thread Length l (mm) | Number of Grooves Flutes | Under-head Length Ln (mm) | Shank square part K | Shank square part Lk |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
69.83 € | 1 | Available | 6 Days | - | - | 150 | 7 | REG P3 | 15.1 | 3 | 31.9 | 5.5 | 8 | |
50.17 € | 1 | Available | 6 Days | - | - | - | 7 | REG P3 | 18.8 | 3 | 31.9 | 5.5 | 8 | |
69.83 € | 1 | Available | 6 Days | - | - | 150 | 7 | REG P3 | 18.8 | 3 | 31.9 | 5.5 | 8 | |
52.15 € | 1 | Available | 6 Days | 5.5M | 0.5 | - | 5.5 | REG P2 | 5.8 | 3 | 23 | 4.5 | 7 | |
46.08 € | 1 | Available | 6 Days | 5M | 0.5 | - | 5.5 | REG P2 | 5.8 | 3 | 21 | 4.5 | 7 | |
36.60 € | 1 | 10 Days | 5M | 0.8 | - | 5.5 | REG P3 | 9.5 | 3 | 21 | 4.5 | 7 |
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.