SG Spiral Tap Long Shank SGSPL (SGSPL7M1RX100)
Product Details:
Manufacturer part number: SGSPL7M1RX100
Brand: NACHI(FUJIKOSHI)
Price: 60.80 €
Delivery time: 6 Days
Technical Data:
Nominal: M7
Pitch, Number of Threading: 1 mm
Overall Length (L): - mm
shank diameter Ds: 6.2 mm
Class TAP Limit: REG P3
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SGSPL7M1RX100
Part Number
|
|---|
| SGSPL7M1RX100 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Nominal | Pitch, Number of Threading (mm) | Overall Length (L) (mm) | shank diameter Ds (mm) | Class TAP Limit | Thread Length l (mm) | Number of Grooves Flutes | Under-head Length Ln (mm) | Shank square part K | Shank square part Lk | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
60.80 € | 1 | 6 Days | M7 | 1 | - | 6.2 | REG P3 | 11.5 | 3 | 25.3 | 5 | 8 |
Loading...
Basic information
| Screw Types | Meter | Chamfer threads | 2.5 | Tool Material Type | Alloy HSS |
|---|---|---|---|---|---|
| work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Alloy Steel (SCM) / Stainless Steel (JIS-SUS) / Quenched and tempered steel (25 to 35 HRC) / Ductile Cast Iron (FCD) / Copper (Cu) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) | Tap Type | Spiral Tap | Hole type | For through hole / For blind hole |
| Coating Y/N | Available | Surface Treatment | SG (TiCN-based) Coat | Torsion Angle | 45° |
This page is SG Spiral Tap Long Shank SGSPL, part number SGSPL7M1RX100.
You can find the detail information about specifications and dimensions on part number SGSPL7M1RX100.
Configure
Basic Attributes
-
Overall Length (L)(mm)
-
Type
- SGSPL
-
Nominal
-
Pitch, Number of Threading(mm)
-
shank diameter Ds(mm)
-
Class TAP Limit
- REG P2
- REG P3
- REG P4
- REG P5
-
Thread Length l(mm)
-
Number of Grooves Flutes
- 3
- 4
-
Under-head Length Ln(mm)
-
Shank square part K
-
Shank square part Lk
Filter by standard shipping days
-
- All
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SGSPL10M1.25RX150 |
| SGSPL10M1.5RX100 |
| SGSPL10M1.5RX150 |
| SGSPL7M1RX150 |
| SGSPL8M0.75RX100 |
| SGSPL8M0.75RX150 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Nominal | Pitch, Number of Threading (mm) | Overall Length (L) (mm) | shank diameter Ds (mm) | Class TAP Limit | Thread Length l (mm) | Number of Grooves Flutes | Under-head Length Ln (mm) | Shank square part K | Shank square part Lk |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
92.70 € | 1 | 6 Days | - | - | 150 | 7 | REG P3 | 15.1 | 3 | 31.9 | 5.5 | 8 | ||
66.60 € | 1 | 6 Days | - | - | - | 7 | REG P3 | 18.8 | 3 | 31.9 | 5.5 | 8 | ||
92.70 € | 1 | 6 Days | - | - | 150 | 7 | REG P3 | 18.8 | 3 | 31.9 | 5.5 | 8 | ||
81.70 € | 1 | 6 Days | M7 | 1 | 150 | 6.2 | REG P3 | 11.5 | 3 | 25.3 | 5 | 8 | ||
71.58 € | 1 | 6 Days | M8 | 0.75 | - | 6.2 | REG P3 | 9 | 3 | 28 | 5 | 8 | ||
101.34 € | 1 | 6 Days | M8 | 0.75 | 150 | 6.2 | REG P3 | 9 | 3 | 28 | 5 | 8 |
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.