Flap Sander, Shaft Diameter ⌀3.0 (Part Numbers)
· A high efficiency sander that enables speed polishing with a radial polishing cloth that rotates at high speeds.
· The polishing cloth is spread by the rotational centrifugal force and is ideal for polishing the inner surface of a cylinder.
· Low rotation speed polishing provides a good surface finish for soft workpieces.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
49177
Basic information
| Application | Polishing | Type | Flap with shaft | Shaft Diameter(mm) | ⌀3.0 |
|---|
This page is Flap Sander, Shaft Diameter ⌀3.0, part number 49177.
You can find the detail information about specifications and dimensions on part number 49177.
Configure
Basic Attributes
-
Type
- 491
- 492
-
Outer Diameter(mm)
-
Width(mm)
-
Particle Size(#)
-
Max. Rotational Speed(rpm)
-
Shaft length(mm)
Filter by standard shipping days
-
- All
- 6 Days or Less
- 7 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 49106 |
| 49107 |
| 49117 |
| 49181 |
| 49183 |
| 49184 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (mm) | Width (mm) | Particle Size (#) | Max. Rotational Speed (rpm) | Shaft length (mm) |
|---|---|---|---|---|---|---|---|---|---|
64.75 € | 1 | 6 Days | ⌀10 | - | - | 25,000 | 45 | ||
64.16 € | 1 | 6 Days | ⌀10 | - | 600 | 25,000 | 45 | ||
64.16 € | 1 | 6 Days | ⌀10 | 20 | 600 | 25,000 | 55 | ||
65.44 € | 1 | 6 Days | ⌀25 | - | - | 20,000 | 45 | ||
65.44 € | 1 | 6 Days | ⌀25 | - | - | 20,000 | 45 | ||
65.44 € | 1 | 10 Days | ⌀25 | - | 150 | 20,000 | 45 |
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.