WEICON Dismantling Tool No. 25 (Part Numbers)

WEICON Dismantling Tool No. 25 (AMS), black/blue, black box The Dismantling Tool No. 25 was developed for stripping cables with sheath thickness of up to 5 mm. The cutting blade can be used for round and length cuttings. For the round cut a minimum cable diameter of 25 mm is necessary. The cutting of the outside insulation will be effected by a slight lever movement and simultaneous pressing of the tooth system to the insulation. This tool consists of a shock-resistant polyamide-body with an integrated, double-sided cutting blade and a connected, movable gear wheel. It enables in a safe way to realise length and round cuttings on the cable isolation. The isolation can be cut either at the end or at an intermediate part of the cable.The cutting-depth can be adjusted step by step from 0 to 5 mm, by turning the screw head (steps of 0,1 mm). The blade form enables the dismantling of the cable sheath including possible aluminium shieldings, until a total thickness of 5 mm. The layers below will not be damaged. The cutting process can be realised even at very low temperatures (-10°C) without difficulties. The tool-blade has a hardness of min. 48 HRC and is easily exchangeable.