Carbide B&F Drill CBFD
Click on this image to zoom in.
Click on this image to zoom in.
· In non-ferrous hole drilling, achieves a hole diameter precision and surface precision comparable to conventional reamer machining without the need for pilot holes.
· Effectively reduces machining time by making more use of a limited number of tools in machining, etc.
· Tip angle: 120°
(i)Remark
- Select lower cutting speeds and feed speeds for small diameter sizes. Use step feeding to discharge chips with deep hole drilling (exceeding 5D.) Use water-insoluble cutting oil in order to increase the finishing surface roughness. When machining by rotating the workpiece, carry out concentric machining with the main shaft that is chucking the workpiece. In the case of coring, etc., limit pilot hole misalignment to a maximum of 0.5 mm. With thin workpieces, the hole may shrink after machining and the hole diameter may take on a minus value.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| CBFD6012 |
| CBFD6020 |
| CBFD6033 |
| CBFD6039 |
| CBFD6079 |
| CBFD6085 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Hole diameter (drill diameter) D (mm) | Overall Length L (mm) | Blade diameter tolerance | Flute length (mm) | |
|---|---|---|---|---|---|---|---|---|
74.09 € | 1 | 8 Days | 1.2 | 45 | 0 to 0.003 | 20 | ||
56.91 € | 1 | 8 Days | 2 | 50 | 0 to 0.003 | 25 | ||
78.38 € | 1 | 8 Days | 3.3 | 60 | 0 to 0.003 | 30 | ||
86.10 € | 1 | 8 Days | 3.9 | 70 | 0 to 0.003 | 35 | ||
135.53 € | 1 | 8 Days | 7.9 | 90 | 0 to 0.005 | 50 | ||
139.80 € | 1 | 8 Days | 8.5 | 90 | 0 to 0.005 | 50 |
Loading...
Basic information
| work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Shank Type | Straight Shank |
|---|---|---|---|---|---|
| Coating Y/N | N/A | With/without Oil Hole | N/A | Torsion angle(°) | Straight |
Configure
Basic Attributes
-
Hole diameter (drill diameter) D(mm)
-
Overall Length L(mm)
-
Blade diameter tolerance
- 0 to 0.003
- 0 to 0.005
-
Flute length(mm)
-
Type
- CBFD
Filter by standard shipping days
-
- All
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.