GT Diamond Cutter
[Features]
Lineup: A segmented type designed with an emphasis on speed (NDC-105S), A wave type designed with an emphasis on the cut section (NDC-105W); Outer diameter: 105 mm; Hole diameter: 20 mm (with 15-mm washer); Maximum rotational speed: 14,500 min-1
[Applications]
· Concrete, bricks, block, mortar, etc.
Lineup: A segmented type designed with an emphasis on speed (NDC-105S), A wave type designed with an emphasis on the cut section (NDC-105W); Outer diameter: 105 mm; Hole diameter: 20 mm (with 15-mm washer); Maximum rotational speed: 14,500 min-1
[Applications]
· Concrete, bricks, block, mortar, etc.
(i)Remark
- Match the arrow with the rotational direction of the power tool. Check that there are no bends, cracks or chips on the product. Check that there is no rattling or wobbling after attaching the product. Check that there are no abnormal sounds or vibrations by turning the disk without any load after attaching. If you notice any abnormal sounds or vibrations during work, stop work immediately. Cannot be used for metals, woodwork or for polishing flat surfaces. Use at or below the maximum rotational speed of 14,500 min-1. If there is clogging or the sharpness has deteriorated, sharpen the product using soft materials such as a GC-type grind stone or brick.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
NDC-105S
Basic information
| Product Type | Diamond cutter | Specifications | Dry Type | Application | For concrete, mortar / Tile |
|---|---|---|---|---|---|
| Outer Diameter(mm) | 105 | Hole Diameter(mm) | 20 (with 15-mm washer) | Package depth(mm) | 160 |
| Package width(mm) | 130 | Package height(mm) | 5 | Maximum rotational speed(min-1) | 14,500 |
| Package weight(g) | 114 |
This page is GT Diamond Cutter, part number NDC-105S.
You can find the detail information about specifications and dimensions on part number NDC-105S.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| NDC-105W |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Wheel Type | Blade thickness (mm) | JAN code |
|---|---|---|---|---|---|---|---|
16.98 € | 2 | 6 Days | Wave Type | 2 | 4904781386383 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.