HRRS 6-Flute Long Neck Radius
· A long neck radius end mill; ideal for machining high hardness materials.
· 6-flute type; designed with an emphasis on rigidity.
(i)Remark
- The shank taper angle is a reference value only. Always check by taking actual measurements when there is concern about interference with the workpiece.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Blade length (ℓ) (mm) | Overall Length (L) (mm) | Shank diameter (d) (mm) | R Precision (μm) | O.D. (φ) (mm) | Corner Radius (CR) (mm) | Effective Length (mm) | Neck diameter φd1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
116.34 € | 1 | 6 Days | 6 | 60 | 6 | ±10 | 6 | 0.1 | 21 | 5.95 | ||
116.34 € | 1 | 6 Days | 6 | 60 | 6 | ±10 | 6 | 0.2 | 21 | 5.95 | ||
116.34 € | 1 | 6 Days | 6 | 60 | 6 | ±10 | 6 | 0.3 | 21 | 5.95 | ||
116.34 € | 1 | 12 Days | 6 | 60 | 6 | ±10 | 6 | 0.5 | 21 | 5.95 | ||
116.34 € | 1 | 10 Days | 6 | 60 | 6 | ±10 | 6 | 1 | 21 | 5.95 | ||
144.09 € | 1 | 10 Days | 8 | 80 | 8 | ±15 | 8 | 0.3 | 26 | 7.81 | ||
144.09 € | 1 | 10 Days | 8 | 80 | 8 | ±15 | 8 | 0.5 | 26 | 7.81 | ||
144.09 € | 1 | 10 Days | 8 | 80 | 8 | ±15 | 8 | 1 | 26 | 7.81 | ||
152.21 € | 1 | 12 Days | 10 | 80 | 10 | ±15 | 10 | 0.3 | 31 | 9.81 | ||
152.21 € | 1 | 10 Days | 10 | 80 | 10 | ±15 | 10 | 0.5 | 31 | 9.81 | ||
152.21 € | 1 | 10 Days | 10 | 80 | 10 | ±15 | 10 | 1 | 31 | 9.81 | ||
216.13 € | 1 | 10 Days | 12 | 100 | 12 | ±15 | 12 | 0.3 | 37 | 11.81 | ||
216.13 € | 1 | 10 Days | 12 | 100 | 12 | ±15 | 12 | 0.5 | 37 | 11.81 | ||
216.13 € | 1 | 12 Days | 12 | 100 | 12 | ±15 | 12 | 1 | 37 | 11.81 |
Loading...
Basic information
| work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / Cast Iron / Titanium / Copper | Number of flutes(sheet) | 6 | Type | Long-Neck Radius |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone Group) | Torsion Angle (θ) | 45° Torsion | Coating Details | HARDMAX |
Configure
Basic Attributes
-
Blade length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
R Precision(μm)
-
O.D. (φ)(mm)
-
Corner Radius (CR)(mm)
-
Effective Length(mm)
-
Type
- HHRS
Filter by standard shipping days
-
- All
- 6 Days or Less
- 10 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.