Dial Gauge, Lug Back, Reverse Dial Face
Standard Type, 10 mm Range, 0.01 mm GraduationThis is a standard dial indicator. It offers you the following benefits: Bezel clamp and lifting lever (optional) can be attached to either right or left side. They can be easily installed and removed without tools. No through screw holes on the frame as well as the use of an O-ring prevents water or oil penetration.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
2902A
Basic information
| Display Method | Dial | Measured force(N) | 0.4-1.4 | Accuracy(inch) | ±0.002 |
|---|---|---|---|---|---|
| Additional Spec | Jeweled Bearing, Shockproof | Coaxial Revolution Counter | Yes | Contact Point | Carbide tipped, thread: 4-48UNF |
| Continuous Dial | Yes | Cushioned End Point | Yes | Digital / Analog | Analog |
| Error of Indication One Revolution(inch) | ±0.002 | Functions | ANSI/AGD type | Graduation(inch) | 0.001 |
| Inch-Metric | Inch | Range(inch) | 2 | Range Per Rev.(inch) | 0.1 |
| Stem(inch) | 0.375 | Stem(mm) | 9.52 | Type | ANSI/AGD Standard |
| Mass(g) | 225 |
This page is Dial Gauge, Lug Back, Reverse Dial Face, part number 2902A.
You can find the detail information about specifications and dimensions on part number 2902A.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.