Digital Indicator, Peak Hold ID-C (Part Numbers)
This indicator is the MAX/MIN/RANGE value holding function model It offers the following benefits:
The MAX/MIN/RANGE (run-out value) can be measured. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu. Analogue bar graph in the display (12 different scales switchable). GO/±NG tolerance judgement function. This indicator enables the use of a calculation function for the measured value Ax. Coefficient A is freely definable and x = displacement of the plunger. A USB interface box can be used to set up the indicator from PC via dedicated software.
The MAX/MIN/RANGE (run-out value) can be measured. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu. Analogue bar graph in the display (12 different scales switchable). GO/±NG tolerance judgement function. This indicator enables the use of a calculation function for the measured value Ax. Coefficient A is freely definable and x = displacement of the plunger. A USB interface box can be used to set up the indicator from PC via dedicated software.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
543-300-10
Basic information
| Product Type | Data equipment related goods | Power supply | 1 battery CR2032 | ABS / INC (INC ZERO) | Yes |
|---|---|---|---|---|---|
| Alarm | Low voltage, ABS composition error, overflow error, setting error | Analog Bar Resolution Switchable | Yes | Battery Life | Standard mode: approx. 1 year fast mode: approx. 4.5 month |
| Calculation Function (with formula) | Yes | Contact Point | Carbide ball, thread: M2.5x0.45 | Counting Direction Switchable | Yes |
| DATA/HOLD | Yes | Digimatic Data Output | Yes | Digital Scale | Electrostatic capacitance type absolute linear encoder |
| Digital Step(mm) | 0.001 / 0.01 | Digital/Analog | Digital | Display | LCD, character height 8 mm, 330° rotatable |
| Fast Measurement Mode | Yes | Function lock | Yes | GO/±NG judgement | Yes |
| H MPE (Hysteresis)(mm) | 0.002 | Inch/Metric Switchable | No | Inch-Metric | Metric |
| Max. Permissible ErrorE MPE (Total Range)(mm) | 0.003 | Max. Response Speed | Unlimited | Measurement Frequency (MAX/MIN/Range) | Standard mode: 10 times/s / fast mode: 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
| Measuring Force MPL(N) | ≤1.5 | ON/OFF | Yes | PRESET 3x | Yes |
| Protection | IP42 | R MPE (Repeatability)(mm) | 0.002 | Range(mm) | 12.7 |
| Type | EN ISO Standard | Stem Diameter(mm) | 8 |
This page is Digital Indicator, Peak Hold ID-C, part number 543-300-10.
You can find the detail information about specifications and dimensions on part number 543-300-10.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 543-300B-10 |
| Part Number | Related To | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Additional Spec | Mass (g) |
|---|---|---|---|---|---|---|---|
511.00 € | 1 | 5 Days | Flat Back Plate | 170 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.