Digital Indicator Signal ID-C, ANSI/AGD, Inch/Metric (Part Numbers)
This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54) Measures MAX/MIN/RANGE (run-out value). Saves three different Preset and Tolerance settings. Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE) Calculation function Ax. Coefficient A freely definable, x = displacement of the plungerAnalogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgment function
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
543-352B
Basic information
| Product Type | Data equipment related goods | Power supply | 5-24 V DC / 100mA (max) | ABS / INC (INC ZERO) | Yes |
|---|---|---|---|---|---|
| Additional Spec | Flat Back | Alarm | Low voltage, ABS composition error, overflow error, setting error | Analog Bar Resolution Switchable | Yes |
| Calculation Function (with formula) | Yes | Contact Point | Carbide ball, thread: No.4-48UNF | Counting Direction Switchable | Yes |
| Digital Scale | Electrostatic capacitance type absolute linear encoder | Digital Step(inch) | 0.00005 / 0.0001 / 0.0005 | Digital Step(mm) | 0.001 / 0.01 |
| Digital/Analog | Digital | Display | LCD, character height 8 mm | Function lock | Yes |
| GO/±NG judgement | Yes | GO/±NG judgement via LED | Yes | H MPE (Hysteresis)(inch) | 0.0001 |
| H MPE (Hysteresis)(mm) | 0.002 | Inch/Metric Switchable | Yes | Inch-Metric | Inch/Metric |
| Max. Permissible Error E MPE (Total Range)(inch) | ±0.0001 | Max. Permissible ErrorE MPE (Total Range)(mm) | 0.003 | Max. Response Speed | Unlimited |
| Measurement Frequency (MAX/MIN/Range) | Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement) | Measuring Force(N) | ≤2.5 | Measuring Force MPL(N) | ≤2.5 |
| ON/OFF | Yes | PRESET 3x | Yes | Protection | IP54 |
| R MPE (Repeatability)(inch) | 0.0001 | R MPE (Repeatability)(mm) | 0.002 | Range(inch) | 0.5 |
| Range(mm) | 12.7 | Remarks | ANSI/AGD type | Signal Input: No-voltage Input, (PRESET_RECALL/ZERO, Hold_RESET) | Yes |
| Signal Output:(+NG, OK, -NG) | Yes | Type | ASME/ANSI/AGD Standard | Mass(g) | 285 |
| Stem Diameter(mm) | 9.52 |
This page is Digital Indicator Signal ID-C, ANSI/AGD, Inch/Metric, part number 543-352B.
You can find the detail information about specifications and dimensions on part number 543-352B.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.