Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Spiral Taps（Coating Type：Non-Coated）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Select to compare

› Configure now
Starting from^∗ ：	7.97 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Trapezoidal Thread Cutting Tap _TMB 29100

WALTER PROTOTYP

HSS-E, Cutting Blade 24 x P, 5° Left Torsion, 200 to 900 N/mm² Work Material or 28 HRC, for Long- and Short-Chipping Work Material

Select to compare

› Configure now
Starting from^∗ ：	578.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

OSG

Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	17.31 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	14.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Aluminum, EX-AL-SFT

OSG

Suitable for tapping blind hole of nonferrous metal such as aluminum and its alloys, and die-cast

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	10.18 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT

OSG

Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	10.88 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	14.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	11.72 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MT Series High-Speed Steel Spiral Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	6.51 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT

OSG

Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	13.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel / Deep Holes Long Shank, LT-SUS-DH-SFT

OSG

Ideal for Deep Hole Drilling of Stainless Steel Over 2D

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.91 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	8.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Low Spiral LW-SFT

OSG

Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	9.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT

OSG

Suited for Drilling Blind Holes in Materials That Leave Coil Shaped Connected Cutting Debris Such as Carbon Steel, Alloyed Steel, and Non-Ferrous Metals

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	8.78 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for High-Carbon Steels EX-HC-SFT

OSG

Suitable for drilling holes in materials such as high carbon materials greater than medium carbon steel, die steel, alloyed steel.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	16.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Carbide Spiral Tap OT-SFT

OSG

Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machine

Select to compare

› Configure now
Starting from^∗ ：	72.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT

OSG

Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	8.89 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	84.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT

OSG

Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	11.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM

OSG

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	10.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W

OSG

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	9.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L

OSG

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	12.94 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT

OSG

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	50.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

General Purpose Long Shank Spiral Tap (for Metric Threads)

OSG

Select to compare

› Configure now
Starting from^∗ ：	22.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

N Spiral Tap NSP

NACHI(FUJIKOSHI)

[Features]
It can be used for machining threaded holes.
[Features]
This product can be used universally as it is not treated and its spiral groove can drain chips.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	8.72 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	WALTER PROTOTYP	OSG	OSG	OSG	OSG	OSG	OSG	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NACHI(FUJIKOSHI)
Product Series	Spiral Tap Series, General Purpose EX-SFT	Trapezoidal Thread Cutting Tap _TMB 29100	Spiral Tap Series, Short Chamfer Type, EX-SC-SFT	Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT	Spiral Tap Series, for Aluminum, EX-AL-SFT	Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT	Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	MT Series High-Speed Steel Spiral Tap	Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT	Spiral Tap Series, for Stainless Steel / Deep Holes Long Shank, LT-SUS-DH-SFT	Spiral Tap Series, for Stainless EX-SUS-SFT	Spiral Tap Series, Low Spiral LW-SFT	Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT	Spiral Tap Series, for High-Carbon Steels EX-HC-SFT	Spiral Tap Series, Carbide Spiral Tap OT-SFT	Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT	Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT	Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT	Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM	Spiral Tap Series, General Purpose Whitworth Screw, EX-SFT-W	Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L	Spiral Tap Series, Ultra-Synchronized Tap, US-AL-SFT	General Purpose Long Shank Spiral Tap (for Metric Threads)	N Spiral Tap NSP
Starting from^∗	7.97 € *Unit price with basic configuration Volume Discount	578.96 € *Unit price with basic configuration	17.31 € *Unit price with basic configuration Volume Discount	14.47 € *Unit price with basic configuration Volume Discount	10.18 € *Unit price with basic configuration Volume Discount	10.88 € *Unit price with basic configuration Volume Discount	14.52 € *Unit price with basic configuration Volume Discount	11.72 € *Unit price with basic configuration Volume Discount	6.51 € *Unit price with basic configuration Volume Discount	13.15 € *Unit price with basic configuration Volume Discount	25.91 € *Unit price with basic configuration Volume Discount	8.81 € *Unit price with basic configuration Volume Discount	9.50 € *Unit price with basic configuration Volume Discount	8.78 € *Unit price with basic configuration Volume Discount	16.26 € *Unit price with basic configuration Volume Discount	72.40 € *Unit price with basic configuration	8.89 € *Unit price with basic configuration Volume Discount	84.11 € *Unit price with basic configuration Volume Discount	11.71 € *Unit price with basic configuration Volume Discount	10.88 € *Unit price with basic configuration Volume Discount	9.74 € *Unit price with basic configuration Volume Discount	12.94 € *Unit price with basic configuration Volume Discount	50.57 € *Unit price with basic configuration Volume Discount	22.82 € *Unit price with basic configuration	8.72 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	Same day	6 Days	Same day	Same day	6 Days	Same day	Same day	6 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day
Specifications	Stock
Screw Types	Meter / Unified	Trapezoid	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Unified / Whitworth	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Sewing Machine	Whitworth	Meter	Meter	Meter	Meter
Screw size (Nominal)	1UN ～ M56	Tr8 ～ Tr18	M8 ～ M22	M2 ～ M36	M4 ～ M8	M2.5 ～ M10	M3 ～ M24	M1.4 ～ M48	M2 ～ M24	M2 ～ M6	M3	1UN ～ M42	M6	M5 ～ M24	M10 ～ M12	M3 ～ M12	M2.6 ～ M10	M16	M8 ～ M16	SM1/4 ～ SM15/64	W1/8	M3 ～ M30	M18 ～ M24	M4	M4
Pitch (P), Number of Threading(mm)	0.25 ～ 48	1.5 ～ 4	1 ～ 2.5	0.4 ～ 4	0.7 ～ 1	0.45 ～ 1.5	0.5 ～ 3	0.3 ～ 5	0.4 ～ 3	0.4 ～ 1	0.5	0.4 ～ 48	1	0.8 ～ 3	1.25 ～ 1.5	0.5 ～ 1.75	0.45 ～ 1.5	2	1.25 ～ 1.5	20 ～ 56	40	0.5 ～ 3.5	1.5 ～ 3	0.7	0.7
Chamfer threads (Lcf)	2.5P ～ 3P	-	1.5P	2.5P	2.5P	2.5P	2.5P	3P	2.5 P	3P	2.5P	2.5P ～ 3P	2.5P	2.5P	3P	1.5P ～ 2.5P	2.5P	3P	2.5P	2.5P	2.5P	2.5P	3P	2.5	2.5
Tool Material Type	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Cobalt HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	High-speed steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]
Tap Type	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	-	Spiral Tap
Hole type	For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	For through hole / For blind hole
Coating Y/N	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	-	N/A
Coating Type	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	30 ～ 205	90 ～ 225	70 ～ 115	80 ～ 300	52 ～ 70	44 ～ 75	100 ～ 150	34 ～ 185	40 ～ 120	40 ～ 62	120	40 ～ 175	62	60 ～ 120	75 ～ 82	46 ～ 82	44 ～ 75	150	70 ～ 95	42 ～ 65	46	46 ～ 135	100 ～ 120	100	52

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Trapezoid
Clear

Screw size (Nominal)
No.10-32UNF

No.10-24UNC

No.2-56UNC

No.3-48UNC

No.4-48UNF

No.4-40UNC

No.5-44UNF

No.5-40UNC

No.6-40UNF

No.6-32UNC

No.8-36UNF

No.8-32UNC

1UN

1UNS

G 1"

M1

PF 1

UNC 1"

UNF 1"

W1

1'-12UNF

1-8UNC

1'-8UNC

1"1/2UN

W1"1/2

1 1/2-8UN

1"1/4UN

W1"1/4

1 1/4-8UN

1"1/8UN

W1"1/8

1 1/8-8UN

1/2UN

G 1/2

PF 1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1/2W12

1"3/4UN

1 3/4-8UN

1"3/8UN

W1"3/8

1 3/8-8UN

1/4UN

G 1/4

PF 1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4W20

1 5/8-8UN

1 7/8-8UN

1'W8

G 1/8

PF 1/8

SM1/8

W1/8

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

M1.4

M1.6

M1.7

M1.8

M2

UNC 2

2-8UN

M2.2

M2.3

M2.5

M2.6

M3

3/4UN

G 3/4

PF 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/4W10

3/8UN

G 3/8

PF 3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-16UNC

3/8W16

M3 - M10

M3 - M12

SM3/16

W3/16

3/16W24

SM3/32

M3.5

M4

MF4

No4UN

UNC 4

UNF 4

№4-40UNC

M4.5

5M

M5

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G 5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

5.5M

M5.5

M6

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

G 7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-20UNF

7/16-14UNC

7/16W14

M8

MF8

No8UN

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

M10

MF10

No10UN

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M22

MF22

Tr 22

M23

M24

MF24

Tr 24

M25

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

M30

MF30

Tr 30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

18

19

20

24

28

32

36

40

44

48

56
Clear

Chamfer threads (Lcf)
1.5 P

1.5P

2P

2.5

2.5 P

2.5P

3P

5P

5.5P

7P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiCN
- TiN
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

39

40

41

42

44

44.5

45

46

47.62

48

49.21

50

50.8

51

52

53

53.98

55

55.28

55.64

55.92

56

58

59

60

60.32

62

62.52

62.65

63

63.5

65

66

67

69.06

69.42

69.71

70

72

74.61

75

79.03

79.31

80

80.17

82

85

85.72

87

88

89

89.12

89.18

90

91.28

95

96

96.84

98.97

99.21

100

102

105

108

109

109.65

110

112

113.5

115

118

119

120

125

130

130.175

130.2

135

140

145

150

155

160

165

170

175

180

185

190

195

200

205

220

224

225

230

250

260

270

280

290

300

315
Drawing

Clear

Brand

- MISUMI (1)
- Cost Efficient Products ()
- OSG (22)
- NACHI(FUJIKOSHI) (1)
- WALTER PROTOTYP (1)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- TRUSCO NAKAYAMA (0)
- YAMAWA MFG (0)
- ISHIHASHI (0)
- GEDORE (0)
- SANDVIK (0)
- HAZET (0)
- GUHRING (0)
- WERA (0)
- ESCO (0)
- FEIN (0)
- SKC (0)
- REX TOOLS (0)
Clear