Shipping Days |
|
---|
?* Information on days to ship
Groove-Free Tap Series VP New Roll VP-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
Starting from∗ : | 19.22 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series, Tin Coated, TIN-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.
Starting from∗ : | 17.52 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series for Steel NRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris
Starting from∗ : | 9.65 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series For Non-Ferrous Alloy B-NRT
OSG
Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.
Starting from∗ : | 9.31 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.
Starting from∗ : | 34.97 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
Groove-Free Tap Series For Non-Ferrous Alloy B-HRT
OSG
Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.
Starting from∗ : | 8.41 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
Starting from∗ : | 26.63 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series for Steel HRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris
Starting from∗ : | 8.41 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.
Starting from∗ : | 23.98 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
Dry Processing Roll Tap OL+RZ/OL-RZ
YAMAWA MFG
For the following M6 sizes, there is a rolling tap that enables tap machining without lubrication for burred thin iron plates and comparatively short steel materials.
Starting from∗ : | 20.83 € |
---|---|
Min. Shipping Days : | Quote |
*Unit price with basic configuration
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.
Starting from∗ : | 23.98 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
NACHI(FUJIKOSHI)
Suitable for thread rolling of mild steel, stainless steel below 20HRC of hardness.
Starting from∗ : | 13.47 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Starting from∗ : | 15.41 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Starting from∗ : | 12.55 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.
Starting from∗ : | 26.63 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
Starting from∗ : | 20.42 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT
OSG
Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Reduces burrs, whiskers, and tears.
Starting from∗ : | 20.42 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
Groove-Free Tap Series VP New Roll Short Chamfer Long Shank VP-LT-SC-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.
Starting from∗ : | 26.63 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.
Starting from∗ : | 38.80 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
YAMAWA MFG
A roll tap suited for steel materials (carbon steel, alloyed steel, stainless steel etc).
Starting from∗ : | 8.80 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
Non-Ferrous Metal Roll Tap N+RS/N-RS
YAMAWA MFG
Roll tap suitable for threading of non-ferrous materials (aluminum casting, aluminum die-casting, brass, etc.)
Starting from∗ : | 11.58 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
Brand |
---|
Product Series |
Starting from∗ |
Min. Shipping Days |
Screw Types |
Screw size (Nominal) |
Pitch (P), Number of Threading(mm) |
Chamfer threads (Lcf) |
Tool Material Type |
work material |
Tap Type |
Hole type |
Coating Y/N |
Coating Type |
Overall Length (L)(mm) |
Brand | OSG | OSG | OSG | OSG | TANOI MFG | OSG | OSG | OSG | TANOI MFG | YAMAWA MFG | TANOI MFG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | TANOI MFG | YAMAWA MFG | YAMAWA MFG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Groove-Free Tap Series VP New Roll Short Chamfer Long Shank VP-LT-SC-NRT | ||||||||||||||||||||
Starting from∗ | 19.22 € *Unit price with basic configuration Volume Discount | 17.52 € *Unit price with basic configuration Volume Discount | 9.65 € *Unit price with basic configuration Volume Discount | 9.31 € *Unit price with basic configuration Volume Discount | 34.97 € *Unit price with basic configuration Volume Discount | 8.41 € *Unit price with basic configuration Volume Discount | 26.63 € *Unit price with basic configuration | 8.41 € *Unit price with basic configuration Volume Discount | 23.98 € *Unit price with basic configuration Volume Discount | 20.83 € *Unit price with basic configuration Volume Discount | 23.98 € *Unit price with basic configuration Volume Discount | 13.47 € *Unit price with basic configuration | 15.41 € *Unit price with basic configuration | 12.55 € *Unit price with basic configuration | 26.63 € *Unit price with basic configuration | 20.42 € *Unit price with basic configuration Volume Discount | 20.42 € *Unit price with basic configuration Volume Discount | 26.63 € *Unit price with basic configuration | 38.80 € *Unit price with basic configuration Volume Discount | 8.80 € *Unit price with basic configuration Volume Discount | 11.58 € *Unit price with basic configuration Volume Discount |
Min. Shipping Days | 7 Days | 7 Days | 7 Days | 7 Days | 5 Days | 7 Days | 7 Days | 7 Days | 5 Days | Quote | 5 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 5 Days | 5 Days | 5 Days |
Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
Screw size (Nominal) | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 | M3.5 |
Pitch (P), Number of Threading(mm) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |
Chamfer threads (Lcf) | 2P ~ 4P | 2P ~ 4P | 2P ~ 4P | 2P ~ 4P | 1P ~ 2P | 2.5P ~ 4P | 2P ~ 4P | 2.5P ~ 4P | 1P ~ 4P | 4P | 1P ~ 4P | 2P ~ 4P | 2P ~ 4P | 2P ~ 4P | 2P ~ 4P | 1P | 8P | 1P | 1P ~ 2P | 2P ~ 4P | 2P ~ 4P |
Tool Material Type | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
Tap Type | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap |
Hole type | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | - | For blind hole | For blind hole | For blind hole | - | For through hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For blind hole | - | For through hole / For blind hole | For through hole / For blind hole |
Coating Y/N | Available | Available | NA | Available | Available | NA | Available | NA | Available | Available | Available | NA | NA | NA | Available | Available | Available | Available | Available | NA | NA |
Coating Type | TiCN | TiN | Non-Coated | TiN | TiCN | Non-Coated | TiCN | Non-Coated | Other | TiCN | TiCN | - | - | - | TiN | TiCN | TiCN | TiCN | TiCN | - | - |
Overall Length (L)(mm) | 48 | 48 | 48 | 48 | 48 | 48 | 80 ~ 120 | 48 | 48 | 52 | 48 | 48 | 48 | 48 | 80 ~ 120 | 48 | 48 | 80 | 70 ~ 120 | 48 ~ 52 | 52 |
Loading...
Please assist us in our effort to improve this site.
Please give us a feedback on the MISUMI e-Catalog.
Thank you for your cooperation.
If you wish to receive our response,please use the inquiry form.