Chamfer, V-Grooves（Single blade, two blades：Single blade Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
3-Flute, Chamfering Cutter (Positive Type) HSCT-P
OSG
End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Configure nowStarting from∗ ： 73.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
OSG
End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P
OSG
Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Chamfering Cutter for SV Chamfering Process
UNION TOOL
[Features]
· Carbide spiral chamfering cutter
· Half Taper Angle of 45°
· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.Configure nowStarting from∗ ： 135.77 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hole Chamfering Leading Drill V Coating Powder HSS Long Shank
OSG
Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.Configure nowStarting from∗ ： 23.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 101.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Center Reamer (Taper Shank)
FUKUDA
A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.Configure nowStarting from∗ ： 249.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 60° Carbide DLC Coating
IWATA TOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 113.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° Carbide DLC Coating
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 92.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° Carbide Long Type
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 104.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° Carbide Long Type DLC Coating
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Configure nowStarting from∗ ： 121.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Sharp SP 90° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.- Volume Discount
Configure nowStarting from∗ ： 98.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Toglon Miniature Hard SP 90° ALT Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Configure nowStarting from∗ ： 101.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Aluminum Samurai
FUJIGEN
[Features]
· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.
· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.
· Achieves high runout accuracy within 5/1,000 mm.Configure nowStarting from∗ ： 166.43 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Angular Cutter with TAG Handle G2
ASAHI TOOLS
Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table grooveConfigure nowStarting from∗ ： 162.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CMC MC Chamfering Cutter G2
ASAHI TOOLS
Soldering shape, Angle tolerance ±15'.
Shape accuracy with straight edge.
Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resin
Single-edged blade
2 blades.Configure nowStarting from∗ ： 113.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank
OKAZAKI SEIKO
Working material aluminium/copper
Tool grade, cobalt high-speed steel
Tip angle (θ) 90
With or without coating: with coating
Coating type, TiN.- Volume Discount
Configure nowStarting from∗ ： 99.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI SEIKO
1-flute type. For steel and stainless steel. All products are TiN coated.- Volume Discount
Configure nowStarting from∗ ： 371.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
3-flute type. For steel and stainless steel. All products are TiN coated.- Volume Discount
Configure nowStarting from∗ ： 102.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SVM Chamfering Mill, Non-Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.- Volume Discount
Configure nowStarting from∗ ： 83.38 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SVMA Chamfering Mill, OK Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.Configure nowStarting from∗ ： 104.53 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Solid V Point Mill VSE VSESS Type
DIJET
It is a tool with excellent abrasion resistance.- Volume Discount
Configure nowStarting from∗ ： 90.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
For Mentatsu Aluminum AL-VME
DIJET
A tool with excellent abrasion resistance.
Working material, aluminium
Single-edged blade
Tool type, carbide
Tip angle (θ) 90.Configure nowStarting from∗ ： 81.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
For Mentatsu Aluminum (Long Shank) AL-VME-LS
DIJET
A tool with excellent abrasion resistance.
Material of work, aluminium, single-edged
Tool grade, carbide
Tip angle (θ) 90.- Volume Discount
Configure nowStarting from∗ ： 94.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
NEW Chamfering Drill
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy positioning.
· Uses Cobalt HSS- Volume Discount
Configure nowStarting from∗ ： 46.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMC-4
KYOWA SEIKO
4 straight cutting edges.
45° (one-sided angle)
Material, general steel/heat-treated steel/stainless steel/cast iron/aluminium
Single-edged blade
Tool grade, carbideConfigure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Chamfering Tool CFT (SKH57)
TAIYO-TOOL
[Applications]
· Hole chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· High-speed steel
[Coating Y/N] N
[Coating Type] Non-Coated
[Flute No.] 1-FluteConfigure nowStarting from∗ ： 134.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Corner Round Cutter MCRC (SKH56)
TAIYO-TOOL
[Applications]
· Round chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· High-speed steel
[Coating Y/N] N
[Coating Type] Non-Coated
[Flute No.] 1-FluteConfigure nowStarting from∗ ： 98.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 116.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 117.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
OptiMill® Chamfering Mill (4 Flutes)
MAPAL
[Features]
· Dedicated for chamfering.
· The 4-flute specification emphasizes efficiency.
· No flat part at the tip.
[Applications]
· Work materials: Carbon steel, alloy steel, stainless steel, cast iron, light alloy.Configure nowStarting from∗ ： 75.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chamfering Reamer (3-Flute) MC
DAIICHITOOL
[Features]
Bevel reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.Configure nowStarting from∗ ： 56.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Center Reamer CF
DAIICHITOOL
[Features]
A centre reamer with an overall length of 45 to 99 mm and a handle diameter of 6 to 12 mm.Configure nowStarting from∗ ： 33.97 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
TiN Coating, Long Shank TIN-LS-NC-LDS
OSG
[Specifications]
· Tip angle tolerance is 90° ±1°.- Volume Discount
Configure nowStarting from∗ ： 94.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure nowStarting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
C Chamfering Cutter NSCV
NS TOOL
[Features]
· It allows easy chamfer edge machining.
[Part Number: NSCV-4]
cutting diameter (D) (mm): 4
Blade length (mm): 2
Shank diameter (d) (mm): 4
Overall length (mm): 60
Minimum order quantity: 1 pc.
[Part Number: NSCV-6]
cutting diameter (D) (mm): 6
Blade length (mm): 3
Shank diameter (d) (mm): 6
Overall length (mm): 70
Minimum order quantity: 1 pc.- Volume Discount
Configure nowStarting from∗ ： 95.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Configure nowStarting from∗ ： 93.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.Configure nowStarting from∗ ： 93.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Configure nowStarting from∗ ： 125.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.Configure nowStarting from∗ ： 110.87 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.Configure nowStarting from∗ ： 134.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | UNION TOOL | OSG | FUKUDA | FUKUDA | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | FUJIGEN | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | DIJET | DIJET | NT TOOL | KYOWA SEIKO | TAIYO-TOOL | TAIYO-TOOL | SANDVIK | SANDVIK | MAPAL | DAIICHITOOL | DAIICHITOOL | OSG | OSG | NS TOOL | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY |
| Product Series | 3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P | Hole Chamfering Leading Drill V Coating Powder HSS Long Shank | CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000 | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | |||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 73.51 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 135.77 € *Unit price with basic configuration | 23.64 € *Unit price with basic configuration | 101.77 € *Unit price with basic configuration Volume Discount | 249.16 € *Unit price with basic configuration | 113.05 € *Unit price with basic configuration | 92.97 € *Unit price with basic configuration | 104.35 € *Unit price with basic configuration | 121.08 € *Unit price with basic configuration | 98.33 € *Unit price with basic configuration Volume Discount | 101.01 € *Unit price with basic configuration | 166.43 € *Unit price with basic configuration | 162.11 € *Unit price with basic configuration | 113.60 € *Unit price with basic configuration | 99.42 € *Unit price with basic configuration Volume Discount | 371.94 € *Unit price with basic configuration Volume Discount | 102.41 € *Unit price with basic configuration Volume Discount | 83.38 € *Unit price with basic configuration Volume Discount | 104.53 € *Unit price with basic configuration | 90.07 € *Unit price with basic configuration Volume Discount | 81.26 € *Unit price with basic configuration | 94.60 € *Unit price with basic configuration Volume Discount | 46.53 € *Unit price with basic configuration Volume Discount | 109.96 € *Unit price with basic configuration | 134.81 € *Unit price with basic configuration | 98.66 € *Unit price with basic configuration | 116.87 € *Unit price with basic configuration | 117.96 € *Unit price with basic configuration | 75.54 € *Unit price with basic configuration | 56.40 € *Unit price with basic configuration | 33.97 € *Unit price with basic configuration | 94.89 € *Unit price with basic configuration Volume Discount | 79.82 € *Unit price with basic configuration | 95.50 € *Unit price with basic configuration Volume Discount | 93.69 € *Unit price with basic configuration | 93.69 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 125.71 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 110.87 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration | 134.27 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days |
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Centering (Positioning) / Hole Chamfer | Round Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Chamfering/Horizontal | Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal / V Groove / Drilling / Other | Chamfering/Horizontal | Chamfering/Horizontal | Hole Chamfer | Chamfering/Horizontal | Hole Chamfer | Round Chamfer | Chamfering/Horizontal | Chamfering/Horizontal | - | Chamfering/Horizontal | Centering (Positioning) | - | Chamfering/Horizontal | Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling |
| Tip angle (θ) | 90 | 90 | 90 | 90 | 90 | - | 60 ～ 90 | 60 | 90 | 90 | 90 | 90 | 90 | 90 | 45° ～ 60° | 60 ～ 90 | 90 | 90 | 90 | 90 ～ 120 | 90 ～ 120 | 60 ～ 120 | 90 | 90 | 90 | - | 60 ～ 90 | - | 90° | - | Center Hole Angle: 90° | 60° ～ 90° | 60° ～ 90° | 90 | 90° | 45° | 60 | 120 | 60 | 90 | 60 | 90 | 120 | 60 | 90 |
| Tool Diameter (D)(mm) | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 0.8 ～ 1 | 3 ～ 25 | - | - | 2 ～ 16 | 1.2 ～ 16 | 3 ～ 12 | 3 ～ 12 | 0.6 ～ 4 | 0.1 ～ 1.5 | 4 ～ 10 | 15 ～ 100 | 10 ～ 60 | 30 | 66 | 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 10 | 3 ～ 10 | - | - | 10 ～ 20 | 2.6 ～ 23 | 8 ～ 12 | 6 ～ 20 | - | 8 ～ 46 | 6 ～ 50 | 12 | - | 4 ～ 6 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 |
| work material | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / High Hardness Steel[○] | Quenched and tempered steel[○] / High Hardness Steel[○] | Aluminum[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] | Aluminum[◎] | General Steel[○] / High Hardness Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | - | - | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | - | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | N/A | N/A | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | Available | Available | - | - | - | N/A | - | - | - | N/A | N/A | - | Available | Available | Available | N/A | Available | - | - | - | - | - | - | - | - | - |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide | Cobalt HSS | Cobalt HSS | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | - | Cobalt HSS | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Y/N | N/A | N/A | N/A | N/A | Available | N/A | N/A | Available | Available | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | Available | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | N/A | Available | - | - | Available | Available | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | Available | Available |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | - | TiCN | Non-Coated | Non-Coated | DLC | DLC | - | DLC | Other | ALT | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | TiN | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | Non-Coated | Other | - | Other | - | - | TiN | - | - | - | - | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN |
| R Size (R)(mm) | - | - | - | - | - | 0.5 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.3 ～ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 7.92
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 9.53
- 10
- 10.2
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 12.7
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 15.88
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Brand
-
- MAKOTOLOY (22)
- OSG (18)
- IWATA TOOL (9)
- FUKUDA (5)
- OKAZAKI SEIKO (5)
- DIJET (3)
- KYOWA SEIKO (3)
- TAIYO-TOOL (3)
- ASAHI TOOLS (2)
- DAIICHITOOL (2)
- NS TOOL (2)
- NT TOOL (2)
- SANDVIK (2)
- THE CUT (2)
- FUJIGEN (1)
- MAPAL (1)
- UNION TOOL (1)
- BIG KAISER (0)
- STAR-M (0)
- DIXI (0)
- SPEED TIGER (0)
- EIKOSHA (0)
- SANKO MFG (0)
- GUHRING (0)
- 7 LEADERS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Chamfer, V-Grooves
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.