Welding Rods（Product Type：Welding rod Page 2）

?* Information on days to ship and prices

• 

  Coated Arc Welding Rod (Soft Steel to 550 MPa Grade Steel) TBI-24【1-4 Pieces Per Package】

  KOBE STEEL

  Lime-titania welding rod with excellent welding workability, X-ray performance and mechanical properties. Excellent workability in all positions, and since coating agent contains large amounts of iron powder, welding speed is quick and re-arc performance is also excellent to enhance work efficiency.

  Select to compare

  Configure now
  Starting from∗ ：	168.42 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  TIG Soldering Rod for Soft Steel YT-28

  NITTETSUSUMIKIN

  [Features]
  · Suitable for welding of thin plates and back bead welding of mild steel, 490 MPa high-tensile steel and low-temperature killed aluminum steel

  Select to compare

  Configure now
  Starting from∗ ：	64.66 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Coated Rod for Soft Steel to 550 MPa Grade Steel Z-44【1-10 Pieces Per Package】

  KOBE STEEL

  Suitable for thin middle shelves. Contains iron powder, and has excellent re-arc performance. The bead spreads out well, and it is suitable for tuck, intermittent, and fillet welding. Vertically downward motion is also possible under 3.2 mm.

  Select to compare

  Configure now
  Starting from∗ ：	30.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Coated Rod for Soft Steel to 550 MPa Grade Steel RB-26

  KOBE STEEL

  General machinery, lightweight thin steel plates, light structure welding and decorative welding. Features good workability especially for flat welding and fillet welding. Less sputter, easy slug control and removal. Shallow welding permeation obtains beautiful, lustrous beads. Suitable for welding with an emphasis on appearance. The large diameter rod is optimal for decorative welding.

  Select to compare

  Configure now
  Starting from∗ ：	307.16 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Coated Rod for Soft Steel to 550 MPa Grade Steel B-14【1-4 Pieces Per Package】

  KOBE STEEL

  It is used for the welding of general structures on vehicles, and in construction. Suitable for protruding and fillet welding of thin sheets around 20 mm or less. Provides stable slag covering for flat welding and beautiful, glossy beads. Even greater weld permeation in high titanium oxides and lime titania which is suitable for welded joints and even thin plates that require ample welding permeation.

  Select to compare

  Configure now
  Starting from∗ ：	59.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Coated Rod for Soft Steel to 550 MPa Grade Steel B-17【1-4 Pieces Per Package】

  KOBE STEEL

  It is used for the welding of general structures on vehicles, and in construction. Suitable for protruding and fillet welding of thin sheets around 20 mm or less. Provides stable slag covering for flat welding and beautiful, glossy beads. Even greater weld permeation in high titanium oxides and lime titania which is suitable for welded joints and even thin plates that require ample welding permeation.

  Select to compare

  Configure now
  Starting from∗ ：	63.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Coated Rod for Soft Steel to 550 MPa Grade Steel BI-14

  KOBE STEEL

  It is used for the welding of general structures on vehicles, and in construction. Suitable for protruding and fillet welding of thin sheets around 20 mm or less. Provides stable slag covering for flat welding and beautiful, glossy beads. Even greater weld permeation in high titanium oxides and lime titania which is suitable for welded joints and even thin plates that require ample welding permeation.

  Select to compare

  Configure now
  Starting from∗ ：	164.92 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel TIG Rod TG-308

  TASETO

  The various characteristics of welded metals show performance equivalent to or better than the base material as the welding material is for 18Cr-8Ni stainless steel (SUS34).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	163.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel TIG Rod TG-308L

  TASETO

  Welding materials for use with SUS304 and SUS304L stainless steels. Enhanced grain boundary corrosion resistance by reducing carbon content.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	168.25 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel TIG Rod TG-316

  TASETO

  A welding material for 18Cr-12Ni-2Mo stainless steel (SUS 316) that contains a large amount of Ni and Mo to provide excellent corrosion resistance to seawater, non-oxidizing acids such as acetic acid, diluted sulfuric acid and salts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	212.44 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel TIG Rod TG-316L

  TASETO

  Enhanced grain boundary corrosion resistance by reducing carbon content. It is primarily used for welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel (SUS316L), which is used for important chemical equipment / instruments where corrosion resistance is required.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	107.87 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel TIG Rod TG-309

  TASETO

  Stainless steel welding material composed of 25Cr-12Ni. Since it contains a high volume of Cr and Ni, it can be used to weld dissimilar materials with carbon steel / low-alloy steel and stainless steel.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	176.22 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel Welding Rod RNY308

  TASETO

  18Cr-8Ni stainless steel (SUS304) welding bar for general use. The lime titania coating allows for welding in all positions. Excellent weldability where welded metals demonstrate properties equal or greater than the base material.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	57.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel Welding Rod RNY308L

  TASETO

  Special care has been taken to minimize the carbon of welded metal. Welding rod with a low risk of intergranular corrosion, making it indispensable in welding corrosion resistant containers which cannot be subjected to immobilizing heat treatment. The lime titania coating allows for welding in all positions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	57.94 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel Welding Rod RNY316L

  TASETO

  Low carbon stainless steel welding bar that is the first of its kind to be manufactured in Japan. Immobilization heat treatment after welding of low carbon 18Cr-12Ni-2Mo stainless steel (SUS316L) plate, casting, etc., for important chemical equipment can be omitted due to the low risk of intergranular corrosion. The lime titania coating allows for welding in all positions.

  Select to compare

  Configure now
  Starting from∗ ：	73.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Coated Arc Welding Rod for Cast Iron GRICAST1

  hishiko

  [Features]
  · GRICAST1 is an arc welding electrode for cast iron use that has a graphite-based coat and a pure Ni core wire, enabling stable welding to be done using a low current.
  · Welded parts harden very little to enable simple machining that is suitable for welding parts under water pressure.
  · Excellent weldability where blow holes, cracks and other welding defects are unlikely, as well as incredible X-ray performance and mechanical properties.
  · Welded metal expands and shrinks very little and has excellent crack resistance.
  · Welded metal is white in color.
  

  Select to compare

  Configure now
  Starting from∗ ：	846.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Coated Arc Welding Rod for Cast Iron GN-311

  hishiko

  [Features]
  · GN-311 is a coated arc welding electrode for cast iron use that uses graphite-based with a 36%Ni-Fe cladded core wire, and shows none of the rod scorching associated with general alloy core wires.
  · Featuring a composition that improves plating performance after welding by reducing Ni down to 40% or less.
  · Welded metal is low Ni rather than typical Fe-Ni, so it is more suited to build up welding of cast iron which requires hardness and also enables surface treatment for materials such as hard Cr plating to be easily performed.
  · Welded metal has excellent crack resistance and mechanical properties.
  

  Select to compare

  Configure now
  Starting from∗ ：	489.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pure Ni Type TIG Welding Rod for Cast Iron Welding GN-100T

  hishiko

  [Features]
  · GN-100T is a TIG welding rod used for welding pure Ni-based cast iron. Cold welding is possible, which results in favorable physical properties for the deposited weld metal, with little expansion/contraction and exceptional crack resistance. Well suited to welding especially thick things and components requiring great strength.
  · Workability is good, hardening of welds is less, and finishing work is easy.
  

  Select to compare

  Configure now
  Starting from∗ ：	648.14 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Fe-Ni Type TIG Welding Rod for Cast Iron Welding GN-55T

  hishiko

  [Features]
  · GN-55T is a TIG welding rod used for welding cast iron with a chemical composition of 45%Fe-55%Ni, which allows cold welding to be performed, providing favorable physical properties for the deposited weld metal, with little expansion/contraction and exceptional crack resistance. Well suited to welding especially thick things and components requiring great strength.
  · Workability is good, hardening of welds is less, and finishing work is easy.
  

  Select to compare

  Configure now
  Starting from∗ ：	595.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Fe-Ni Type TIG Welding Rod for Cast Iron GN-311T

  hishiko

  [Features]
  · GN-311T is a TIG welding rod with a chemical composition of 60%Fe-40%Ni used for welding cast iron.
  · Featuring a composition that improves plating performance after welding by reducing Ni down to 40% or less.
  · Welded metal is low Ni rather than typical Fe-Ni, so it is more suited to build up welding of cast iron which requires hardness and also enables surface treatment for materials such as hard Cr plating to be easily performed.
  · Welded metal has excellent crack resistance and mechanical properties.
  
  

  Select to compare

  Configure now
  Starting from∗ ：	555.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308

  hishiko

  [Features]
  · This product enables outstanding weld workability by providing 19% Cr - 9% Ni austenitic structure weld metal that contains the appropriate amount of ferrite, a stable arc, minimal sputter and excellent slag removal.
  · It has low susceptibility to cracking and enables a weld metal with excellent mechanical properties to be obtained.
  · Because HS-308L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	100.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308L

  hishiko

  [Features]
  · This product enables outstanding weld workability by providing 19% Cr - 9% Ni austenitic structure weld metal that contains the appropriate amount of ferrite, a stable arc, minimal sputter and excellent slag removal.
  · It has low susceptibility to cracking and enables a weld metal with excellent mechanical properties to be obtained.
  · Because HS-308L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	92.47 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309

  hishiko

  [Features]
  · This product provides weld metal that has outstanding mechanical properties, with a 25% Cr - 12% Ni austenitic structure that contains the appropriate amount of ferrite and low cracking susceptibility. Provides excellent welding workability thanks to its stable arc, as well as reduced spatter production and slug removability, etc.
  · Contains a large amount of chromium and nickel, which gives it excellent heat and corrosion resistance properties, enabling it to demonstrate stable structure even when diluted with different metal matrix composites such as carbon steel, etc.
  · Because HS-309L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	96.32 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309L

  hishiko

  [Features]
  · This product provides weld metal that has outstanding mechanical properties, with a 25% Cr - 12% Ni austenitic structure that contains the appropriate amount of ferrite and low cracking susceptibility. Provides excellent welding workability thanks to its stable arc, as well as reduced spatter production and slug removability, etc.
  · Contains a large amount of chromium and nickel, which gives it excellent heat and corrosion resistance properties, enabling it to demonstrate stable structure even when diluted with different metal matrix composites such as carbon steel, etc.
  · Because HS-309L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	104.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308T

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 19%Cr-9%Ni. Most generally used for stainless steel structures.
  · Features excellent crack resistance, heat and corrosion resistance, and mechanical characteristics. Because HS-308LT has low carbon content, it provides good grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	95.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308LT

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 19%Cr-9%Ni. Most generally used for stainless steel structures.
  · Features excellent crack resistance, heat and corrosion resistance, and mechanical characteristics. Because HS-308LT has low carbon content, it provides good grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	110.27 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309T

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 24%Cr-13%Ni.
  · Contains a high volume of Cr and Ni, so it is suitable for welding dissimilar materials with carbon steel / low-alloy steel and stainless steel, etc.
  · Because HS-309LT has low carbon content, it is also suitable for underlaying during build-up welding of low carbon stainless steel.
  

  Select to compare

  Configure now
  Starting from∗ ：	122.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309LT

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 24%Cr-13%Ni.
  · Contains a high volume of Cr and Ni, so it is suitable for welding dissimilar materials with carbon steel / low-alloy steel and stainless steel, etc.
  · Because HS-309LT has low carbon content, it is also suitable for underlaying during build-up welding of low carbon stainless steel.
  

  Select to compare

  Configure now
  Starting from∗ ：	134.32 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-30CR

  hishiko

  [Features]
  · Since high Cr cast iron based welding bar generates high hardness Cr carbide, it is suitable for erosion wear resistance.
  · Aside from wear resistance, it is also excellent in heat resistance and corrosion resistance.
  · An easy arc start for excellent welding workability.
  

  Select to compare

  Configure now
  Starting from∗ ：	220.87 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-25CR-3

  hishiko

  [Features]
  · High Cr cast iron based welding bar generates Cr carbide and also Nb, Mo, W, V carbides, to show an extremely high hardness and superior wear resistance in regards to erosion and scratch wear.
  · There are almost no drops in hardness, even in temperatures as high as 600°C. It also boasts excellent corrosion resistance, making it suitable for wear-resistance applications in high temperatures and in corrosive environments.
  

  Select to compare

  Configure now
  Starting from∗ ：	661.37 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod (for Low Carbon 18Cr-8Ni Stainless Steel)

  NIKKO YOZAI MFG

  [Applications]
  Additional wire when welding EN 1.4301 Equiv. (sintered), EN 1.4301 Equiv. (sintered)L, EN 1.4319 Equiv., EN 1.6900 Equiv., etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	170.88 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel TIG Rod TG-309L

  TASETO

  Welding material used for the same applications as TG309, such as welding dissimilar materials with carbon steel, low-alloy steel and stainless steel. Low carbon content, also suitable for underlaying in build-up welding of low carbon stainless steel.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	180.57 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Stainless Steel TIG Rod TG-309Mo

  TASETO

  Stainless steel welding material composed of 25Cr-12Ni-2Mo. Superior resistance to cracking through the addition of Mo. Used for build-up molding when performing 316 stainless steel overlaying welding and dissimilar welding of carbon steel/low-alloy steel and stainless steel.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	334.84 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Aluminum TIG Welding Rod A5356【10 Pieces Per Package】

  NIKKEI SANGYO

  TIG welding rod for aluminum widely used in vessels, vehicles, buildings, and conductors.
  

  Select to compare

  Configure now
  Starting from∗ ：	119.88 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Aluminum TIG Welding Rod A1100【10 Pieces Per Package】

  NIKKEI SANGYO

  TIG welding rod for aluminum widely used in vessels, vehicles, buildings, and conductors.
  

  Select to compare

  Configure now
  Starting from∗ ：	109.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Aluminum TIG Welding Rod A4043

  NIKKEI SANGYO

  TIG welding rod for aluminum widely used in vessels, vehicles, buildings, and conductors.
  

  Select to compare

  Configure now
  Starting from∗ ：	114.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...