ASAHI SEIKO Other Shapes（Unit, Type：Bearing Unit）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape
ASAHI SEIKO
[Features]
· Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.- Volume Discount
Starting from∗ ： 10.36 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type
ASAHI SEIKO
Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.Starting from∗ ： 138.86 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Hanger Shaped Unit with Set Screws and Cylindrical Hole Shape, UCECH
ASAHI SEIKO
[Features]
· The bearing box is fitted with screw holes for pipes, and designed to hang down from steel pipes mounted to conveyors. For this reason, it is appropriate for use as a bearing for screw conveyor hangers.Starting from∗ ： 22.66 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Take-Up-Type Unit, Cylindrical-Bore Type With Set Screws, UCT Type
ASAHI SEIKO
Can be used for belt and chain adjustments in areas where free movement of the shaft center is required.Starting from∗ ： 23.79 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type
ASAHI SEIKO
Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.Starting from∗ ： 10.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series
ASAHI SEIKO
[Features]
· The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.Starting from∗ ： 57.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cartridge-Type Unit, Cylindrical-Bore Type With Set Screws, UCC Type
ASAHI SEIKO
Combines bearings with a cylindrical bearing box made of cast iron with the outer diameter surface given a grinding finish. The entire unit can be used in the same way as a general bearing, and it is suitable for a transmission shaft that expands and contracts.Starting from∗ ： 53.02 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC
ASAHI SEIKO
[Features]
· Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.Starting from∗ ： 57.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape
ASAHI SEIKO
The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.Starting from∗ ： 64.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Unit, Type |
| Bearing Unit, Type |
| Shaft Bore Dia. d(mm) |
| Unit Body Material |
| Bearing Inner Dia. Shape |
| Pillow Type, Category |
| Rolling Element Material |
| Surface Treatment |
|
|
|
|
|
|
|
|
| |
| Brand | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO |
| Product Series | Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape | Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type | Hanger Shaped Unit with Set Screws and Cylindrical Hole Shape, UCECH | Take-Up-Type Unit, Cylindrical-Bore Type With Set Screws, UCT Type | Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type | Cartridge-Type Unit, Cylindrical-Bore Type With Set Screws, UCC Type | Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC | ||
| Starting from∗ | 10.36 € *Unit price with basic configuration Volume Discount | 138.86 € *Unit price with basic configuration | 22.66 € *Unit price with basic configuration | 23.79 € *Unit price with basic configuration | 10.46 € *Unit price with basic configuration | 57.25 € *Unit price with basic configuration | 53.02 € *Unit price with basic configuration | 57.11 € *Unit price with basic configuration | 64.83 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | 10 Days | 10 Days | Same day | 5 Days | 5 Days | 9 Days | 5 Days | 5 Days |
| Unit, Type | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit |
| Bearing Unit, Type | Others | Take-Up Type | Others | Take-Up Type | Others | Diamond-Shaped Flange Type | Others | Others | Pillow Type |
| Shaft Bore Dia. d(mm) | 15 ～ 70 | 20 ～ 65 | 12 ～ 50 | 12 ～ 140 | 20 | 10 ～ 25 | 50 | 20 | 12 ～ 25 |
| Unit Body Material | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | - | Cast Iron | Stainless Steel | - |
| Bearing Inner Dia. Shape | Cylindrical Hole, Set Screw | Taper Hole, Adapter | Cylindrical Hole, Set Screw | Cylindrical Hole, Set Screw | Cylindrical Hole, Set Screw | Cylindrical Hole, Eccentric Collar | Cylindrical Hole, Set Screw | Cylindrical Hole, Set Screw | Cylindrical Hole, Eccentric Collar |
| Pillow Type, Category | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Rolling Element Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | Stainless Steel | Stainless Steel | - |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Unit, Type
-
Bearing Unit -
Framed Bearing Unit -
Others
-
-
Bearing Unit, Type
-
Pillow Type -
Round Flange Type -
Diamond-Shaped Flange Type -
Take-Up Type -
Deformed Diamond-Shaped Flange Type -
Others
-
-
Shaft Bore Dia. d(mm)
-
Unit Body Material
- Cast Iron
- Stainless Steel
- Steel Plate
- Structural Steel
- Steel
-
Bearing Inner Dia. Shape
-
Pillow Type, Category
-
Rolling Element Material
-
Surface Treatment
Narrow search by specifying Brand
-
- MISUMI (2)
- NIPPON PILLOW BLOCK (11)
- ASAHI SEIKO (9)
- NTN (4)
- SKF (0)
- KMT BEARINGS (0)
- SANWA CONVEYOR (0)
- INA (0)
- FAG (0)
- SNR (0)
- ZEN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Other Shapes
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.