AXELL CORPORATION Ultra-Hard Bars（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Ultra-Hard Rotary Bar Type A C Series End Cut (E)
AXELL CORPORATION
[Features]
· Can place a cut blade on the end surface of an A type rotary bar to cut the bottom surface.- Volume Discount
Starting from∗ ： 48.07 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type A C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.Starting from∗ ： 36.12 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type C C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.- Volume Discount
Starting from∗ ： 35.59 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type C C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.- Volume Discount
Starting from∗ ： 40.65 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type D C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.- Volume Discount
Starting from∗ ： 45.75 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type D C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.Starting from∗ ： 46.92 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type E C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.- Volume Discount
Starting from∗ ： 45.05 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type E C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.Starting from∗ ： 55.04 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type H C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.- Volume Discount
Starting from∗ ： 45.33 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type H C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.Starting from∗ ： 54.79 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type K C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.- Volume Discount
Starting from∗ ： 53.63 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type K C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.Starting from∗ ： 54.79 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type L C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.- Volume Discount
Starting from∗ ： 56.46 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type L C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.Starting from∗ ： 58.75 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type R C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.- Volume Discount
Starting from∗ ： 46.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type S C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.Starting from∗ ： 57.36 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type U C Series Master Cut
AXELL CORPORATION
[Features]
· Most commonly used blade shape with good cutting ability and favorable finishing surface.
· Chips are nearly granular and are safe.Starting from∗ ： 53.63 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Ultra-Hard Rotary Bar Type U C Series Spiral Cut (S)
AXELL CORPORATION
[Features]
· This provides a smoother finishing surface compared to Master Cut, with less clogging than Master Cut.Starting from∗ ： 54.79 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) A
AXELL CORPORATION
Aluminum Cut: Special cutting edge shape only for light metals and non-ferrous metals (aluminum, magnesium, brass, etc.).
The chip gullet is wide and the tooth width is thick, making it ideal for cutting plastics.- Volume Discount
Starting from∗ ： 75.29 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) C
AXELL CORPORATION
Aluminum Cut: Special cutting edge shape only for light metals and non-ferrous metals (aluminum, magnesium, brass, etc.).
The chip gullet is wide and the tooth width is thick, making it ideal for cutting plastics.- Volume Discount
Starting from∗ ： 75.29 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) D
AXELL CORPORATION
Aluminum Cut: Special cutting edge shape only for light metals and non-ferrous metals (aluminum, magnesium, brass, etc.).
The chip gullet is wide and the tooth width is thick, making it ideal for cutting plastics.- Volume Discount
Starting from∗ ： 62.96 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) E
AXELL CORPORATION
Aluminium grinding: special cutting edge shape only for light and non-ferrous metals (aluminium, magnesium, brass, etc.).
The chip breaker is wide and the tooth width is thick, making it ideal for machining plastics.Starting from∗ ： 88.76 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) H
AXELL CORPORATION
Aluminum Cut: Special cutting edge shape only for light metals and non-ferrous metals (aluminum, magnesium, brass, etc.).
The chip gullet is wide and the tooth width is thick, making it ideal for cutting plastics.Starting from∗ ： 81.54 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) U
AXELL CORPORATION
Aluminum Cut: Special cutting edge shape only for light metals and non-ferrous metals (aluminum, magnesium, brass, etc.).
The chip gullet is wide and the tooth width is thick, making it ideal for cutting plastics.Starting from∗ ： 97.81 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Blade tip shape |
| Shape |
| Shower Material |
| blade diameter(mm) |
| Blade Length(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION | AXELL CORPORATION |
| Product Series | Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) A | Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) C | Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) D | Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) E | Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) H | Carbide Rotary Bar A/C Series for Aluminum Cutting (Aluminum Cut) U | ||||||||||||||||||
| Starting from∗ | 48.07 € *Unit price with basic configuration Volume Discount | 36.12 € *Unit price with basic configuration | 35.59 € *Unit price with basic configuration Volume Discount | 40.65 € *Unit price with basic configuration Volume Discount | 45.75 € *Unit price with basic configuration Volume Discount | 46.92 € *Unit price with basic configuration | 45.05 € *Unit price with basic configuration Volume Discount | 55.04 € *Unit price with basic configuration | 45.33 € *Unit price with basic configuration Volume Discount | 54.79 € *Unit price with basic configuration | 53.63 € *Unit price with basic configuration Volume Discount | 54.79 € *Unit price with basic configuration | 56.46 € *Unit price with basic configuration Volume Discount | 58.75 € *Unit price with basic configuration | 46.92 € *Unit price with basic configuration Volume Discount | 57.36 € *Unit price with basic configuration | 53.63 € *Unit price with basic configuration | 54.79 € *Unit price with basic configuration | 75.29 € *Unit price with basic configuration Volume Discount | 75.29 € *Unit price with basic configuration Volume Discount | 62.96 € *Unit price with basic configuration Volume Discount | 88.76 € *Unit price with basic configuration | 81.54 € *Unit price with basic configuration | 97.81 € *Unit price with basic configuration |
| Min. Shipping Days ： | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 11 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 6 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days |
| Product Type | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm | Shank Diameter 6 mm |
| Blade tip shape | Cross End Cut | Spiral cut | Cross Cut | Spiral cut | Cross Cut | Spiral cut | Cross Cut | Spiral cut | Cross Cut | Spiral cut | Cross Cut | Spiral cut | Cross Cut | Spiral cut | Spiral cut | Cross Cut | Cross Cut | Spiral cut | Aluminum Cut | Aluminum Cut | Aluminum Cut | Aluminum Cut | Aluminum Cut | Aluminum Cut |
| Shape | Cylinder type | Cylinder type | Round tip type cylinder | Round tip type cylinder | Ball Type | Ball Type | Oval | Oval | Rounded wooden tip | Rounded wooden tip | Tree-shape | Tree-shape | Cone Cutoff Tip Type | Cone Cutoff Tip Type | 90° Cone Type | Reverse Taper Type | Cone Rounded Tip Type | Cone Rounded Tip Type | Cylinder type | Round tip type cylinder | Ball Type | Oval | Rounded wooden tip | Cone Rounded Tip Type |
| Shower Material | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | - | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | All Carbide | - | - | - | - | - | - |
| blade diameter(mm) | φ6.0 ～ φ12.7 | φ6.0 ～ φ12.7 | φ6.0 ～ φ 15.9 | φ6.0 ～ φ12.7 | φ6.0 ～ φ 15.9 | φ6.0 ～ φ12.7 | φ9.5 ～ φ 15.9 | φ6.0 ～ φ12.7 | φ6.0 ～ φ 15.9 | φ6.0 ～ φ12.7 | φ6.0 ～ φ12.7 | φ6.0 ～ φ12.7 | φ6.0 ～ φ 15.9 | φ6.0 ～ φ12.7 | φ6.0 ～ φ12.7 | φ6.0 ～ φ12.7 | φ6.0 ～ φ 15.9 | φ6.0 ～ φ12.7 | φ9.5 ～ φ19.1 | φ9.5 ～ φ19.1 | φ9.5 ～ φ 15.9 | φ9.5 ～ φ12.7 | φ9.5 ～ φ 15.9 | φ9.5 ～ φ 15.9 |
| Blade Length(mm) | 16 ～ 25 | 16 ～ 25 | 16 ～ 25 | 16 ～ 25 | - | - | 16 ～ 25 | 10 ～ 22 | 16 ～ 25 | 16 ～ 25 | 16 ～ 25 | 16 ～ 25 | 16 ～ 25 | 16 ～ 22 | - | 8 ～ 13 | 16 ～ 36 | 16 ～ 33 | 19 ～ 25 | 19 ～ 25 | - | 16 ～ 22 | 19 ～ 25 | 27 ～ 33 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
- Shank Diameter 3 mm
- Shank Diameter 6 mm
- Carbide Bar set
-
Blade tip shape
-
Shape
- Cylinder type
- Round tip type cylinder
- Rounded wooden tip
- Tree-shape
- Cone Cutoff Tip Type
- Cone Rounded Tip Type
- Oval
- Ball Type
- 90° Cone Type
- 60° Cone Type
- Tapered oval tip
- Oval
- Reverse Taper Type
- Cylindrical end blade type
- Point Type
-
Shower Material
- All Carbide
- Brazed
-
blade diameter(mm)
-
Blade Length(mm)
Narrow search by specifying Brand
-
- AXELL CORPORATION (69)
- NAKANISHI (32)
- ONAROI (23)
- NEWREGISTON (14)
- MINITOR (12)
- SUPER TOOL (12)
- NIHON SEIMITSU KIKAI KOSAKU (6)
- DREMEL (4)
- SUMFLEX (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Ultra-Hard Bars
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.