BLICKLE Equipment Castors（Wheel Characteristics：Heat Resistance Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Pressed Steel Swivel Castor, LIR-VEHI Series
BLICKLE
Pressed Steel Swivel Castor, with Bolt Hole, Heat-Resistant, Blickle Templine® Wheel Basic, with Solid Rubber Tyres, with Pressed Steel Rim, Heat-Resistant
Bracket: LIR series- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
Wheel: VEHI series
- tyre: highly heat-resistant solid rubber, hardness 80 Shore A, colour black
- rim: pressed steel, zinc-plated, blue-passivated, Cr6-free
- chemical resistance to many aggressive substances, except oils
- operating temperature: -25 °C to +200 °C
- majority of tyre flattening recovers when in motion under load
Starting from∗ ： 51.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pressed Steel Swivel Castor, LIR-VKHT Series
BLICKLE
Pressed Steel Swivel Castor, with Bolt Hole, Heat-Resistant, Blickle Templine® Wheel Special, with Solid Rubber Tyres, with Synthetic Rim, Heat-Resistant
Bracket: LIR series- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
Wheel: VKHT series
- tyre: highly heat-resistant solid rubber, hardness 85 Shore A, colour black
- rim: highly heat-resistant nylon 6, impact resistant, colour black
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -30 °C to +260 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +260 °C
- tyre flattening recovers when in motion under load
Starting from∗ ： 89.45 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Pressed Steel Swivel Castor, LI-VEHI Series
BLICKLE
Pressed Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Blickle Templine® Wheel Basic, with Solid Rubber Tyres, with Pressed Steel Rim, Heat-Resistant
Bracket: LI series- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
Wheel: VEHI series
- tyre: highly heat-resistant solid rubber, hardness 80 Shore A, colour black
- rim: pressed steel, zinc-plated, blue-passivated, Cr6-free
- chemical resistance to many aggressive substances, except oils
- operating temperature: -25 °C to +200 °C
- majority of tyre flattening recovers when in motion under load
Starting from∗ ： 40.93 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pressed Steel Swivel Castor, LI-VKHT Series
BLICKLE
Pressed Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Blickle Templine® Wheel Special, with Solid Rubber Tyres, with Synthetic Rim, Heat-Resistant
Bracket: LI series- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
Wheel: VKHT series
- tyre: highly heat-resistant solid rubber, hardness 85 Shore A, colour black
- rim: highly heat-resistant nylon 6, impact resistant, colour black
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -30 °C to +260 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +260 °C
- tyre flattening recovers when in motion under load
Starting from∗ ： 88.17 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LIX-PHN Series
BLICKLE
Stainless Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Blickle Templine® Classic Thermoset Wheel, Heat-Resistant
Bracket: LIX series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
- all parts including axle material are corrosion-resistant
Wheel: PHN series
- phenolic resin, hardness 90 Shore D, colour black
- high chemical resistance to many aggressive substances
- operating temperature: -35 °C to +260 °C
- wheels are only conditionally suitable for uneven floors and crossing thresholds
Starting from∗ ： 89.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LIX-POH Series
BLICKLE
Stainless Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant Nylon Wheel
Bracket: LIX series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
- all parts including axle material are corrosion-resistant
Wheel: POH series
- highly heat-resistant nylon, impact resistant, hardness 85 Shore D, colour natural
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +170 °C
- oven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °C
- Load capacity may be reduced in temperatures over +70 °C
- suitable for autoclaves
Starting from∗ ： 88.84 € Min. Shipping Days ： 23 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LIX-POHI Series
BLICKLE
Stainless Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Blickle Templine® Performance Thermoplastic Wheel, Heat-Resistant, LIX-POHI Series
Bracket: LIX series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
- all parts including axle material are corrosion-resistant
Wheel: POHI series
- highly heat-resistant thermoplastic, impact resistant, hardness 85 Shore D, colour dark grey
- operating temperature: -25 °C to +250 °C
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +250 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
- Load capacity may be reduced in temperatures over +70 °C
- suitable for autoclaves
Starting from∗ ： 93.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LIX-POSI Series
BLICKLE
Stainless Steel Swivel Castor, with Top Plate Fitting, Heat-Resistant, Blickle Templine® Comfort Wheel, with Silicone Rubber Tread, with Synthetic Wheel Centre, Heat-Resistant
Bracket: LIX series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- all parts including axle material are corrosion-resistant
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- grease-free as standard (“-OF”)
Wheel: POSI series
- tread: highly heat-resistant silicone rubber, hardness 75 Shore A, colour black
- wheel centre: highly heat-resistant thermoplastic, impact resistant, colour dark grey
- very high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +250 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
- suitable for autoclaves
Starting from∗ ： 126.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LIXR-PHN Series
BLICKLE
Stainless Steel Swivel Castor, with Bolt Hole Fitting, Heat-Resistant, Blickle Templine® Classic Thermoset Wheel, Heat-Resistant
Bracket: LIXR series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
- all parts including axle material are corrosion-resistant
Wheel: PHN series
- phenolic resin, hardness 90 Shore D, colour black
- high chemical resistance to many aggressive substances
- operating temperature: -35 °C to +260 °C
- wheels are only conditionally suitable for uneven floors and crossing thresholds
Starting from∗ ： 88.03 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LIXR-POH Series
BLICKLE
Stainless Steel Swivel Castor, with Bolt Hole Fitting, Heat-Resistant, Nylon Wheel
Bracket: LIXR series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
- all parts including axle material are corrosion-resistant
Wheel: POH series
- highly heat-resistant nylon, impact resistant, hardness 85 Shore D, colour natural
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +170 °C
- oven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °C
- Load capacity may be reduced in temperatures over +70 °C
- suitable for autoclaves
Starting from∗ ： 75.49 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LIXR-POHI Series
BLICKLE
Stainless Steel Swivel Castor, with Bolt Hole Fitting, Heat-Resistant Blickle Templine® Performance Thermoplastic Wheel, Heat-Resistant
Bracket: LIXR series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- double ball bearing in the swivel head
- strong central kingpin
- smooth rolling characteristic and low wear, increased service life
- swivel head play is set specifically for high-temperature applications
- highly heat-resistant grease
- all parts including axle material are corrosion-resistant
Wheel: POHI series
- highly heat-resistant thermoplastic, impact resistant, hardness 85 Shore D, colour dark grey
- operating temperature: -25 °C to +250 °C
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +250 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
- Load capacity may be reduced in temperatures over +70 °C
- suitable for autoclaves
Starting from∗ ： 83.75 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Stainless Steel Light Duty Swivel Castor, LPXA-TPA Series
BLICKLE
Stainless Steel Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre, LPXA-TPA Series
Bracket: LPXA series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- all parts including axle material are corrosion-resistant
- double ball bearing in the swivel head
- strong central kingpin
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: TPA series
- tread: high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A, colour grey, non-marking, oil containing
- wheel centre: high-quality polypropylene, impact resistant, colour silver grey
- very high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
- tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH
Starting from∗ ： 56.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel Light Duty Swivel Castor, LPXA-VPA Series
BLICKLE
Stainless Steel Light Duty Swivel Castor, with Top Plate Fitting, Wheel, with Solid Rubber Tyres, with Synthetic Rim, LPXA-VPA Series
Bracket: LPXA series- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- all parts including axle material are corrosion-resistant
- double ball bearing in the swivel head
- strong central kingpin
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: VPA series
- tyre: high-quality solid rubber, hardness 80 Shore A, colour grey, non-marking, non-staining
- rim: high-quality nylon 6 or polypropylene in the electrically conductive version "-EL", impact resistant, colour black
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
Starting from∗ ： 53.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Stainless Steel Swivel Castor, LPX-PGV Series
BLICKLE
Stainless Steel Swivel Castor, with Top Plate Fitting, Wheel, with Elastic Solid Rubber Tyres, with Aluminium Wheel Centre, Non-Marking, Grey, with Steel Thread Guard
Bracket: LPX series- high-quality chromium-nickel steel (1.4301 / AISI304), corrosion-resistant, vibration-ground finished
- all parts including axle material are corrosion-resistant
- four-point ball bearing for optimal absorption of vertical and horizontal forces
- hardened precision fork head made from corrosion-resistant steel (1.4034 / AISI420)
- excellent swivel characteristics, particularly resistant to impact and shocks
- grease nipple
Wheel: PGV series
- tread: high-quality elastic solid rubber in smooth rolling quality, hardness 80 Shore A, colour grey, non-marking
- wheel centre: die-cast aluminium, colour silver grey
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -25 °C to +134 °C, reduced load capacity over +35 °C
- suitable for autoclaves
Starting from∗ ： 291.63 € Min. Shipping Days ： 23 Days *Unit price with basic configuration
-
Hospital Bed Castor, LPZ-ALTPU Series
BLICKLE
Hospital Bed Castor, with Stem Fitting and Integrated Switching Cam, with Central and Directional Lock, Wheel, with Thermoplastic Polyurethane Tread, with Aluminium Wheel Centre, with Steel Thread Guard, Electrically Conductive, Non-Mar King
Bracket: LPZ series- high-quality chromium-nickel steel (1.4301 / AISI304), corrosion-resistant, vibration-ground finished
- four-point ball bearing for optimal absorption of vertical and horizontal forces
- hardened precision fork head made from corrosion-resistant steel (1.4034 / AISI420)
- excellent swivel characteristics, particularly resistant to impact and shocks
- stem fitting with hexagonal switching cams
- grease nipple
Wheel: ALTPU series
- high-quality thermoplastic polyurethane (TPU), hardness 92 Shore A, colour dark grey, non-marking, non-staining
- wheel centre: die-cast aluminium
- operating temperature: -20 °C to +134 °C, reduced load capacity over +35 °C, abrasion-resistant
- suitable for autoclaves
- electrical conductivity (ohmic resistance) ≤ 104 Ω
Starting from∗ ： 464.81 € Min. Shipping Days ： 23 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Caster Type |
| Type |
| Mounting Height H(mm) |
| Load Range(daN) |
| Stopper |
| Wheel Material |
| Wheel Characteristics |
| Fitting Material |
| Mounting Hole Type |
| Mounting Hole Pitch, Long Length Direction L1(mm) |
| Mounting Hole Pitch, Short Length Direction W1(mm) |
| Thread Dia. |
| Wheel Dia. D(mm) |
| Mounting Hole Pitch Circular Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE |
| Product Series | |||||||||||||||
| Starting from∗ | 51.75 € *Unit price with basic configuration | 89.45 € *Unit price with basic configuration | 40.93 € *Unit price with basic configuration | 88.17 € *Unit price with basic configuration | 89.69 € *Unit price with basic configuration | 88.84 € *Unit price with basic configuration | 93.15 € *Unit price with basic configuration | 126.53 € *Unit price with basic configuration | 88.03 € *Unit price with basic configuration | 75.49 € *Unit price with basic configuration | 83.75 € *Unit price with basic configuration | 56.80 € *Unit price with basic configuration | 53.20 € *Unit price with basic configuration | 291.63 € *Unit price with basic configuration | 464.81 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | 7 Days | 5 Days | 7 Days | 5 Days | 23 Days | 5 Days | 5 Days | 7 Days | 7 Days | 7 Days | 5 Days | 5 Days | 23 Days | 23 Days |
| Caster Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Resin / Through Hole Type / Rotation Type | Plate Type Swivel / Screw-In Type / Through Hole Type / Rotation Type |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Height H(mm) | 125 ～ 235 | 102 ～ 125 | 125 ～ 190 | 190 ～ 235 | 102 ～ 235 | 102 ～ 235 | 102 ～ 150 | 125 ～ 150 | 102 ～ 150 | 102 ～ 150 | 125 ～ 150 | 146 ～ 195 | 195 ～ 236 | 50 ～ 236 | 72 |
| Load Range(daN) | 35.01 to 80.00 / 80.01 to 140.00 | 80.01 to 140.00 | 35.01 to 80.00 / 80.01 to 140.00 / 140.01 to 220.00 | 80.01 to 140.00 | 80.01 to 140.00 / 140.01 to 220.00 / 220.01 to 320.00 / 320.01 to 485.00 | 140.01 to 220.00 / 320.01 to 485.00 | 140.01 to 220.00 / 320.01 to 485.00 | 80.01 to 140.00 | 80.01 to 140.00 / 140.01 to 220.00 | 140.01 to 220.00 | 140.01 to 220.00 | Up to 35.00 / 35.01 to 80.00 | 35.01 to 80.00 | 80.01 to 140.00 / 140.01 to 220.00 | 140.01 to 220.00 |
| Stopper | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wheel Material | Steel | Engineering Plastics | Steel | Engineering Plastics | Engineering Plastics | Engineering Plastics | Engineering Plastics | Engineering Plastics | Engineering Plastics | Engineering Plastics | Engineering Plastics | Engineering Plastics | Engineering Plastics | Aluminum | Aluminum |
| Wheel Characteristics | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance | Heat Resistance |
| Fitting Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Hole Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Hole Pitch, Long Length Direction L1(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Hole Pitch, Short Length Direction W1(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Dia. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wheel Dia. D(mm) | 100 ～ 200 | 80 ～ 100 | 100 ～ 150 | 150 ～ 200 | 80 ～ 200 | 80 ～ 200 | 80 ～ 125 | 100 ～ 125 | 80 ～ 125 | 80 ～ 125 | 100 ～ 125 | 105 ～ 150 | 150 ～ 186 | 35 ～ 186 | 50 |
| Mounting Hole Pitch Circular Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Caster Type
-
Type
- Caster
-
Mounting Height H(mm)
- 12.5
- 21
- 23.5
- 30
- 32
- 34
- 35
- 36
- 39
- 40
- 42
- 42.5
- 43
- 43.5
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48
- 49
- 50
- 50.5
- 51
- 51.5
- 52
- 53
- 54
- 54.5
- 55
- 56
- 57
- 57.5
- 58
- 58.5
- 59
- 59.5
- 60
- 61
- 62
- 63
- 63.5
- 64
- 65
- 65.5
- 66
- 67
- 68
- 68.5
- 69
- 70
- 70.5
- 71
- 72
- 72.5
- 73
- 74
- 74.5
- 75
- 76
- 77
- 77.5
- 78
- 79
- 79~72
- 79.5
- 80
- 81
- 82
- 83
- 84
- 84.5
- 85
- 86
- 87
- 87~75
- 87.5
- 88
- 89
- 89~77
- 90
- 91
- 92
- 92.5
- 93
- 94
- 95
- 96
- 96.5
- 97
- 98
- 99
- 100
- 101
- 102
- 102~95
- 102.5
- 103
- 104
- 104~99
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 111.5
- 112
- 112~100
- 112.5
- 113
- 114
- 114~102
- 115
- 117
- 117.5
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 124.5
- 125
- 126
- 126.5
- 127
- 127~120
- 128
- 129
- 129~122
- 130
- 130.5
- 132
- 133
- 133.5
- 134
- 135
- 136
- 137
- 137~125
- 138
- 139
- 139~127
- 140
- 142
- 143
- 143~135
- 144
- 145
- 146
- 147
- 148
- 150
- 151
- 152
- 152.5
- 153
- 153~145
- 153.5
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 162.5
- 163
- 164
- 165
- 165(142)
- 166
- 167
- 168
- 168.5
- 170
- 171
- 171~148
- 171~154
- 171~158
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 178.5
- 179
- 180
- 181
- 182
- 183
- 184
- 184.5
- 185
- 185 to 205
- 185.5
- 186(161)
- 186.6
- 187
- 188
- 189
- 190
- 191
- 192
- 193~167
- 193~173
- 193~177
- 193 to 183
- 194
- 195
- 196
- 196.6
- 197
- 198
- 199
- 199.5
- 200
- 202
- 203
- 205
- 209
- 210
- 210~198
- 212
- 213
- 214
- 215
- 217
- 217.5~337.5
- 218
- 219
- 220
- 223
- 225
- 230
- 230 to 250
- 233
- 235
- 236
- 237
- 239
- 240
- 241
- 242
- 243
- 245
- 246
- 246 to 236
- 247.3
- 250
- 250~235
- 251
- 252
- 255
- 256
- 257
- 260
- 260~250
- 262
- 264
- 265
- 267
- 270
- 272~392
- 275
- 275~255
- 275~260
- 280
- 285
- 287
- 289
- 290
- 292
- 293
- 295
- 300
- 302
- 304
- 305
- 306
- 307
- 308
- 311
- 312
- 314
- 315
- 317
- 318
- 320
- 325
- 330
- 350
- 355
- 358
- 360
- 365
- 367
- 370
- 371
- 374
- 375
- 378.5
- 380
- 390
- 394
- 395
- 420
- 430
- 450
- 458
- 470
- 473
- 475
- 478
- 480
- 495
- 500
- 518
- 520
- 530
- 580
- 600
- 618
- 623
- 630
- 675
- 710
- 730
-
Load Range(daN)
- Up to 35.00
- 35.01 to 80.00
- 80.01 to 140.00
- 140.01 to 220.00
- 220.01 to 320.00
- 320.01 to 485.00
- 485.01 to 750.00
- 750.01 or More
-
Stopper
- Not Provided
- With Rotation Stopper
- With Swivel Stopper
- With Double Stopper (Rotation + Swivel)
-
Wheel Material
- Synthetic Rubber
- Nylon
- Urethane
- Polyurethane
- Phenol
- Engineering Plastics
- Steel
- Others
- Stainless Steel
- Rubber
- Elastomer
- Aluminum
-
Wheel Characteristics
-
Fitting Material
- Steel
- Stainless Steel
- Others
- Aluminum
- Steel
- Zinc
-
Mounting Hole Type
-
Mounting Hole Pitch, Long Length Direction L1(mm)
-
Mounting Hole Pitch, Short Length Direction W1(mm)
-
Thread Dia.
-
Wheel Dia. D(mm)
-
Mounting Hole Pitch Circular Diameter(mm)
Narrow search by specifying Brand
-
- MISUMI (1)
- BLICKLE (60)
- GIFU SANKEN KOGYO (44)
- TAKIGEN(HAMMER CASTER) (22)
- UCHIMURA (22)
- TAKIGEN (20)
- TOUHOKU SHARYO (8)
- SAMSONG (4)
- TOSEI SHARYO (4)
- YUEI CASTER (4)
- SISIKU ADDKREIS (3)
- OHINDUSTRIAL (2)
- TRUSCO NAKAYAMA (2)
- YODONO (1)
- IMAO CORPORATION (0)
- PREVOST (0)
- HAION (0)
- MAKITECH (0)
- ORII AND MEC (0)
- SUNCO (0)
- EASTERN SEIKO (0)
- HILOGIK (0)
- SUEHIRO(KATSUYAMA KIKAI) (0)
- NABEYA (0)
- KURASHIKI KAKO (0)
- HIKARI (0)
- KYOMACHI (0)
- TOKAI CASTER (0)
- INOAC (0)
- SONRIN (0)
- NANSIN (0)
- ELESA (0)
- SPACIO (0)
- NORELEM (0)
- KIPP (0)
- PARTS SEIKO (0)
- ESCO (0)
- TOSHIN CASTER (0)
- OKAMOTO KOKI (0)
- BS ROLLEN (0)
- TORWEGGE (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Equipment Castors
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.