HALDER Clamping Levers（Type Clamp：Clamp Mechanism）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Recommendation
Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- 3D CAD data available
Starting from∗ ： 21.51 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Recommendation
Eccentric Quick Clamp Lever Nut Included
HALDER
[Features]
· Enables quick and reliable attaching and detaching of components.
· Adjustable type uses the lock nut to adjust the direction the lever faces.- 3D CAD data available
Starting from∗ ： 8.35 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Eccentric Quick Clamp Lever Screw Included
HALDER
[Features]
· Enables quick and reliable attaching and detaching of components.
· Adjustable type uses the lock nut to adjust the direction the lever faces.- 3D CAD data available
Starting from∗ ： 10.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping Catch
HALDER
[Features]
· There is a spacer and washer under the cam disk so the lever can easily be rotated to the desired position even if the securing bolt is tightened.
· Left rotation type can also be provided through special order.- 3D CAD data available
Starting from∗ ： 53.37 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cam Clamp
HALDER
[Features]
· Clamp lever position can be freely changed based on selection.
· If the thrust washer is removed, this can be used as an infinitely adjustable stopper.
· Left rotation type can also be provided through special order.- 3D CAD data available
Starting from∗ ： 53.94 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Eccentric Lever Shaft Pin Included
HALDER
[Features]
· Operating temperature range: plastic grip type maximum 60°C.- 3D CAD data available
Starting from∗ ： 27.96 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Position Adjustable Clamping Lever Screw Included
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.- 3D CAD data available
Starting from∗ ： 7.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
For Axle Pin Eccentric Lever
HALDER
[Features] Used together with parts such as eccentric lever EH23390.- 3D CAD data available
Starting from∗ ： 3.69 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Cam Clamp Module Shaft Hole Type
HALDER
[Features]
· Clamp effect is the same at any angle; self-locking.- 3D CAD data available
Starting from∗ ： 11.90 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Quick Clamp, Clamp Lever Included
HALDER
[Features]
· This quick clamp tights work to the fixed surface while also supporting the work facing down.
· Low profile design and so is suitable for machining the entire surface of the work.- 3D CAD data available
Starting from∗ ： 168.31 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Swing Clamp Size 25
HALDER
[Features]
· The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
· Swiveling the clamp arm enables simple exchange of work pieces.
· Compact, so clamping is feasible in a narrow space.
· Supports necessary clamp heights using a height adjustment cylinder etc.- 3D CAD data available
Starting from∗ ： 154.75 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Swing Clamp Size 60
HALDER
[Features]
· Clamping feasible through quick tightening using a bolt and eccentric lever.
· Swiveling of the clamp arm enables simple and quick exchange of work pieces.
· Compact, so clamping is feasible in a narrow space.
· Clamping at a high position is simple using the height adjustment cylinder.- 3D CAD data available
Starting from∗ ： 433.14 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ball Lever DIN99
HALDER
[Features] Operating parts. [Material] Steel, black oxide coating/stainless steel 1.4305 (corresponds to EN 1.4305 Equiv.), sandblasted.- 3D CAD data available
Starting from∗ ： 6.04 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever Screw Included, Internal Parts, Stainless Steel
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
· If the lever is released, it returns to meshed status.
· Threaded part can be replaced
· Internal parts are made of stainless steel.
[Applications]
· Clamping lever for adjusting lever position.
· Has a variety of uses including for medical devices and in the chemical industry.- 3D CAD data available
Starting from∗ ： 9.22 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Module For Securing With Screw Hole For Attaching Lever
HALDER
[Features]
· Enables quick securing to a shaft providing a base to attach the lever.- Volume Discount
- 3D CAD data available
Starting from∗ ： 11.28 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Position Adjustable Clamping Lever Nut Included, Internal Parts, Made Of Stainless Steel
HALDER
[Features]
· Clamping lever enabling adjusting the lever position.
· Internal parts are made of stainless steel.
· Has a variety of uses including for medical devices and in the chemical industry.
· When the lever is pulled up the serrations disengage, letting you freely change the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.- 3D CAD data available
Starting from∗ ： 8.57 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamping Lever
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.- 3D CAD data available
Starting from∗ ： 11.76 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Swing Clamp Low Profile Type, Size 44
HALDER
[Features]
· The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
· Swiveling the clamp arm to the right or left enables simple and quick replacement of the work.
· Clamp position is infinitely adjustable through use of the positioning ring EH23310.0350 and the clamp arm can be brought repeatedly to the same position.
· If a positioning ring is used, dimension h2 gets 7 mm larger (spoke s gets smaller by 7 mm).
· Compact, so clamping is feasible in a narrow space.
· Clamping at a high position is simple using the height adjustment cylinder.- 3D CAD data available
Starting from∗ ： 183.62 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included, Made Of Stainless Steel
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- 3D CAD data available
Starting from∗ ： 37.17 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever Nut Included Thrust Bearing Included
HALDER
[Features]
· Clamping lever enabling adjusting the lever position.
· Internal parts are made of stainless steel.
· Has a variety of uses including for medical devices and in the chemical industry.
· When the lever is pulled up the serrations disengage, letting you freely change the lever position.
· If the lever is released, it returns to meshed status.
· The threaded part can be replaced.
· Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
· No scratches formed on the applicable parts as the seat surface does not move.
· A high amount of pretension can be applied to the threaded part so it will not readily loosen.- 3D CAD data available
Starting from∗ ： 19.02 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamp Nut Lever Weld Type
HALDER
[Features] cheaper version of DIN99. [Clamp Type] Clamping mechanism, "working direction" horizontal.- 3D CAD data available
Starting from∗ ： 3.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Clamp Nut Lever Weld, Double Lever
HALDER
[Features] Double lever, can be operated with both hands. [Type of mounting part] Female thread.- 3D CAD data available
Starting from∗ ： 5.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Swing Clamp Size 40
HALDER
[Features]
· The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
· Swiveling the clamp arm to the right or left enables simple and quick replacement of the work.
· Clamp position is infinitely adjustable through use of the positioning ring EH23310.0350 and the clamp arm can be brought repeatedly to the same position.
· If a positioning ring is used, dimension h2 gets 7 mm larger (spoke s gets smaller by 7 mm).
· Compact, so clamping is feasible in a narrow space.
· Clamping at a high position is simple using the height adjustment cylinder.- 3D CAD data available
Starting from∗ ： 239.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
No Hold Down Clamp Lever
HALDER
[Features]
· When the ball type set screw is tightened the work piece is pushed to the side and at the same time held down.
· A large force in the sideways direction is applied through use of appropriate leverage.- 3D CAD data available
Starting from∗ ： 142.33 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
No Hold Down Clamp Lever, Base Included
HALDER
[Features]
· When the ball type set screw is tightened the work piece is pushed to the side and at the same time held down.
· A large force in the sideways direction is applied through use of appropriate leverage.- 3D CAD data available
Starting from∗ ： 226.66 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
For Positioning Ring Swing Clamp Size 40
HALDER
[Features]
· After setting the swing clamp, the positioning ring is set to the main body and secured using a set screw.
· With this ring, the clamp position of the swing clamp can be retained in a prescribed position.
· The positioning ring direction can be mounted 360 degrees in any direction.
· After mounting, the rotation angle of the swing clamp will be set 110 degrees to the right or to the left.
· The clamp arm is pulled in to mount the positioning ring to the swing clamp.- 3D CAD data available
Starting from∗ ： 49.99 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Position Adjustable Clamping Lever
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.- 3D CAD data available
Starting from∗ ： 18.16 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Position Adjustable Clamping Lever Nut Included
HALDER
[Features]
· When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
· When the lever is released the serrations mesh.
· The threaded part can be replaced.- 3D CAD data available
Starting from∗ ： 6.61 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Holding Plates Quick-Release For Down-Hold Clamps
HALDER
[Features]
· Using this mounting plate it is possible to mount downhold clamps, etc. to the T groove at any angle and position.- 3D CAD data available
Starting from∗ ： 79.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Double Side Eccentric Lever Shaft Pin Included
HALDER
[Features]
· Can be clamped in both directions.
· Used in combination with DIN444 eye bolt M12 (EH22980).- 3D CAD data available
Starting from∗ ： 67.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
| Product Series | Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included | Position Adjustable Clamping Lever Screw Included, Internal Parts, Stainless Steel | Position Adjustable Clamping Lever Nut Included, Internal Parts, Made Of Stainless Steel | Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included, Made Of Stainless Steel | Position Adjustable Clamping Lever Nut Included Thrust Bearing Included | |||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 21.51 € *Unit price with basic configuration | 8.35 € *Unit price with basic configuration | 10.10 € *Unit price with basic configuration | 53.37 € *Unit price with basic configuration | 53.94 € *Unit price with basic configuration | 27.96 € *Unit price with basic configuration | 7.07 € *Unit price with basic configuration | 3.69 € *Unit price with basic configuration | 11.90 € *Unit price with basic configuration | 168.31 € *Unit price with basic configuration | 154.75 € *Unit price with basic configuration | 433.14 € *Unit price with basic configuration | 6.04 € *Unit price with basic configuration | 9.22 € *Unit price with basic configuration | 11.28 € *Unit price with basic configuration Volume Discount | 8.57 € *Unit price with basic configuration | 11.76 € *Unit price with basic configuration | 183.62 € *Unit price with basic configuration | 37.17 € *Unit price with basic configuration | 19.02 € *Unit price with basic configuration | 3.11 € *Unit price with basic configuration | 5.06 € *Unit price with basic configuration | 239.08 € *Unit price with basic configuration | 142.33 € *Unit price with basic configuration | 226.66 € *Unit price with basic configuration | 49.99 € *Unit price with basic configuration | 18.16 € *Unit price with basic configuration | 6.61 € *Unit price with basic configuration | 79.62 € *Unit price with basic configuration | 67.45 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | Same day | Same day | Same day | 2 Days | 2 Days | Same day | 2 Days | 2 Days | Same day | Same day | Same day | Same day | Same day | 2 Days | Same day | Same day | 3 Days | Same day | Same day | Same day | Same day | Same day | Same day | 3 Days | 4 Days | Same day | Same day | 4 Days | 3 Days |
| Application | Related Components | Related Components | Related Components | Clamp | Clamp | Related Components | Related Components | Related Components | Clamp | Clamp | Clamp | Clamp | Related Components | Related Components | Related Components | Related Components | Related Components | Clamp | Related Components | Related Components | Related Components | Related Components | Clamp | Clamp | Clamp | Related Components | Related Components | Related Components | Related Components | Related Components |
| Type Clamp | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism |
| Type operation | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operation Direction | Horizontal | - | - | Horizontal | Horizontal | - | Horizontal | Horizontal | Horizontal | Horizontal | - | - | - | Horizontal | - | Horizontal | Horizontal | - | Horizontal | Horizontal | Horizontal | Horizontal | - | - | - | - | - | Horizontal | - | - |
| Shape | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Other | Other | Shape with Knob | L-Shaped / T-Shaped | L-Shaped / T-Shaped | L-Shaped / Other | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | L-Shaped / T-Shaped | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | L-Shaped / T-Shaped | Other | Other | Other | L-Shaped | Shape with Knob | Other | Shape with Knob |
| L-Shaped Clamp Lever Shape | - | - | - | - | Set Screw Type | - | Set Screw Type | - | - | - | Set Screw Type | Set Screw Type | - | - | - | - | Set Screw Type | Set Screw Type | - | - | Set Screw Type | Set Screw Type | Set Screw Type | - | - | Set Screw Type | Set Screw Type | - | - | - |
| Lever Shape with Knob | - | - | - | Single lever | Single lever | - | Single lever | - | - | Single lever | Single lever | Single lever | Single lever | Single lever | - | - | Single lever | Single lever | - | Single lever | Single lever | Double Lever | Single lever | - | - | - | Single lever | Single lever | - | - |
| Mounting Section Type | Male thread | Male thread | Male thread | Male thread | Male thread | Round Hole | Male thread | - | Round Hole | Round Hole | Female Thread | Female Thread | Female Thread / Round Hole | Male thread | Female Thread | Female Thread | Female Thread | Female Thread | Male thread | Female Thread | Female Thread | Female Thread | Female Thread | Round Hole | Round Hole | Female Thread | Male thread / Female Thread | Female Thread | Female Thread | Round Hole |
| Rotating Radius R(mm) | 62 ～ 108 | 63 ～ 82 | 63 ～ 82 | 109 | 109 | 114 ～ 157 | 30 ～ 108 | - | - | - | 74 | 100 | 48 ～ 190 | 30 ～ 108 | - | 30 ～ 108 | - | 100 | 62 ～ 108 | 62 ～ 108 | 60 ～ 152 | 47.5 ～ 118 | 108 | - | - | - | - | 30 ～ 108 | - | - |
| Main Body Material | Zinc Alloy | Zinc Alloy | Zinc Alloy | Steel | Steel | Steel / Zinc Alloy | Zinc Alloy | - | Steel | Steel | Steel | Steel | Steel | Zinc Alloy | Steel | Zinc Alloy | Steel | Steel | Zinc Alloy | Zinc Alloy | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Zinc Alloy | Steel | Steel |
| Main Body Surface Treatment | Other | - | - | Nickel Plating / Black Oxide | Nickel Plating / Black Oxide | - | Other | - | Other | Black Oxide | Black Oxide | Black Oxide | Black Oxide / Other | - | Black Oxide | - | Black Oxide | Black Oxide | Other | - | - | Other | Black Oxide | Black Oxide | Black Oxide | Other | Black Oxide / Other | - | Black Oxide | - |
| Mounting Section Material | Steel | - | - | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Steel | - | - | - | - | - | - | Stainless Steel | - | Stainless Steel | - | - | Stainless Steel | Stainless Steel / Steel | - | - | - | - | - | - | Stainless Steel / Steel | Steel | - | - |
| Mounting Section Surface Treatment | Black Oxide | - | - | Electroless Nickel Plating | Electroless Nickel Plating / Black Oxide | - | Black Oxide | - | - | - | - | - | - | - | - | - | - | - | - | Black Oxide | - | - | - | - | - | - | - | Black Oxide | - | - |
| Knob Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ABS Resin | - | - | - | - | - | - | - | - | - | ABS Resin | - | - | - |
| Surface Treatment of knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Adjustment screw for gap | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Diameter d(mm) and/or Diameter | 6 ～ 12 | 6 ～ 8 | 6 ～ 8 | 10 | 10 | 8 ～ 12 | 4 ～ 16 | 8 ～ 12 | 8 ～ 12 | 8 ～ 12 | 8 | 12 ～ 16 | 6 ～ 24 | 4 ～ 16 | 10 ～ 16 | 3 ～ 16 | 8 ～ 20 | 12 | 6 ～ 12 | 6 ～ 12 | 8 ～ 20 | 8 ～ 20 | 12 | 8 ～ 16 | 8 ～ 16 | 5 | 6 ～ 20 | 3 ～ 16 | 8 ～ 16 | 12 |
| Mounting Section Length L(mm) | 20 ～ 85 | 13 ～ 15 | 20 ～ 60 | - | - | - | 12 ～ 80 | 14 ～ 31 | - | 132 ～ 190 | - | 65 ～ 69 | 50 ～ 200 | 12 ～ 80 | 15.5 ～ 19.5 | - | - | - | 20 ～ 85 | 12.5 ～ 26.5 | 63 ～ 160 | - | - | 52 ～ 86 | 72.5 ～ 126 | 43.5 | 11 ～ 80 | 7 ～ 22 | 100 ～ 140 | - |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Other
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Narrow search by specifying Brand
-
- MISUMI (17)
- HALDER (30)
- KONISHI MFG (26)
- IMAO CORPORATION (16)
- NABEYA BI-TECH (14)
- ESCO (0)
- EUROFLEX (0)
- ELESA (0)
- KIPP (0)
- GANTER (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.