IMAO CORPORATION Clamping Levers（Main Body Material：Steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Ratchet Lever (RL)
IMAO CORPORATION
All SCM made, this ratchet type lever handle appears heavy.
[Features]
· Powerful ratchet lever that works in both forward and reverse directions.
· Demonstrates good strength when working in narrow places- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 169.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Tension Lever (FTF, FT)
IMAO CORPORATION
In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
[Features]
· Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
· If interference of the lever occurs during operation, a short lever can be installed and used- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 36.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cam Lever (QLCA)
IMAO CORPORATION
[Features]
· Since the screw part rotates in the male screw type, the direction of the lever can be adjusted arbitrarily.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 35.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Safe Tension Lever (STF-N, ST-N)
IMAO CORPORATION
Normally, when the lever part is in the free state, pressing the lever pushes the serration into mesh and operation is possible. It is possible to prevent contact malfunction after tightening.
[Features]
· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
· Besides the door knob, all is made from stainless steel, so it is robust and strong.
· In the push lock type, where the gear is used by pressing the lever, when the hand is released, the built-in spring allows the lever to return to its original position and rotate freely again, and it is safe from any incorrect handling- 2D / 3D CAD data available
Starting from∗ ： 40.54 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Tension Lever (TLF-N, TL-N)
IMAO CORPORATION
In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. Large clamping force can be obtained because the lever part is long.
[Features]
· Large clamping force can be reached with lesser force since the thread diameter is thick and the lever is long.
· Besides the door knob, all parts are made from stainless steel, so it is robust and strong- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 37.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 98.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Switch Lever (WL)
IMAO CORPORATION
[Features]
· Standard type lever handle that can be used widely.
· For grip, PG type is used- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 16.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Lever (LL)
IMAO CORPORATION
[Features]
· Standard type lever handle that can be used widely.
· For grip, PC type door knob is used- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 13.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ball and Spring for Snap Method (CLB)
IMAO CORPORATION
Ball and spring for snap method. Besides the CL lever, ECL lever or EGK grip knob can be used.
[Features]
· Optional items for the snap method of the below items.
· ECL ergo controller lever.
· CL controller lever.
· EGK ergo grip knob- Volume Discount
- 2D CAD data available
Starting from∗ ： 1.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Torque Controller Lever (ATCL)
IMAO CORPORATION
[Features]
· Clamp lever with torque setting function / lever position can be changed.
· Tightening torque can be set.
· When the set torque is reached, there is a click feeling that confirms completion of tightening.- 2D / 3D CAD data available
Starting from∗ ： 91.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Type Clamp |
| Type operation |
| Operation Direction |
| Shape |
| L-Shaped Clamp Lever Shape |
| Lever Shape with Knob |
| Mounting Section Type |
| Rotating Radius R(mm) |
| Main Body Material |
| Main Body Surface Treatment |
| Mounting Section Material |
| Mounting Section Surface Treatment |
| Knob Material |
| Surface Treatment of knob |
| Adjustment screw for gap |
| Mounting Section Diameter d(mm) and/or Diameter |
| Mounting Section Length L(mm) |
| Mounting Section Diameter C(mm) |
| Mounting Section Thickness h(mm) |
|
|
|
|
|
|
|
|
|
| |
| Brand | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION |
| Product Series | ||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 169.55 € *Unit price with basic configuration Volume Discount | 36.04 € *Unit price with basic configuration Volume Discount | 35.50 € *Unit price with basic configuration Volume Discount | 40.54 € *Unit price with basic configuration | 37.24 € *Unit price with basic configuration Volume Discount | 98.96 € *Unit price with basic configuration | 16.26 € *Unit price with basic configuration Volume Discount | 13.07 € *Unit price with basic configuration Volume Discount | 1.65 € *Unit price with basic configuration Volume Discount | 91.10 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | Same day |
| Application | Clamp | Clamp | Clamp | Clamp | Clamp | Clamp | Operation | Clamp | Related Components | Clamp |
| Type Clamp | Ratchet mechanism | Clamp Mechanism | Cam Mechanism | Clamp Mechanism | Clamp Mechanism | Clamp Mechanism / Cam Mechanism | - | Clamp Mechanism | - | Clamp Mechanism / Ratchet mechanism |
| Type operation | - | - | - | - | - | - | N/A | - | - | - |
| Operation Direction | Horizontal | Horizontal | Vertical | Horizontal | Horizontal | Vertical | Horizontal | Horizontal | - | Horizontal |
| Shape | L-Shaped | Shape with Knob / Without Knob | L-Shaped | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Shape with Knob | Other | L-Shaped |
| L-Shaped Clamp Lever Shape | - | - | No Set Screw | - | - | - | - | - | - | Set Screw Type |
| Lever Shape with Knob | - | Grip Ball | - | Grip Ball | Grip Ball | Grip Ball | Single lever | Grip Ball | - | - |
| Mounting Section Type | Female Thread / Round Hole / Square Hole | Male thread / Female Thread | Female Thread | Male thread / Female Thread | Male thread / Female Thread | Round Hole | Round Hole | Female Thread / Round Hole | - | Male thread |
| Rotating Radius R(mm) | 150 ～ 400 | 102 ～ 148 | 40 ～ 100 | 87 ～ 128 | 88 ～ 128.5 | 104 ～ 146 | 80 ～ 180 | 50 ～ 100 | - | 60 ～ 90 |
| Main Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Main Body Surface Treatment | Black Oxide | Black Oxide | Black Oxide / Electroless Nickel Plating | Powder Coating | Powder Coating | Black Oxide | Black Oxide | Paint | N/A | Paint |
| Mounting Section Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel |
| Mounting Section Surface Treatment | Black Oxide | Black Oxide | Electroless Nickel Plating / Black Oxide | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Paint | - | Black Oxide |
| Knob Material | - | Phenol | - | Phenol | Phenol | Phenol | Phenol | ABS Resin | - | - |
| Surface Treatment of knob | - | N/A | - | N/A | N/A | N/A | N/A | N/A | - | - |
| Adjustment screw for gap | - | - | N/A | - | - | - | - | - | - | N/A |
| Mounting Section Diameter d(mm) and/or Diameter | 12 ～ M36 | M8 ～ M16 | M4 ～ M10 | 10 ～ 16 | M10 ～ M20 | 8 ～ 12 | 8 ～ 16 | 5 ～ M16 | - | M6 ～ M10 |
| Mounting Section Length L(mm) | - | 30 ～ 60 | - | 30 ～ 60 | 30 ～ 80 | - | - | - | 13 ～ 21 | 15 ～ 40 |
| Mounting Section Diameter C(mm) | - | - | - | - | - | - | - | - | - | - |
| Mounting Section Thickness h(mm) | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Application
- Clamp
- Operation
- Related Components
-
Type Clamp
-
Type operation
-
Operation Direction
-
Shape
-
L-Shaped Clamp Lever Shape
-
Lever Shape with Knob
-
Mounting Section Type
- Male thread
- Female Thread
- Round Hole
- Square Hole
-
Rotating Radius R(mm)
- 25
- 26
- 30
- 33.5
- 36.2
- 39
- 39.9
- 40
- 40.1
- 42
- 43
- 44
- 45
- 46.5
- 47.5
- 47.9
- 48
- 50
- 52.3
- 55
- 59.5
- 60
- 62
- 63
- 63.5
- 64
- 64.5
- 64.9
- 65
- 65.2
- 67
- 68
- 70
- 70.4
- 71.5
- 74
- 75
- 75.5
- 76
- 78
- 78.5
- 79
- 79.5
- 80
- 80.2
- 81
- 81.1
- 82
- 83
- 84
- 84.5
- 85
- 87
- 88
- 88.1
- 88.5
- 89
- 90
- 92
- 93
- 94.5
- 95
- 95.4
- 96
- 96.8
- 97
- 99
- 99.9
- 100
- 101
- 102
- 104
- 106
- 108
- 109
- 109.9
- 110
- 110.9
- 111
- 114
- 115
- 118
- 119
- 120
- 121
- 123
- 123.5
- 125
- 126.5
- 127
- 128
- 128.5
- 130
- 131
- 132
- 134
- 134.5
- 136
- 138
- 140
- 145
- 146
- 148
- 150
- 152
- 157
- 160
- 170
- 180
- 187.5
- 190
- 200
- 230
- 300
- 400
-
Main Body Material
- Stainless Steel
- Steel
- Zinc Alloy
- Polyamide
- Nylon
- Aluminum
- Other
-
Main Body Surface Treatment
-
Mounting Section Material
-
Mounting Section Surface Treatment
-
Knob Material
-
Surface Treatment of knob
-
Adjustment screw for gap
-
Mounting Section Diameter d(mm) and/or Diameter
-
Mounting Section Length L(mm)
-
Mounting Section Diameter C(mm)
-
Mounting Section Thickness h(mm)
Narrow search by specifying Brand
-
- MISUMI (3)
- KIPP (31)
- HALDER (20)
- IMAO CORPORATION (10)
- KONISHI MFG (5)
- EUROFLEX (0)
- ESCO (0)
- NABEYA BI-TECH (0)
- ELESA (0)
- GANTER (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Clamping Levers
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.