KYOCERA Grooving / Cutting Off Holders（Cutting Direction：Right-hand）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Punching Blade KTKB-S Type
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.Starting from∗ ： 258.10 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Lathe Turning / Cutting Holder KGD Model (Combination)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.Starting from∗ ： 125.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)
KYOCERA
If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.Starting from∗ ： 127.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Grooved End Face Blade KGDF Type
KYOCERA
[Features] Machining applications: Flanges, blind holes; compatible insert shape: non-ISO standard; clamping method: non-ISO standard.Starting from∗ ： 116.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slit Tip GDM Type
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.Starting from∗ ： 19.72 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer Diameter Shallow Groove Holder KGBA Type
KYOCERA
[Features] This is a lever lock type holder that can be used for shallow recesses on outer diameters.Starting from∗ ： 118.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
KGDS-S Type Blade for Grooving / Plunging
KYOCERA
[Features] Machining applications: Grooving / parting off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGSStarting from∗ ： 115.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)
KYOCERA
[Features] Machining applications: Grooving; Holder angle (°): 90; Lubrication hole (oil hole): yes; Screw clamp allows good chip evacuation.Starting from∗ ： 144.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type
KYOCERA
[Features] Compatible insert type: Non-ISO standard; Clamping method: Non-ISO standard; Clamping method: Non-ISO standard.Starting from∗ ： 233.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Lathe Turning (Cutter) Holder KGD Model (for Combination / Automatic Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.Starting from∗ ： 119.59 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)
KYOCERA
[Features] Machining applications: Grooving / parting off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGSStarting from∗ ： 126.73 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
![Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type
KYOCERA
One clamp for shallow grooving with outer diameter.
[shank material]SteelStarting from∗ ： 104.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Lathe Turning / Cutting (Multi-Function) Bit GMM Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.Starting from∗ ： 16.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional / Grooving Holder KGM Type (for Automatic Board)
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.Starting from∗ ： 119.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving and End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)
KYOCERA
A holder for the multifunctional tool "TAKINOL" series.
For grooving outside diameters with undercut.Starting from∗ ： 158.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGH Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304289.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGH Type
KYOCERA
[Features] It can be used for shallow grooving on the outer diameter and for GH, GHU and GA inserts.Starting from∗ ： 144.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 56.83 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Inner Diameter Groove SIGE Type Compatible Chip
KYOCERA
B dimension: Indicates machinable groove depth.Starting from∗ ： 24.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Inner Diameter Shallow Groove Holder KIGBA Type
KYOCERA
[Features] Machining applications: Grooving; Holder angle (°): 90; Type: Integrated.Starting from∗ ： 221.20 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
![Large Inner Diameter Deep Grooved Holder [for GH / GHU Tip] KIGH Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [for GH / GHU Tip] KIGH Type
KYOCERA
[Features] Machining applications: Grooving; cutting direction: right; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integratedStarting from∗ ： 297.59 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Slit Tip (For Small Diameters) TKF Type
KYOCERA
[Features]
· Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.Starting from∗ ： 30.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slit Tip GMM Type
KYOCERA
A breaker developed for cutting off, where the sharpness of an automatic lathe or similar is required. Drastically reduces remaining center part.Starting from∗ ： 20.37 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Outer Diameter Shallow Groove Holder KGBAS Type
KYOCERA
One holder with lever lock for flat punctures on outer diameters.
[Shaft material]Steel.Starting from∗ ： 128.66 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
![Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGBS Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGBS Type
KYOCERA
A clamp for shallow grooves on the outside diameter.
[Shank material]SteelStarting from∗ ： 128.66 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.Starting from∗ ： 171.54 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Lathe Turning / Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)
KYOCERA
[Features] Machining applications: Grooving / parting off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS.Starting from∗ ： 118.38 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Multi-Functional / Grooving (Cutting-Off) Chip FGG Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.Starting from∗ ： 36.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Turning / Cutting (Multi-Function) Bit GMM / GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.Starting from∗ ： 13.52 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Multi-Functional / Grooving Holder KGM Type
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.Starting from∗ ： 121.48 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving / End Grooving) KGMM Type
KYOCERA
A holder for the multi-function tool "TAKINOL" series.
For external and face grooving.Starting from∗ ： 158.76 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGHS Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGHS Type
KYOCERA
A clamp holder for deep grooving on the outer diameter.
For deep grooving on the outer diameter.
A right angle type.Starting from∗ ： 165.38 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGA Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGA Type
KYOCERA
A clamp for deep penetrations in the outer diameter.
For deep penetrations in the outer diameter.Starting from∗ ： 144.07 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Aluminum Wheel Outer Diameter, KGMW Type (Outer Diameter, End Face, Profile Machining)
KYOCERA
[Features] Machining applications: Outside diameter, flange and profiling; compatible insert shape: non-ISO standard; clamping method: non-ISO standard.Starting from∗ ： 158.76 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)
KYOCERA
T dimension: Shows the machinable groove depth.Starting from∗ ： 36.32 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.Starting from∗ ： 352.96 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
Inner diameter grooving SIGE model for automatic lathes.Starting from∗ ： 516.44 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
![Small Bore Slotting Holder [for GV Tip]](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304425.jpg?$product_view_b$)
Small Bore Slotting Holder [for GV Tip]
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.Starting from∗ ： 184.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Large Inner Diameter Deep Grooved Holder [for TG Tip] KITG Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [for TG Tip] KITG Type
KYOCERA
[Features] Machining applications: Grooving; Toolholder angle (°): 90; Compatible insert: for GH and GHU inserts; Type: integratedStarting from∗ ： 202.10 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Multi-Functional / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Sliding Grooving Holder KIGM-8 Type (Blade Width 8 mm Tip Use / Large Inner Diameter Deep Grooving)
KYOCERA
Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.Starting from∗ ： 476.05 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
![Large Inner Diameter Deep Grooved Holder [for GIA Tip] KGIA Type](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [for GIA Tip] KGIA Type
KYOCERA
[Features] Machining applications: Grooving; Cutting direction: right; Holder angle (°): 90; Compatible insert: GIA insert.Starting from∗ ： 297.59 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Small Bore End Surface Slotting, EZ Bar Conforming Tip
KYOCERA
T dimension: Shows the machinable groove depth.Starting from∗ ： 63.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Small Bore End Surface Slotting Series, Model VNFG (System Bar)
KYOCERA
The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.Starting from∗ ： 52.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)
KYOCERA
The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.Starting from∗ ： 46.64 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type)
KYOCERA
T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.Starting from∗ ： 111.75 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
![Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA
KYOCERA
[Features] Compatible insert shape: Non-ISO standard; Clamping method: Clamp-On (C); Clamping method: Clamp-On (C)Starting from∗ ： 236.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_b$)
![Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGH Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304289.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [for GH / GHU Tip] KIGH Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_b$)
![Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGBS Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGHS Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_b$)
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGA Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_b$)
![Small Bore Slotting Holder [for GV Tip]](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304425.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [for TG Tip] KITG Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [for GIA Tip] KGIA Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_b$)
![Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Groove Width(mm) |
| Maximum Machining Diameter(mm) |
| Maximum Groove Depth(mm) |
| Cutting Direction |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type) | Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole) | Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type | Lathe Turning (Cutter) Holder KGD Model (for Combination / Automatic Type) | Lathe Turning / Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type) | Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type | Multi-Functional / Grooving Holder KGM Type (for Automatic Board) | Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGH Type | Large Inner Diameter Deep Grooved Holder [for GH / GHU Tip] KIGH Type | Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGBS Type | Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type) | Lathe Turning / Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type) | Lathe Turning / Cutting (Multi-Function) Bit GMM / GMN Model | Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving / End Grooving) KGMM Type | Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGHS Type | Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGA Type | Aluminum Wheel Outer Diameter, KGMW Type (Outer Diameter, End Face, Profile Machining) | Inner Diameter Groove EZG Type (Small Inner Diameter Grooving) | Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole) | Large Inner Diameter Deep Grooved Holder [for TG Tip] KITG Type | Large Inner Diameter Deep Grooved Holder [for GIA Tip] KGIA Type | Small Bore End Surface Slotting Series, Model VNFG (System Bar) | Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type) | Micro Groove Cutter (Twin Bar) Model STWS (Circular Shank for Vertical Cutting Bit: L-Shaped Type) | Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA | ||||||||||||||||||||
| Starting from∗ | 258.10 € *Unit price with basic configuration | 125.47 € *Unit price with basic configuration | 127.36 € *Unit price with basic configuration | 116.67 € *Unit price with basic configuration | 19.72 € *Unit price with basic configuration | 118.37 € *Unit price with basic configuration | 115.17 € *Unit price with basic configuration | 144.07 € *Unit price with basic configuration | 233.68 € *Unit price with basic configuration | 119.59 € *Unit price with basic configuration | 126.73 € *Unit price with basic configuration | 104.15 € *Unit price with basic configuration | 16.04 € *Unit price with basic configuration | 119.09 € *Unit price with basic configuration | 158.76 € *Unit price with basic configuration | 144.07 € *Unit price with basic configuration | 56.83 € *Unit price with basic configuration | 24.99 € *Unit price with basic configuration | 221.20 € *Unit price with basic configuration | 297.59 € *Unit price with basic configuration | 30.44 € *Unit price with basic configuration | 20.37 € *Unit price with basic configuration | 128.66 € *Unit price with basic configuration | 128.66 € *Unit price with basic configuration | 171.54 € *Unit price with basic configuration | 118.38 € *Unit price with basic configuration | 36.34 € *Unit price with basic configuration | 13.52 € *Unit price with basic configuration | 121.48 € *Unit price with basic configuration | 158.76 € *Unit price with basic configuration | 165.38 € *Unit price with basic configuration | 144.07 € *Unit price with basic configuration | 158.76 € *Unit price with basic configuration | 36.32 € *Unit price with basic configuration | 352.96 € *Unit price with basic configuration | 516.44 € *Unit price with basic configuration | 184.47 € *Unit price with basic configuration | 202.10 € *Unit price with basic configuration | 476.05 € *Unit price with basic configuration | 297.59 € *Unit price with basic configuration | 63.76 € *Unit price with basic configuration | 52.12 € *Unit price with basic configuration | 46.64 € *Unit price with basic configuration | 111.75 € *Unit price with basic configuration | 236.61 € *Unit price with basic configuration |
| Min. Shipping Days ： | 9 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 8 Days | 7 Days | 7 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 8 Days | 9 Days | 6 Days | 7 Days | 8 Days | 8 Days | 9 Days | 9 Days | 6 Days | 8 Days | 7 Days | 9 Days | 9 Days | 9 Days | 9 Days | 7 Days | 7 Days | 9 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Groove Depth(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cutting Direction | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand |
| Number of corners for tip use | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Grooved End Face Holder (Round Shack) [for GVF Chip] GIFV Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304784.jpg?$product_view_c$)
![Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGB Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGH Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304289.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [for GH / GHU Tip] KIGH Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304470.jpg?$product_view_c$)
![Outer Diameter Shallow Groove Holder [for GB / GBA Chip] KGBS Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303996.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGHS Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304290.jpg?$product_view_c$)
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGA Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304302.jpg?$product_view_c$)
![Small Bore Slotting Holder [for GV Tip]](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304425.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [for TG Tip] KITG Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304458.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [for GIA Tip] KGIA Type](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/KGIA.jpg?$product_view_c$)
![Small Diameter End Face Grooving Holder [for GVF-AA Chip] Model GFVS - AA](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304661.jpg?$product_view_c$)
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
-
Maximum Machining Diameter(mm)
-
Maximum Groove Depth(mm)
-
Cutting Direction
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Brand
-
- SANDVIK (84)
- KYOCERA (56)
- NGK SPARK PLUG (13)
- KOSHUHA (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Grooving / Cutting Off Holders
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.