KYOCERA Grooving / Cutting Off Holders（Cutting Direction：No-hand）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Lathe Turning / Cutting (Multi-Function) Bit GMM Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.Starting from∗ ： 14.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slit Tip GDG Type
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.Starting from∗ ： 23.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slit Tip GDM Type
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.Starting from∗ ： 15.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional / Grooving (Cutting-Off) Chip GMM Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.Starting from∗ ： 15.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Turning (Cutter) Bit GDM Model
KYOCERA
Conventional insert mounting to new holders is not recommended.Starting from∗ ： 12.00 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Multi-Functional / Grooving (Cutting-Off) Chip GMG Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.Starting from∗ ： 20.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Turning (Cutter) Bit GDG Model
KYOCERA
Conventional insert mounting to new holders is not recommended.Starting from∗ ： 21.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Turning (Cutter) Bit GDMS Model
KYOCERA
Conventional insert mounting to new holders is not recommended.Starting from∗ ： 11.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type
KYOCERA
Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.Starting from∗ ： 54.62 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lathe Turning / Cutting (Multi-Function) Bit GMN Model
KYOCERA
Machinable groove depth is limited depending on workpiece diameter.Starting from∗ ： 12.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_b$)
Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip
KYOCERA
[Features] It uses carbide and cermet materials, and some are CVD and PVD coated.Starting from∗ ： 14.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve
KYOCERA
[Features] No cutting direction; Lubrication hole (oil hole): yes; Compatible sleeve: It can be used in combination with a holder to change the tool runout.Starting from∗ ： 131.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 15.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![Large Inner Diameter Deep Grooved Holder [for GIA Tip] Compatible Chip](//uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_b$)
Large Inner Diameter Deep Grooved Holder [for GIA Tip] Compatible Chip
KYOCERA
Clamp-on type large inner diameter deep grooving holder.Starting from∗ ： 17.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
KGDF Type End Face Grooving GDFM / GDFMS Types
KYOCERA
Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.Starting from∗ ： 10.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Functional / End Face Grooving Holder Compatible Tip
KYOCERA
Takinor multi-functional / end face grooving holder.Starting from∗ ： 13.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 14.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Slit Tip GDMS Type
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.Starting from∗ ： 10.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_b$)
![Large Inner Diameter Deep Grooved Holder [for GIA Tip] Compatible Chip](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Groove Width(mm) |
| Maximum Machining Diameter(mm) |
| Maximum Groove Depth(mm) |
| Cutting Direction |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip | Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type) | Large Inner Diameter Deep Grooved Holder [for GIA Tip] Compatible Chip | |||||||||||||||
| Starting from∗ | 14.77 € *Unit price with basic configuration | 23.08 € *Unit price with basic configuration | 15.38 € *Unit price with basic configuration | 15.38 € *Unit price with basic configuration | 12.00 € *Unit price with basic configuration | 20.17 € *Unit price with basic configuration | 21.09 € *Unit price with basic configuration | 11.55 € *Unit price with basic configuration | 54.62 € *Unit price with basic configuration | 12.78 € *Unit price with basic configuration | 14.86 € *Unit price with basic configuration | 131.14 € *Unit price with basic configuration | 15.38 € *Unit price with basic configuration | 17.41 € *Unit price with basic configuration | 10.78 € *Unit price with basic configuration | 13.41 € *Unit price with basic configuration | 14.77 € *Unit price with basic configuration | 10.83 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Groove Depth(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cutting Direction | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand |
| Number of corners for tip use | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank height(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304313-546.jpg?$product_view_c$)
![Large Inner Diameter Deep Grooved Holder [for GIA Tip] Compatible Chip](http://uk.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005304537-560.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
-
Maximum Machining Diameter(mm)
-
Maximum Groove Depth(mm)
-
Cutting Direction
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Brand
-
- SANDVIK (30)
- KYOCERA (18)
- KOSHUHA (0)
- NGK SPARK PLUG (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Grooving / Cutting Off Holders
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.