MITUTOYO Data Measurement Equipment（Page 6）

?* Information on days to ship and prices

• 

  Digital Precision Level

  MITUTOYO

  A digital Mitutoyo protractor/level designed for making angle measurements in the vertical plane. When zeroed at the horizontal, readings are provided in the same manner as a spirit level, but with the advantage of a range extending all the way to the vertical.

  Starting from∗ ：	524.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Signal ID-C

  MITUTOYO

  This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.
  Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54) Measures MAX/MIN/RANGE (run-out value).
  Saves three different Preset and Tolerance settings.
  Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE) Calculation function Ax. Coefficient A freely definable, x = displacement of the plungerAnalogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgment function

  Starting from∗ ：	871.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Peak Hold ID-C, Inch/Metric

  MITUTOYO

  This indicator is the MAX/MIN/RANGE value holding function model It offers the following benefits:
  The MAX/MIN/RANGE (run-out value) can be measured. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu. Analogue bar graph in the display (12 different scales switchable). GO/±NG tolerance judgement function. This indicator enables the use of a calculation function for the measured value Ax. Coefficient A is freely definable and x = displacement of the plunger. A USB interface box can be used to set up the indicator from PC via dedicated software.

  Starting from∗ ：	499.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Peak Hold ID-C

  MITUTOYO

  This indicator is the MAX/MIN/RANGE value holding function model It offers the following benefits:
  The MAX/MIN/RANGE (run-out value) can be measured. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu. Analogue bar graph in the display (12 different scales switchable). GO/±NG tolerance judgement function. This indicator enables the use of a calculation function for the measured value Ax. Coefficient A is freely definable and x = displacement of the plunger. A USB interface box can be used to set up the indicator from PC via dedicated software.

  Starting from∗ ：	511.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-S

  MITUTOYO

  This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.Exceptional battery life.

  Starting from∗ ：	187.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Calculation ID-C, Inch/Metric

  MITUTOYO

  This indicator allows you to use a calculation function for the measured value Ax+B+Cx-1. The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement). Coefficients A,B and C are freely definable. X = displacement of the plunger. Analogue bar graph in the display (14 different scales switchable) GO/±NG tolerance judgement function. MAX/MIN/RANGE function to measure peak values. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup  via a setup menu. A USB interface box can be used to set up the indicator from PC via dedicated software

  Starting from∗ ：	612.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Calculation ID-C

  MITUTOYO

  This indicator allows you to use a calculation function for the measured value Ax+B+Cx-1. The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement). Coefficients A,B and C are freely definable. X = displacement of the plunger. Analogue bar graph in the display (14 different scales switchable) GO/±NG tolerance judgement function. MAX/MIN/RANGE function to measure peak values. A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup  via a setup menu. A USB interface box can be used to set up the indicator from PC via dedicated software

  Starting from∗ ：	629.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator Signal ID-C, Inch/Metric

  MITUTOYO

  This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output. Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54). Measures MAX/MIN/RANGE (run-out value). Saves three different Preset and Tolerance settings. Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE). Calculation function Ax. Coefficient A freely definable, x = displacement of the plungerAnalogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgment function

  Starting from∗ ：	784.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Indicator Signal ID-C, ANSI/AGD, Inch/Metric

  MITUTOYO

  This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54) Measures MAX/MIN/RANGE (run-out value). Saves three different Preset and Tolerance settings. Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE) Calculation function Ax. Coefficient A freely definable, x = displacement of the plungerAnalogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgment function

  Starting from∗ ：	784.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Indicator Peak Hold, ANSI / AGD, Inch/Metric

  MITUTOYO

  This indicator is the MAX/MIN/RANGE value holding function model It offers the following benefits:
  The MAX/MIN/RANGE (run-out value) can be measured.
  A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu.
  Analogue bar graph in the display (12 different scales switchable).
  GO/±NG tolerance judgement function. This indicator enables the use of a calculation function for the measured value Ax. Coefficient A is freely definable and x = displacement of the plunger. A USB interface box can be used to set up the indicator from PC via dedicated software.

  Starting from∗ ：	523.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-U, Inch/Metric

  MITUTOYO

  This is a slim type of digital indicator with a 25 mm range. The ABSOLUTE Digimatic Indicator ID-U offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.Its compact design makes it ideal for installing into measuring fixtures.Exceptional battery life.

  Starting from∗ ：	254.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-U, ANSI/AGD

  MITUTOYO

  An economical, slim-style Mitutoyo digital indicator with a long battery life suited to installation in measuring jigs. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.

  Starting from∗ ：	251.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-U

  MITUTOYO

  An economical, slim-style Mitutoyo digital indicator with an extemely long battery life suited to installation in measuring jigs where access may be restricted. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.

  Starting from∗ ：	254.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-S, IP53

  MITUTOYO

  This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.Exceptional battery life.

  Starting from∗ ：	401.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-S, ANSI/AGD, IP53

  MITUTOYO

  This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.Exceptional battery life.

  Starting from∗ ：	181.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-S, ANSI/AGD

  MITUTOYO

  This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.Exceptional battery life.

  Starting from∗ ：	181.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-N, IP66

  MITUTOYO

  A Mitutoyo slim-style dustproof and waterproof digital indicator suitable for use in the presence of coolant or cutting oil. ABSOLUTE System scale for error free, high-speed measurement. Functionality includes switchable resolution, tolerance judgement, data hold and readout rotation. SPC data output.

  Starting from∗ ：	278.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-H, BS AC-Adapter

  MITUTOYO

  This is a superior multi-function indicator that gives you high accuracy and high resolution of 0.0005 mm. The Digimatic Indicator ID-H offers you the following benefits:
  2-colour LCD backlight (green and red) provides you with visual GO/±NG tolerance judgement and analogue bar-graph display.
  You can display the maximum, minimum or range (runout value) . Lifting mechanism over 30 mm with cable release (optional). You can carry out zero-setting and presetting with the optional remote controller, without having to touch the indicator. The remote control system can be implemented in advance with the built-in RS-232 interface and a PC. External power supply via AC-Adapter.

  Starting from∗ ：	910.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-F, ASME/ANSI/AGD

  MITUTOYO

  This is a superior multifunction indicator.The ABSOLUTE Digimatic Indicator ID-F offers you the following benefits:
  Bidirectional Digimatic S1 interface Red/Green LCD backlight provides you with visual GO/±NG tolerance judgement Analogue bar-graph display MAX/MIN/RANGE (runout value) function with a frequency of 500 times/s External power supply via AC-Adapter High accuracy and 0.5 µm digital step

  Starting from∗ ：	818.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-F

  MITUTOYO

  This is a superior multifunction indicator.The ABSOLUTE Digimatic Indicator ID-F offers you the following benefits:
  Bidirectional Digimatic S1 interface Red/Green LCD backlight provides you with visual GO/±NG tolerance judgement Analogue bar-graph display MAX/MIN/RANGE (runout value) function with a frequency of 500 times/s External power supply via AC-Adapter High accuracy and 0.5 µm digital step

  Starting from∗ ：	818.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-C, Inch/Metric

  MITUTOYO

  This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.

  Starting from∗ ：	333.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-C, ASME/ANSI Type

  MITUTOYO

  This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.

  Starting from∗ ：	329.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-C

  MITUTOYO

  This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.

  Starting from∗ ：	333.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-Stylus Holder M2/M4

  MITUTOYO

  Multiway stylus holders facilitate the flexible configuration of star styli.

  Starting from∗ ：	1,811.84 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-B, IP66

  MITUTOYO

  This is a back-plunger model that is highly resilient and robust. The ABSOLUTE Digimatic Indicator ID-B offers you the following features:
  It is a back plunger type, with the display viewed from above.
  Its slim body design is ideal for multi-point measurements. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. It has excellent resistance against water and dust (IP66 protection level) allowing you to use it in machining situations that include splashing coolant fluid. You can perform GO/±NG judgement.

  Starting from∗ ：	312.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Switch Box

  MITUTOYO

  This switch box is a distribution box that connects 3-5 Digimatic tools to one channel interface (for example a DMX-1 USB).

  Starting from∗ ：	324.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Interface, Series 63

  MITUTOYO

  The DMX-8/2 8 channel D-SUB9 serial interface is a microcontrolled interface for connecting eight measurement devices, with Digimatic output, to the RS-232C serial port of a computer. The DMX-8/2 model provides power and an ABS/Zero button to operate Series 575 ABS Linear Gauges.

  Starting from∗ ：	150.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Interface Input Tool

  MITUTOYO

  This D-SUB9 serial interface is a microcontrolled interface for connecting one single measurement device, with Digimatic output, to the RS-232C interface of a computer. It offers you the following benefits:
  Easily connect a measuring device to a computer‘s RS-232C serial port.
  No external power supply is needed, as the small level of power needed is supplied by the handshake lines RTS and DTR.

  Starting from∗ ：	399.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Extension Cable

  MITUTOYO

  These extension cables allow you to extend Digimatic data cables up to 14 m, extending the working distance between a measuring instrument and an external device such as a PC or DP-1VA Logger/Printer.

  Starting from∗ ：	331.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Data Logger

  MITUTOYO

  The Digimatic DL-1000 and 1000 M are data loggers designed for storing measurement data recorded by a Digimatic measuring instrument for subsequent output to a computer. They allow you to collect data when away from a PC, and transfer it later. These Digimatic Data Loggers offer the following benefits:
  The measuring device is connected to the I/O port of the DL-1000/1000 M with a data cable, and you can transmit data either using the data button on the measuring device or on the DL-1000/1000 M.For data transfer the devices are connected via an interface to the target computer. Data transfer from the DL-1000/1000 M is executed with the data button or footswitch of an interface or upon request from the respective software. The DL-1000/1000 M is recognised by the measurement device as a Digimatic measurement instrument.You can output data directly to a printer equipped with a Digimatic interface.

  Starting from∗ ：	731.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Straight, Data Button

  MITUTOYO

  ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
  ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
  ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
  DIGIMATIC Workshop Caliper (Series 552)
  ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
  DIGIMATIC Height Gauge (Series 192, 570)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
  Portable Hardness Tester (Series 811)
  ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Micrometer Head (Series 164)
  

  Starting from∗ ：	48.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Straight

  MITUTOYO

  Digimatic/Digimatic 2/Digimatic S1 Interface

  Starting from∗ ：	79.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Round 6-Pin Type

  MITUTOYO

  ABSOLUTE DIGIMATIC Quick Micrometer (Series 227, 293)
  DIGIMATIC Micrometers (Series 293, 314, 317, 323, 324, 326, 331, 340, 342, 343, 369, 389, 395, 406, 422)
  DIGIMATIC Micrometer Heads (Series 164, 350)
  DIGIMATIC Standard Micrometer (Series 121)
  DIGIMATIC Depth Micrometer (Series 329)
  DIGIMATIC Inside Micrometer with jaws (Series 345)
  DIGIMATIC Inside Micrometer (Series 337, 339)
  ABSOLUTE DIGIMATIC Borematic (Series 568)
  Height Micrometer Heightmaster (Series 515)
  Hardness Tester Wizhard (Series 810)
  Hardness Tester Micro Vickers HM/HV (Series 810)

  Starting from∗ ：	60.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Round 10-Pin Type

  MITUTOYO

  This is an overview of available data cables, and how you can connect measuring devices with data output e.g.to a PC. The cables listed are used to connect the measuring devices directly via USB (USB Input Tool Direct Cables) ,  indirectly via standard Digimatic cables and interface box (e.g. DMX box or USB Input Tool Box) , or the U-WAVE-T wireless transmitters (box version) to a PC.

  Starting from∗ ：	72.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Flat Straight Type

  MITUTOYO

  ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
  ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
  ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
  DIGIMATIC Workshop Caliper (Series 552)
  ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
  DIGIMATIC Height Gauge (Series 192, 570)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
  Portable Hardness Tester (Series 811)
  ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Micrometer Head (Series 164)
  

  Starting from∗ ：	37.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Flat L-Shape Type

  MITUTOYO

  ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
  ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
  ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
  DIGIMATIC Workshop Caliper (Series 552)
  ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
  DIGIMATIC Height Gauge (Series 192, 570)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
  Portable Hardness Tester (Series 811)
  ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Micrometer Head (Series 164)
  

  Starting from∗ ：	40.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-B, IP66, ANSI/AGD

  MITUTOYO

  A Mitutoyo dustproof, waterproof, back-plunger type digital indicator suitable for use in the presence of coolant or cutting oil. ABSOLUTE System scale for error free, high-speed measurement. Functionality includes switchable resolution, tolerance judgement, data hold and readout rotation. SPC data output.

  Starting from∗ ：	312.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Flat L-Shape Right Type

  MITUTOYO

  ABSOLUTE DIGIMATIC Dial Indicator IDS/IDC (Series 543)
  ABSOLUTE DIGIMATIC Dial Indicator IDU (Series 575)
  ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
  DIGIMATIC Workshop Caliper (Series 552)
  ABSOLUTE DIGIMATIC Caliper (Series 500 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Caliper (Series 550, 551, 573)
  DIGIMATIC Height Gauge (Series 192, 570)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 547)
  Portable Hardness Tester (Series 811)
  ABSOLUTE DIGIMATIC Bore Gauge (Series 511)
  ABSOLUTE DIGIMATIC Depth Gauge (Series 571 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Scale (Series 572 except IP65/66/67 models)
  ABSOLUTE DIGIMATIC Micrometer Head (Series 164)
  

  Starting from∗ ：	40.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable, Flat 10-Pin Type

  MITUTOYO

  ABSOLUTE DIGIMATIC Indicator ID-F/ID-H (Series 543)
  Portable Surface Roughness Tester SJ-210/301/401/402 (Series 178)
  Profile Projector PJ-Series (Series 303)
  Profile Projector PH-Series (Series 172)
  Height Micrometer CERA Heightmaster (Series 515)
  Linear Height and Height Gauge QM-Series (Series 518)
  Linear Gauge Counter (Series 542)
  LSM-6000 Counter for Laser Scan Micrometer (Series 544)
  Laser Scan Micrometer LSM-9506DIGIMATIC Multi-unit (Series 572)
  MVK-H Hardness Tester (Series 810)
  DIGIMATIC Port for Linear-Scale Counter

  Starting from∗ ：	57.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping Claw

  MITUTOYO

  Clamping claw for fixing of base plates on the measuring table.

  Starting from∗ ：	23.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable with Data Button IP Type

  MITUTOYO

  IP65/66/67 ABSOLUTE DIGIMATIC Thickness Gauge (Series 547)
  IP65/66/67 ABSOLUTE DIGIMATIC Caliper (Series 500, 550, 551, 573)
  IP65/66/67 ABSOLUTE DIGIMATIC Scale (Series 572)
  IP65/66/67 ABSOLUTE DIGIMATIC Depth Gauge (Series 571)
  

  Starting from∗ ：	100.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable with Data Button

  MITUTOYO

  This is an overview of available data cables, and how you can connect measuring devices with data output e.g.to a PC. The cables listed are used to connect the measuring devices directly via USB (USB Input Tool Direct Cables) ,  indirectly via standard Digimatic cables and interface box (e.g. DMX box or USB Input Tool Box) , or the U-WAVE-T wireless transmitters (box version) to a PC.

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable for ID-N/ ID-B

  MITUTOYO

  This is an overview of available data cables, and how you can connect measuring devices with data output e.g.to a PC. The cables listed are used to connect the measuring devices directly via USB (USB Input Tool Direct Cables) ,  indirectly via standard Digimatic cables and interface box (e.g. DMX box or USB Input Tool Box) , or the U-WAVE-T wireless transmitters (box version) to a PC.

  Starting from∗ ：	76.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Cable for External Preset/Zero

  MITUTOYO

  ABSOLUTE DIGIMATIC Indicator ID-N/ID-B (Series 543) with zero-setting terminal

  Starting from∗ ：	191.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylinder Stylus M3 Stainless Steel

  MITUTOYO

  Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded.

  Starting from∗ ：	26.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...