OMRON PLC (Input/Output Units)（Output Format：Other）

?* Information on days to ship and prices

• 

  NX Series Digital Output Unit NX-OD Transistor Output Unit

  OMRON

  Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types
  
  ■ Features
  · Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
  · Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
  · Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
  and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
  controller's control period
  · The use of a removable terminal block improves system maintainability
  · The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
  greatly reduce the time required for wiring work
  · A unit width of only 12 mm realizes space saving (connector type 30 mm)
  · 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
  · Connect to the CJ Series using the EtherNet/IP coupler

  Starting from∗ ：	136.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  NX Series Incremental Encoder Input Unit NX-EC0□□□

  OMRON

  Enables more precise timing control by synchronizing the encoder data with the time data
  
  ■ Features
  · Open-collector-output type and line-driver-output type incremental encoders can be connected
  · High-speed remote I/O control with communications cycle as fast as 125 μs*1
  · Free-run refreshing, synchronous I/O refreshing, or
  task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit
  · The MC Function Module of the NJ/NX/NY5 Controllers allows the encoder
  to be used as a motion axis
  · Latching (1 internal signal and 2 input signals from external devices)
  · Pulse period measurement
  · 32-bit counters (80000000 to 7FFFFFFF HEX)
  · Maximum counting rate: 4 MHz (Line receiver: 4 MHz; Open collector: 500 kHz)
  · Time stamping
  · Maximum and minimum counter value setting
  · Connect to the CJ PLC using the EtherNet/IP coupler
  
  *1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
  *2 Task period prioritized refreshing is available when the NX-ECC203 is used together.

  Starting from∗ ：	642.92 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  C Series C500 CompoNet Slave

  OMRON

  C Series C500 CompoNet Slave

  • Volume Discount

  Starting from∗ ：	495.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  NX Series Position Interface Pulse Output Unit NX-PG0□□□

  OMRON

  Positioning control with pulse outputs to command stepper motor drives and other pulse input motor drives
  
  ■ Features
  · The MC Function Module of the NJ/NX/NY5 Controller allows you to
  connect with as many axes as the NJ/NX/NY5 Controller can control
  · High-speed remote I/O control with communications cycle as fast as 125 μs*1
  · Multiple stepping motors and servo motors can be operated in synchronization by
  using synchronous I/O refreshing or task period prioritized refreshing*2
  · Latching (2 external latch inputs)
  · Open collector pulse outputs up to 500 kHz
  or line driver pulse outputs up to 4 MHz
  · Line driver output models with 2 or 4 channels
  
  *1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
  * *2 Task period prioritized refreshing is available when the NX-ECC203 is used together.

  Starting from∗ ：	643.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Smart DeviceNet I/O [DRT2]

  OMRON

  Smart DeviceNet I/O
  Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding power supply status, I/O response times, operation counters and on-time are continuously recorded and checked against user-defined limits. Any deviation is reported to the control system, as indication to perform machine maintenance and prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function Blocks and HMI Smart Active Parts, allowing program-less visualisation and monitoring from the CJ1 PLCs and NS operator terminals.
  • Compact size IP20 housing
  • Expandable digital I/Os
  • Built-in diagnostics and preventive maintenance functions
  • Detachable I/O terminal blocks
  • Analog I/O with data pre-processing and alarm functions

  Starting from∗ ：	663.07 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Digital I/O Slave Unit with Clamp Terminals [CRT1-□D16SL(-1)]

  OMRON

  Screw-less Terminal Wiring Further Reduces Wiring Work and Saves Labor at the Production Site.
  • Screw-less (M3) design reduces the need for extra tightening.
  • Removable terminal block gives powerful support to maintenance work.
  • One-step wiring. Wire simply by inserting the ferrules.
  • Applicable wire: AWG24 to AWG16 (cross-section: 0.2 to 1.25 mm²

  Starting from∗ ：	837.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  SmartSlice I/O System, I/O Units

  OMRON

  The smartest modular I/O system
  OMRON's SmartSlice I/O system is compact, intelligent and easy. When used with OMRON's CS1/CJ1 DeviceNet or CompoNet master units, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, PLC programming can be minimised. Preventive maintenance data collected by all I/O units can be accessed using CX-Integrator or NS-series Smart Active Parts.
  • Most compact in the market (84 mm high)
  • Easy set-up, backup and restore functions
  • Diagnostics and preventive maintenance data at I/O level
  • Detachable terminal blocks allow hot-swapping without re-wiring
  • 3-wire I/O connection with 'push-in' technology, no screwdriver required

  Starting from∗ ：	166.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...