- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 to 15:00 (CEST) 16/6/2024. We apologize for the inconvenience.
SANKYO DIAMOND INDUSTRIAL Diamond Cutters（Wheel Type：Segment Type）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Diamond Cutter FS2000 (For Cutting Cast Iron Pipes)
SANKYO DIAMOND INDUSTRIAL
[Features]
· Diamond cutter suitable for cutting cast iron pipes.
· The diamond blade tips manufactured using molten metals enable high speed cutting.
[Applications]
· For cutting cast iron pipes, ductile cast iron pipes and powder coated ductile cast iron pipes.Starting from∗ ： 596.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Diamond Cutter, Three Cutter (Dry Type)
SANKYO DIAMOND INDUSTRIAL
[Features]
· Features a diagonal slit for easier cutting chip discharge.
· Also suitable for cutting hard roof tiles such as Sekisyu roof tiles and Mikawa roof tiles.
[Applications]
· For cutting hard roof tiles.Starting from∗ ： 90.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Low Noise Night For Cutting Reinforced Concrete
SANKYO DIAMOND INDUSTRIAL
· Same sharpness but with an added low-noise function
· Improved long life performance
[Features]
· Its special substrate reduces noise and prevents the generation of harsh high-pitched frequencies during cutting.
· Uses high strength diamonds with the diamond later increased by 30%. Features a tip height of 8 mm.
· By employing a turbo tip (uneven tip), the contact surface area with the work material is minimal, the resistance on the tip reduced and the cutting ability improved.
[Applications]
· For cutting reinforced (10-mm rebar) concrete and granite.Starting from∗ ： 90.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Japan Kuroto (Pro) DX Silent For Cutting Asphalt & Concrete
SANKYO DIAMOND INDUSTRIAL
[Features]
· Dedicated blade for road cutters
· Reduced high frequencies
· Same sharpness but with an added low noise function.
[Applications]
· For cutting paved roads
· Asphalt/concrete cutting dual-useStarting from∗ ： 218.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Goketsu With Flange
SANKYO DIAMOND INDUSTRIAL
[Features]
· Diagonal slit: Discharges cutting chips to prevent heat build-up and to maintain sharpness.
· Short tip: Provides a heat dissipating effect and reduces the amount which the substrate shakes.
· Diamond layer: The deeper slit grooves improve cutting chip discharge and sharpness.
· Rounded edge: The tip edges are rounded to prevent chipping and to improve safety.
[Applications]
· For cutting reinforced (10-mm rebar) concrete, granite and blocksStarting from∗ ： 123.19 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Wheel Type |
| Specifications |
| Application |
| Outer Diameter(mm) |
| Blade thickness(mm) |
| Hole Diameter(mm) |
| Tip Height(mm) |
|
|
|
|
| |
| Brand | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL | SANKYO DIAMOND INDUSTRIAL |
| Product Series | |||||
| Starting from∗ | 596.63 € *Unit price with basic configuration | 90.20 € *Unit price with basic configuration | 90.83 € *Unit price with basic configuration | 218.92 € *Unit price with basic configuration | 123.19 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days |
| Product Type | Diamond cutter | Diamond cutter | - | - | Diamond cutter |
| Wheel Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type |
| Specifications | Dry Type | Dry Type | - | Wet type | Dry Type |
| Application | Iron | Tile | For concrete, mortar | For concrete, mortar | For concrete, mortar / Stone Material |
| Outer Diameter(mm) | 305 ～ 355 | 105 | 105 ～ 125 | 305 ～ 355 | 125 |
| Blade thickness(mm) | 3.4 | 1.8 | 2 | 3 ～ 3.2 | 1.9 |
| Hole Diameter(mm) | 30.5 | 20 | 20 ～ 22 | 27 | M10 |
| Tip Height(mm) | 2 | 6 | 8 | 7 | 8 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
- Diamond cutter
- Polyvinyl chloride tube internal surface cutter
-
Wheel Type
- Segment Type
- Wave Type
- Rim Type
-
Specifications
- Dry Type
- Wet type
- Dry and Dry-Wet Type
-
Application
- Iron
- Non-ferrous
- For concrete, mortar
- Stone Material
- Tile
- Resin
-
Outer Diameter(mm)
-
Blade thickness(mm)
-
Hole Diameter(mm)
-
Tip Height(mm)
Narrow search by specifying Brand
-
- LOBTEX (18)
- SANKYO DIAMOND INDUSTRIAL (5)
- SAINT-GOBAIN (5)
- ASAHI DIAMOND INDUSTRIAL (4)
- IWOOD (3)
- MOTOYUKI (3)
- RESITON (3)
- RIKEN DIAMOND INDUSTRY (2)
- ARC GREATTOOL (1)
- EARTH MAN (1)
- GOEI (1)
- TSUBOMAN (1)
- TRUSCO NAKAYAMA (1)
- NORITAKE (0)
- DREMEL (0)
- WAKITA (0)
- TAKEKAWA (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Diamond Cutters
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.