THE CUT Chamfering / Centering Tools（Application：Other）
Search by sub-category
Centering/Countersink
Chamfer, V-Grooves
Inner R
Replaceable Blade Type Chamfering Tools/Tips/Blades
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Starting from∗ ： 143.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V Men-Maru C-MPE-V
THE CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.Starting from∗ ： 103.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Super Mentori-Maru ZERO, MTMS
THE CUT
[Features]
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.
· Can be used like an end mill for machining materials from an un-machined state.
· Positioning precision is further increased for nose R0.4.Starting from∗ ： 146.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Super Mentori-Maru ZERO For Automatic Lathes, MTMS
THE CUT
[Features]
· Employs shank diameters of ø7 and ø10 specialized for automatic lathes.
· Capable of spot cutting.
· Dedicated insert for nose R0.4 further improves positioning precision.
· A type in which the insert can be interchanged so no regrinding/repolishing required.Starting from∗ ： 146.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chamfering Cutter Super Mentori-Maru MTMS 20 / 30
THE CUT
[Features]
· Can be used like an end mill for machining materials from an un-machined state.
· Capable of ramping machining (α = 3°).
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute/4-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.Starting from∗ ： 289.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Chamfering Cutter Super Mentori-Maru MTMS 6.5 / 9
THE CUT
[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·Starting from∗ ： 227.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Super Mentori-Maru ZERO For Lathes, NC-MT
THE CUT
[Features]
· An internal lubrication specification and shank design specialized for use with a lathe.
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.Starting from∗ ： 193.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
| |
| Brand | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT |
| Product Series | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | ||||||
| Starting from∗ | 143.23 € *Unit price with basic configuration | 103.28 € *Unit price with basic configuration | 146.26 € *Unit price with basic configuration | 146.26 € *Unit price with basic configuration | 289.91 € *Unit price with basic configuration | 227.92 € *Unit price with basic configuration | 193.89 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Application | Other | Other | Other | Other | Other | Other | Other |
| Tip angle (θ) | 90° | 60 ～ 120 | - | - | - | - | - |
| Tool Diameter (D)(mm) | 2.8 ～ 12 | 3 ～ 20 | 12 ～ 15.2 | 13 | - | - | 12 ～ 14.5 |
| work material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | - | - | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - |
| Single blade, two blades | Single blade | Single blade | - | - | - | - | - |
| Peripheral Blade Y/N | - | - | - | - | - | - | - |
| Tool Material Type | Carbide | Carbide | - | - | - | - | - |
| Coating Y/N | Available | Available | - | - | - | - | - |
| Coating Type | TiAlN | TiAlN | - | - | - | - | - |
| R Size (R)(mm) | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.92
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 9.53
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 15.88
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Narrow search by specifying Brand
-
- MISUMI (0)
- NOGAJAPAN (24)
- THE CUT (7)
- NINE9 (2)
- DIJET (1)
- FUKUDA (1)
- YAMAWA MFG (1)
- NS TOOL (0)
- MAPAL (0)
- RYOCO SEIKI (0)
- STAR-M (0)
- WALTER TITEX (0)
- SKC (0)
- UNION TOOL (0)
- SPEED TIGER (0)
- NT TOOL (0)
- GUHRING (0)
- ESCO (0)
- WERA (0)
- KYOWA SEIKO (0)
- IWATA TOOL (0)
- FUJIGEN (0)
- 7 LEADERS (0)
- WATERMILLS (0)
- BIG KAISER (0)
- TRUSCO NAKAYAMA (0)
- MAKOTOLOY (0)
- METABO (0)
- OSG (0)
- ASAHI TOOLS (0)
- ALPEN (0)
- ILIX (0)
- EIKOSHA (0)
- DIXI (0)
- DAIICHITOOL (0)
- OKAZAKI SEIKO (0)
- REX TOOLS (0)
- ATOM (0)
- WOLFCRAFT (0)
- TAIYO-TOOL (0)
- SANKO MFG (0)
- SANDVIK (0)
- NAKAJIMAKOUKI (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Chamfering / Centering Tools
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.