Vertical Hold-Down Toggle Clamps（Attaching Method：Flange Base）

?* Information on days to ship and prices

• • Recommendation

  

  Vertical Hold Down Clamps 2002 and 2007

  DESTACO

  Destaco’s 2002 and 2007 Series vertical hold down clamps feature large hand clearance for improved safety, hardened bushings at key pivot points, and near vertical clamping contact. These clamps are used in fixture checking, assembly/testing, light machining, and woodworking.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Recommendation

  

  Horizontal Hold Down Clamps 305, 307 and 309

  DESTACO

  Destaco’s 305, 307, and 309 Series horizontal hold down clamps feature a compact design suitable for use in confined spaces, availability in stainless steel models, and availability with Destaco® Toggle Lock Plus™. These clamps are used in assembly/testing, light machining, closures, and woodworking.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  6800 Vertical acting toggle clamp

  AMF

  Vertical acting toggle clamp with open clamping arm and horizontal base.
  Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated.
  Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection, lock washer for the thrust bolt at the end of the clamping arm.
  Complete with tempered, galvanized clamping screw no. 6890. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.17 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Vertical Hold Down Clamps 207

  DESTACO

  Destaco’s 207 Series vertical hold down clamps feature the largest selection of arms/mounting options, low profile T-Handle versions, and availability in stainless steel. These clamps are used in fixture checking, assembly/testing, light machining, and woodworking.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 392 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.15 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vertical Hold Down Clamps 202

  DESTACO

  Destaco’s 202 Series vertical hold down clamps feature two bar style options, a low profile T-Handle version, and availability in stainless steel. These clamps are used in fixture checking, assembly/testing, light machining, and woodworking.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 2,205 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 1,078 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.81 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vertical Handle / Horizontal Base / 2 Pronged Type

  MISUMI

  [Features] Articulated clamp that can hold both sides of an insertion pin.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 294 N

  MISUMI

  [Features] Vertical clamp with a flange base that holds the underside.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vertical Hold Down Clamps 210

  DESTACO

  Destaco’s 210 Series vertical hold down clamps feature Destaco Toggle Lock Plus versions, accommodations for M10 or 3/8 spindle accessories, and availability in stainless steel. These clamps are used in assembly, testing, light machining, and light welding.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.65 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vertical Hold Down Clamps 500

  DESTACO

  Destaco’s 500 Series vertical hold down clamps feature hardened pivot pins/bushings, weldable clamping bar, and modular design for versatile clamp set up to meet your application requirements. These clamps are used in assembly, welding, and heavy duty production.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	152.44 €
  Min. Shipping Days ：	45 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 784 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Hold-Down Toggle Clamps, Vertical Handle

  SUPER TOOL

  Optimal for inspection, welding, assembly, and machining jigs.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force441 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.09 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical-Handled - U-Shaped Arm (Flange Base) GH-102-B

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 1,960 N

  MISUMI

  [Features] Vertical clamp with flange base that holds the bottom side.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.49 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vertical Hold Down Clamps 2010

  DESTACO

  Destaco’s 2010 Series vertical hold down clamps feature large hand clearance for improved safety, over two times the holding capacity of the 210 Series, and hardened bushings at key pivot points. These clamps are used in fixture checking, assembly/testing, light machining, and woodworking.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	93.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force186 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.01 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, No Clamp Bolt, Clamping Force 882 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.85 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp - T-Shaped Handle - GH-13005 / GH-13005-SS

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.94 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical Handle - U-Shaped Arm (Flanged Base) T-Handle, GH-13008

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  • Stock

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hold-Down Clamp, Vertical Handle, No. HS-10

  KAKUTA

  Optimal for inspection, welding, assembly, and machining jigs.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6800S Vertical toggle clamp with safety latch

  AMF

  Vertical toggle clamp with safety latch for open and clamped positions.
  With open clamping arm and horizontal base.
  Galvanized and passivated. Stainless steel rivets, which run in hardened bushes. Bearings are pre-lubricated.
  Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection. Lock washer for the thrust bolt at the end of the clamping arm.
  Complete with tempered, galvanized clamping screw no. 6890. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	66.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  6811P Heavy vertical toggle clamp

  AMF

  Heavy vertical toggle clamp with horizontal base.
  Reamed and case-hardened bearing bushes.
  Hardened, ground and permanently-lubricated pins. Clamp nuts on lever arm to vary friction in movement. Material: steel, blued. Lever arm made of cast steel, blued. Handle of red, oil-resistant plastic.
  Complete with tempered, galvanized clamping screw no. 6885. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	141.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Vertical Hold Down Clamps 317

  DESTACO

  Destaco’s 317 Series vertical hold down clamps feature dual mounting surfaces, large bar opening angle, and accommodations for spindle accessories. These clamps are used in fixture checking, assembly, testing, light machining, and woodworking.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Vertical Hold Down Clamps 533 and 535

  DESTACO

  Destaco’s 533 and 535 Series heavy-duty, vertical hold down clamps feature hardened steel bushings at pivot points, large bar guides for greater lateral support, and modifiable solid bar to suit your application requirements. These clamps are used in welding and heavy duty clamping.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	207.22 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, U-Shaped Arm, Flange Base, Tip Bolt Slide Adjustment, Tightening Force 3,400 N

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.77 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical-Handled - U-Shaped Arm (Flange Base) GH-13009

  GOODHANDCLAMP

  Toggle clamp with a vertical handle. Maximum clamping pressure: 300N. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. In addition to OEM production, they have offices in Europe and North America, earning praise from a large variety of customers.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.65 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical-Handled - U-Shaped Arm (Flange Base) GH-11502-B

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  • Stock

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hold-Down Clamp, Vertical Handle, No. HV150

  KAKUTA

  Optimal for inspection, welding, assembly, and machining jigs.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical Handle Type TVL-10-A, Clamping Force Adjustment Type

  FLECLAM

  This downward-pressing flange base type ensures ample space for unclamping.
  The balance of the clamping force can be adjusted easily and accurately.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.66 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Forked Clamp / Standard Type

  MISUMI

  [Features] 2-way part for a toggle clamp. -You can choose between standard and compact.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 3,332 N

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.02 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Flange Base, Clamp Bolt Adjustable, Clamping Force 1,470 N

  MISUMI

  [Features] Vertical clamp with flanged base holding the bottom.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical Handle Type - U-Arm (Flange Base) GH-12205

  GOODHANDCLAMP

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.90 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical-Handled - U-Shaped Arm (Flange Base) GH-12502-B

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, U-Shaped Arm, Flange Base, Tip Bolt Slide Adjustment, Tightening Force 2,270 N

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Horizontal - U-Shaped Arm (Flanged Side Surface Base) GH-101-B

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.73 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Clamp - Horizontal - Fixed Main-Axis Arm (Flanged Side Surface Base) GH-12050-SM

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Two-Pronged Attachment

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical-Handled - Long U-Shaped Arm (Flange Base) GH-101-E

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical-Handled - U-Shaped Arm (Flange Base) GH-11002-B

  GOODHANDCLAMP

  A toggle clamp with a vertical handle. Maximum clamping pressure: 700N. Convenient flange base for mounting. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. In addition to OEM production, they have offices in Europe and North America, earning praise from a large variety of customers.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp, Vertical Type, Main Spindle Fixing Arm, Flange Base, Tip Bolt Fixing, Tightening Force 910 N

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Clamp - Vertical-Handled - U-Shaped Arm (Flange Base) GH-12002-B

  GOODHANDCLAMP

  MISUMI-VONA supplies carefully selected products made by leading Asian manufacturers, based on our customers' needs. Please select products according to your intended application. This product is made by a Taiwanese manufacturer, established in 1974, which mainly produces toggle clamps. As well as their own products, they supply OEM products for other manufacturers, and have expanded with manufacturing sites in Europe and North America. This manufacturer is a world leader in jig parts.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...