Holder

?* Information on days to ship and prices

• 

  Beam Steering Holder

  SURUGA SEIKI

  [Features]
  · Types in which only the upper mirror is movable and types in which both the upper and lower mirrors are movable are available.
  · The pitch of the adjustment screw can be selected from 0.5 mm and 0.25 mm.
  · Adhesive fixing and three-point support fixing types are available for the mirror.
  · The lower side of the pole is an M16P (= 1 mm) male screw.
  · Can be fixed to magnetic bases and plates, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	301.20 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Polarizer Holder (Optical Axis 25 mm with Fine Adjustment Function)

  SURUGA SEIKI

  [Features]
  · A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc.
  · The optical axis height is standardized at 25 mm from the bottom.
  · Uses a threaded ring to fix devices.
  · An M4 male-threaded rod is attached.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	266.10 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Lens Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for circular lenses (can also be used with mirrors).
  · Metal frame and shaft only. Does not include a tilt adjustment function.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	130.25 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  Camera Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · HC-T3 and HC-T4 are products in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4).
  · HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	122.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Small X Type Rail

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws, and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	148.06 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Mini-Rail Carrier

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Rails with a cross-section of 20 mm × 10 mm. Used in the configuration of systems such as those for small optical parts and small equipment etc.
  · Use M6 screws to fix to surface plates etc.
  · There are two types of dedicated rail carrier available; large and small. Can be used with M6 and M2 screws, etc.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.31 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Adapter for Isolators

  SURUGA SEIKI

  Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Select to compare

  Configure now
  Starting from∗ ：	149.52 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Power Meter Holder

  SURUGA SEIKI

  [Features]
  · A holder for fixing commercially available power meter sensors.
  · Mainly for fixing rectangular power meter sensors. Constructed so that the sensor will not shift, even when the sensor cable is pulled.
  · Fixing is done using a method of sandwiching with screws from the top.
  · Sensors that can be fixed are of limited availability.
  · Can be directly mounted onto bases with the rods removed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	138.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ring Wrench

  SURUGA SEIKI

  A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	86.59 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Round Laser Holder

  SURUGA SEIKI

  [Features]
  · F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
  · With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
  · Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
  · The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
  · The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
  · The F20 can be attached directly to the breadboard (A65) by removing the rod.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	145.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Variable Slit

  SURUGA SEIKI

  [Features]
  · A double door type variable slit.
  · The slit width is adjusted using the micrometer head.
  · The slit width and the position of the center are constant.
  · V-groove rails and cross rollers are used for the double door slit section guide, decreasing the tilt of the slits during operation.
  · Use a Hartmann plate to adjust the slit height.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	902.84 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Small Mirror Holder (with Lock)

  SURUGA SEIKI

  [Features]
  · A holder for holding small mirrors up to ø30 mm. The tilt (θy, θz) can be adjusted in the two axes.
  · Adhesive type and three-point support type fixing are available for the mirror fixing methods.
  · With the rod-less type, M3 or M6 screws are used for fixing.
  · With the three-point support type (F58N-30-2), mirrors from ø20 to 30 mm can be held by changing the position of the lower supporting pin.
  · The fine tilt-adjustment knob is P = 0.5 mm and can be fixed to a set incline with a lock nut.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	114.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Water-Cooling Adapter

  SURUGA SEIKI

  [Features]
  · A water cooling adapter for F125/F126/F127 LD holders
  · Connect to water tanks which circulate water at low temperatures to enable superior temperature stability and low temperature control.
  · Connect using a 1/4 inch hose (hose not included)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	112.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Centering Lens Holder: Objective Lens, Precision Cross Roller Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.
  · When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	389.53 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Adapter for Iris Diaphragms

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder. The diaphragm diameter can be changed from ø1 to ø12 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	135.85 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Rigidity Cross Motion Holder

  SURUGA SEIKI

  A precision cross motion holder that can support and hold various types of adapter, and finely adjust them in the YZ axes. Includes a direct lock mechanism that can directly fix the movable parts. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	370.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Stability Mirror Holder

  SURUGA SEIKI

  A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	152.38 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  High Performance Mirror Holder (25 mm Optical Axis Type)

  SURUGA SEIKI

  [Features]
  · A compact version of the FM532.
  · Designed with an optical axis height of 25 mm. For use with the Opt Station.
  · A product that is ideal for applications where a high level of precision and alignment is necessary, or where stability and operability are important.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	123.70 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Groove Type Holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for mirrors and charts, etc. Insert the corresponding item into the groove and fix in place with a clamp screw.
  · Duracon® is inserted at the tip of the clamp screw and a fluoropolymer sheet is attached to the other side in order to avoid scratching of the clamped item.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	67.44 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Adapter

  CHUO PRECISION INDUSTRIAL

  [Features]
  · For changing the aperture to fit the holder when using a lens that does not fit

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.97 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Small and Thin Y Type Rail

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Y type aluminum rail.
  · Carriers (the C-211(- 1)P and C-211(- 2)P) can be used for X type rails as is.
  · Can be used with a lower optical axis than X types.
  · The spacing between the M6 counterbore holes for attaching to surface plates is 100 mm.
  · With a lever type magnet stand mounted using the M4 counterbore holes, it is possible to magnetically attach and fix to surface plates, etc.
  · Includes memory with scale.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	347.90 €
  Min. Shipping Days ：	20 Days

  *Unit price with basic configuration

• 

  X Type Rail Stand

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An X type aluminum rail.
  · Slides using a dedicated carrier.
  · Dedicated carriers (the C-211-(1)P and C-211-(2)P) can also be used for Y type rails as is.
  · Includes memory with scale.
  · Various stands and stages can be attached to the dedicated carriers (X type carriers C-211-(1)P and C-211-(2)P) using M16P1 screws and M4 screws, etc.
  · X type rails can be fixed and retained using rail stands or T type carriers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	236.73 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Triple-Axis Lens Holder

  SURUGA SEIKI

  [Features]
  · The B11-40C is employed for the X-axis while the optical axis is configured at 45 mm.
  · Replace the lens and/or adapter to allow for use in different types of application.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	589.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Five-Axis Lens Holder

  SURUGA SEIKI

  Replace the lens and/or adapter to allow for use in different types of application. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	713.22 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  LD Holder

  SURUGA SEIKI

  F511L: fixed type. F512L, F513L: YZ axis adjustable LD holder. Select according to the number of pins and the pin pitch (pin P.C.D.) of the LD.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	122.44 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  LD Holder (Chip Carrier Type)

  SURUGA SEIKI

  [Features]
  · A Chip Carrier type LD holder with a built-in Peltier element.
  · Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
  · The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
  · There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
  · For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
  · The F129-1 water cooling adapter is also available.
  · Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	665.13 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  LD Holder (To-Package Type)

  SURUGA SEIKI

  [Features]
  · A To-Package type LD holder with a built-in Peltier element.
  · Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
  · Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
  · For common anodes and common cathodes, etc., configure by replacing the jumper pins.
  · For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
  · The F129-1 water cooling adapter is also available.
  · Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	665.13 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Threaded Ring

  SURUGA SEIKI

  A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.95 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Polarizer Holder with Tilt Function

  SURUGA SEIKI

  A holder that can retain items such as polarizing plates and wave plates. It can also rotate (θx) and tilt them (θy, θz). Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	573.01 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  Alignment Target

  SURUGA SEIKI

  Can be used for optical system constructions.
  
  [Features]
  · Used for adjusting the optical axis when building an optical system for the Opt Station.
  · Push-down the large target-fixing pin to fix to the tapped hole on the plate board.
  · Return the pin upward to install in any position.
  · The mark on the target is adjusted to a height of 45 mm.
  · Target stickers (black cross on a white base / white cross on a black base) are included.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	135.93 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Camera Holder

  SURUGA SEIKI

  A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	116.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter for Connectors

  SURUGA SEIKI

  [Features]
  · An adapter for optical fiber connectors.
  · An FC type receptacle is included as standard, so please select according to the connector.
  · The FC type receptacle is designed so that when a connector is inserted, the end surface of the ferrule extends about 0.5 mm from the receptacle surface. Ideal for placing in close proximity to other items.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	107.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter for Collimating Lenses

  SURUGA SEIKI

  An adapter for holding ø4 to ø14.5 mm cylindrical items such as collimating lenses, etc. Used by attaching to various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	61.25 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Gimbal Type Mirror Holder

  SURUGA SEIKI

  A holder for fixing items such as mirrors or plate beam splitters etc. The tilt can be adjusted in the two axial directions. The center of rotation and the center of the mirror always coincide when making fine adjustments.
  
  [Features]
  ■ F50, F55
  · Holders for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted.
  · Fine movement of ±4° to 6° is possible, in both θy and θz, by tightening the clamp. Loosening the clamp, allows for coarse movement (adjustment) over 360°.
  · A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
  · The included standard rod is ø 20, and has a length of 60 mm. However the rod length can be changed. The holder's screw holes are M6P = 1. A40 to A42 rods can be used.
  · Mirror Holder F50: For the feeding method, A-type micrometer heads and an E-type screw system are available.
  · Horizontally operated type mirror holder F55: Due to the unique horizontal operation method (the operation system is installed in a horizontal direction), the user can operate it without going in front of the optical axis with their hands. A proximity specification is also available.
  ■ F52
  · A holder for fixing mirrors, plate beam splitters, and lenses, etc. The tilt (θy, θz) can be finely adjusted in the two axial directions.
  · The tilt (θy, θz) of the two axes can be finely adjusted by ±2° or ±3° (F52).
  · A gimbal structure in which the center of rotation and the center of the mirror always coincide when making fine or coarse adjustments.
  · Items such as mirrors are attached and removed using a threaded ring. Includes a resin protective ring.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	211.15 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Slide Lens Holder

  SURUGA SEIKI

  [Features]
  · Used for fixing round/square lenses or cylindrical/rectangular items of any size.
  · The attachment and detachment of elements is done by loosening the slide-clamp screw on the side surface, adjusting the position and, after fixing the screws, fixing the element using the clamp screw on the top.
  · The F44 can hold cylindrical elements such as lenses, while the F45 is suitable for fixing rectangular elements such as cylindrical lenses.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	104.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter for SELFOC Lenses

  SURUGA SEIKI

  An adapter for holding cylindrical items. Used by setting on to fixed type holders and various types of cross motion holder. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	113.99 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Sensor / Laser Holder

  SURUGA SEIKI

  [Features]
  · Can adjust the tilt angle of small sensors and laser pointers.
  · P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	142.67 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Sensor Adapter

  SURUGA SEIKI

  [Features]
  · An adapter for holding round sensors and lasers.
  · The adapter thickness has been set to 12 mm, increasing the holding force.
  · Specify the ø diameter when ordering.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	68.19 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Pin Hole Holder

  SURUGA SEIKI

  [Features]
  · Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.
  · Pin holes with an external diameter of ø16 mm can be used.
  · Fix pin holes with an M20P = 0.5 threaded ring.
  · The optical axis central height is standardized at 25 mm from the bottom.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	398.97 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Adapter for Pin Holes

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder. The applicable diameter of the pin hole is ø16 mm. Attachment and detachment is carried out using a threaded ring system. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.47 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Adapter for Ferrules

  SURUGA SEIKI

  An adapter for holding ferrules. Can hold fibers with not only ferrules but also those with SELFOC lenses, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	81.62 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Prism Holder

  SURUGA SEIKI

  [Features]
  · Configured so that the optical axis height is at the center of the element when the element is 20 mm, and standardized at 25 mm from the bottom.
  · Move the upper sliding part to fix the prism.
  · Use the upper knob to fix without having to move the element.
  · The F551-20 bottom plate features M4 tapped holes. Mount a rod to change to a rod type.
  · F552-20 can be finely adjusted.
  · The elements are positioned using the pins in the three locations.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	103.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rod with Plate

  SURUGA SEIKI

  [Features]
  · Can be fitted with 40 mm stages and holders for Opt Stations, etc.
  · Can be arranged as needed and mounted to cross clamps, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.30 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Mirror Holder

  SURUGA SEIKI

  An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	124.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Mirror Holder (Slit Clamp)

  SURUGA SEIKI

  A mirror holder with a slit-clamp type lock. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	152.33 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

Loading...