Transmissions, Reducers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Bevel Gearbox
ABP ANTRIEBSTECHNIK
High-quality bevel gears with minimised gear backlash for small and medium power ranges, plain bearings of sintered bronze- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 72.72 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
KG Gearbox, B-BOX
KYOUIKU GEAR MFG（KG）
High-precision and compact bevel gearbox. Choose from speed ratios 1: 1 and 1: 2. Abundant lineup of shaft diameters available, from ø3 to ø25. The full surface is the reference surface, and there are no restrictions on the mounting direction.
Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with grease and maintenance-free.- Volume Discount
- Stock
Configure nowStarting from∗ ： 114.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
KG Gearbox, B-SET
KYOUIKU GEAR MFG（KG）
Economy type compact bevel gear set. Shaft diameter ø4~. Choose from speed ratios 1: 1 and 1: 2. Both sides are mounting reference surfaces, and drilled hole machining has been applied to the body to facilitate quick mounting.
Drilled holes can also be used as pilot holes. Plastic cover included.- Volume Discount
- Stock
Configure nowStarting from∗ ： 81.01 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
TB Type Spiral Bevel Gearbox
MAKISHINKO
Small bevel gearbox that is lightweight, low noise, and high efficiency with free mounting direction- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 197.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Bevel Box L Type KBX
KOHARA GEAR INDUSTRY
High-efficiency aluminum die cast compact L type bevel BOX that uses carburized spiral bevel gears to reduce noise. Lubricated with high-grade grease. Maintenance-free.- Volume Discount
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 140.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SB Type Spiral Bevel Gearbox
MAKISHINKO
Silent, powerful and robust bevel gearbox with abundant selectable shaft arrangements that can be used for a wide range of applications- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 433.68 € Min. Shipping Days ： 13 Days *Unit price with basic configuration
-
Bevel Gearboxes DZA, Version A
MAEDLER
General data: 4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min-1 possible.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.- Volume Discount
Configure nowStarting from∗ ： 168.63 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Worm Gear Units KES 30
MAEDLER
Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 30 mm, in 8 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min-1 and operating time 20%, at +20°C.
Permissable operating temperature: -20° to +60°C.- Volume Discount
Configure nowStarting from∗ ： 253.45 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
S Series, K Type
MAKISHINKO
Standard worm reducer with superior results and abundant valuations- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 293.46 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
Bevel Box T Type KBX
KOHARA GEAR INDUSTRY
[Features]
· High-efficiency aluminum die cast compact T type bevel BOX that uses carburized spiral bevel gears to reduce noise.
· Lubricated with high-grade grease. Maintenance-free.- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 151.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Bevel Gearboxes KEK Version A
MAEDLER
Angular drives with high torques at very low dimensions.
Suitable in a wide variety of applications
8 Sizes. Ratio 1:1.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Gearing: Bevel gears from steel, surface hardened.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 3°+/-1°.
Operating time: 20% at 5 min.
Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%.
Permissable operating temperature: -20° to +60°C.- Volume Discount
Configure nowStarting from∗ ： 118.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
![Gear Motor, Standing Type Dual-Shaft Type [PTNFD18]](//uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/PFD.jpg?$product_view_b$)
Gear Motor, Standing Type Dual-Shaft Type [PTNFD18]
TNL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. This company develops small to large type motors with a wide range of applications. Export volume centered on Europe and America is being expanded; share of those areas is 30%. Recently has been actively adopted on manufacturing sites in Southeast Asian countries.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 103.91 € Min. Shipping Days ： 25 Days *Unit price with basic configuration
-
![Gear Motor, Standing Type Single-Shaft Type [PTNFK18]](//uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/WEB-TNL7.jpg?$product_view_b$)
Gear Motor, Standing Type Single-Shaft Type [PTNFK18]
TNL
Standing type single-shaft type gear motor with flange for convenient mounting. Abundant variety to choose from, with reduction ratios from 5 to 1800. The TL company develops small to large type motors with a wide range of applications. Export volume centered on Europe and America is being expanded; share of those areas is 30%. Recently has been actively adopted on manufacturing sites in Southeast Asian countries.- 3D CAD data available
Configure nowStarting from∗ ： 100.98 € Min. Shipping Days ： 25 Days *Unit price with basic configuration
-
MAL Series High-Efficiency Worm Reduction Gear
MAKISHINKO
[Features]
· Lightweight
Aluminum die-cast product body provides a 45% weight reduction in comparison to previous cast-iron models, with improved strength and performance.
· Compact and high-capacity
Approximately 200% increase in product case surface area significantly improves rated heat capacity (compared to previous models)
· Extensive lineup
Extensive lineup caters to any need, with hollow output, solid output, dual input shaft, motors included, etc.Configure nowStarting from∗ ： 379.05 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
Angular Drive OW2, Ratio 1:1, with Polyacetal Bevel Gears
MAEDLER
Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable.
Bevel gears from polyacetal resin, injection-moulded.
• Low cost angular gear drive, ratio 1:1, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Polyacetal: Standard quality with high hardness.
Shaft angle = 90º. Temperature range - 20°C to +100º C.- Volume Discount
Configure nowStarting from∗ ： 31.71 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
FB Type Straight Bevel Gearbox
MAKISHINKO
Small and lightweight bevel gearbox with sturdy design optimal for agricultural machinery and industrial machinery- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 363.17 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
KG Gearbox, W-BOX
KYOUIKU GEAR MFG（KG）
High-precision and compact worm gearbox. Shaft diameter ø5~. Choose from an abundant selection of reduction ratios, from 1: 10 to 1: 50. The full surface is the reference surface, and there are no restrictions on the mounting direction.
Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with lubricating oil.- Volume Discount
Configure nowStarting from∗ ： 216.18 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Miniature Bevel Gearboxes MKU Model L
MAEDLER
Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes
KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing
edge length of 45mm provides it in translation i=1:1 to 4:1.
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
Model L: Straight-through output shaft, slowly turning.
Permiss. Ambient temperature -10°C to +90°C.- Volume Discount
Configure nowStarting from∗ ： 305.45 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bevel Gearboxes HUG, Ratio 1:1
MAEDLER
General: Miniaturised right-angle drives for light duty.
Suitable for manual and short term drive applications.
Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion, high rigidity.
Electrical insulating. Shafts hardened and ground.
Gearing: straight teeth, max. backlash 2º. Speed max. 1,000min-1.
Version A: with steel bevel gears, bonded onto the shafts.
Version B: with polyacetal bevel gears, moulded onto the shafts.- Volume Discount
Configure nowStarting from∗ ： 48.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Worm Gear Units KES 15
MAEDLER
Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 15 mm, in 5 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min-1 and operating time 20%, at +20ºC.
Permissable operating temperature: -20° to +60°C.- Volume Discount
Configure nowStarting from∗ ： 187.11 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
S Series, B Type
MAKISHINKO
Standard worm reducer with superior results and abundant valuations- Volume Discount
Configure nowStarting from∗ ： 277.77 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
S Series, W Type
MAKISHINKO
Standard worm reducer with superior results and abundant valuations- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 277.77 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
Bevel Box L Type CBX
KOHARA GEAR INDUSTRY
Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 16 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 654.31 € Min. Shipping Days ： 19 Days *Unit price with basic configuration
-
Bevel Box T Type CBX
KOHARA GEAR INDUSTRY
Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 8 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,320.30 € Min. Shipping Days ： 19 Days *Unit price with basic configuration
-
KG Gearbox, HY-BOX
KYOUIKU GEAR MFG（KG）
High-precision and compact hypoid gearbox. Shaft diameter ø6~. Choose from speed ratios 1: 5 and 1: 10. The full surface is the reference surface, and there are no restrictions on the mounting direction.
Can be mounted quickly thanks to its drilled hole machining, already completed. Lubricated with grease and maintenance-free.- Volume Discount
Configure nowStarting from∗ ： 326.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Miniature Bevel Gearboxes MKU Model K
MAEDLER
Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes
KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing
edge length of 45mm provides it in translation i=1:1 to 4:1.
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
Model K: Input side C: Transmission ratio for gearing down.
Permiss. Ambient temperature -10°C to +90°C.- Volume Discount
Configure nowStarting from∗ ： 305.45 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bevel Gearboxes KEK Version B
MAEDLER
Angular drives with high torques at very low dimensions.
Suitable in a wide variety of applications
8 Sizes. Ratio 1:1.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Gearing: Bevel gears from steel, surface hardened.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 3°+/-1°.
Operating time: 20% at 5 min.
Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%.
Permissable operating temperature: -20° to +60°C.- Volume Discount
Configure nowStarting from∗ ： 163.20 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
![Gear Motor, Horizontal Type Dual-Shaft Type [PTNLD18]](//uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/PLD.jpg?$product_view_b$)
Gear Motor, Horizontal Type Dual-Shaft Type [PTNLD18]
TNL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. This company develops small to large type motors with a wide range of applications. Export volume centered on Europe and America is being expanded; share of those areas is 30%. Recently has been actively adopted on manufacturing sites in Southeast Asian countries.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 103.91 € Min. Shipping Days ： 25 Days *Unit price with basic configuration
-
![Gear Motor, Horizontal Type Single-Shaft Type [PTNLK18]](//uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/WEB-TNL6.jpg?$product_view_b$)
Gear Motor, Horizontal Type Single-Shaft Type [PTNLK18]
TNL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. This company develops small to large type motors with a wide range of applications. Export volume centered on Europe and America is being expanded; share of those areas is 30%. Recently has been actively adopted on manufacturing sites in Southeast Asian countries.- 3D CAD data available
Configure nowStarting from∗ ： 100.98 € Min. Shipping Days ： 25 Days *Unit price with basic configuration
-
Bevel Gearboxes DZA Model H, Size 2
MAEDLER
General data: Gearbox with hollow shaft on the output side.
Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
The maximum input speed (hollow shaft as input device) for gearing up is 750 min-1 at 2 : 1 and 500 min-1 at 3 : 1.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.- Volume Discount
Configure nowStarting from∗ ： 439.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bevel Gearboxes DZA, Version B
MAEDLER
General data: 4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min-1 possible.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.- Volume Discount
Configure nowStarting from∗ ： 174.24 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bevel Gearboxes DZR, Stainless Steel, Version A
MAEDLER
General data: High resistance to corrosion.
4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min-1 possible.
Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.- Volume Discount
Configure nowStarting from∗ ： 606.15 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bevel Gearboxes DZR, Stainless Steel, Version B
MAEDLER
General data: High resistance to corrosion.
4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min-1 possible.
Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.- Volume Discount
Configure nowStarting from∗ ： 644.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Miniature Bevel Gearboxes MKU Model H
MAEDLER
Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing
edge length of 45mm provides it in translation i=1:1 to 4:1.
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l1 and l2 are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.
Model H: Straight-through output hollow shaft, slowly turning.
Permiss. Ambient temperature -10°C to +90°C.- Volume Discount
Configure nowStarting from∗ ： 322.76 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Angular Drive OW2, Ratio 1:1, with Polyketone Bevel Gears
MAEDLER
Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable.
Bevel gears from polyketone resin, injection-moulded.
• Low cost angular gear drive, ratio 1:1, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking.
Shaft angle = 90º. Temperature range - 20°C to +100º C.- Volume Discount
Configure nowStarting from∗ ： 40.95 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Bevel Gearboxes DZA Model H, Size 3
MAEDLER
General data: Gearbox with hollow shaft on the output side.
Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
The maximum input speed (hollow shaft as input device) for gearing up is 750 min-1 at 2 : 1 and 500 min-1 at 3 : 1.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.- Volume Discount
Configure nowStarting from∗ ： 634.04 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Worm Gear Units KES 20
MAEDLER
Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 20 mm, in 7 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min-1 and operating time 20%, at +20ºC.
Permissable operating temperature: -20° to +60°C.- Volume Discount
Configure nowStarting from∗ ： 200.56 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Angular Drive OW3, Ratio 1:1, Version 20
MAEDLER
Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.
Version 20: Three shafts with three bevel gears.
Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it's sense of rotation be chosen freely.- Volume Discount
Configure nowStarting from∗ ： 44.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Angular Drive OW3, Ratio 1:1, Version 30 L
MAEDLER
Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.
Version 30 L: Two shafts with two bevel gears.
On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.- Volume Discount
Configure nowStarting from∗ ： 44.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Angular Drive OW3, Ratio 1:1, Version 30 R
MAEDLER
Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.
Version 30 R: Two shafts with two bevel gears.
On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.- Volume Discount
Configure nowStarting from∗ ： 44.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
![Gear Motor, Standing Type Dual-Shaft Type [PTNFD18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/PFD.jpg?$product_view_b$)
![Gear Motor, Standing Type Single-Shaft Type [PTNFK18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/WEB-TNL7.jpg?$product_view_b$)
![Gear Motor, Horizontal Type Dual-Shaft Type [PTNLD18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/PLD.jpg?$product_view_b$)
![Gear Motor, Horizontal Type Single-Shaft Type [PTNLK18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/WEB-TNL6.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Mounting Division |
| Type |
| Reduction Ratio |
| Shaft Diameter(φ) |
| The presence or absence of motor |
| Output shaft type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ABP ANTRIEBSTECHNIK | KYOUIKU GEAR MFG（KG） | KYOUIKU GEAR MFG（KG） | MAKISHINKO | KOHARA GEAR INDUSTRY | MAKISHINKO | MAEDLER | MAEDLER | MAKISHINKO | KOHARA GEAR INDUSTRY | MAEDLER | TNL | TNL | MAKISHINKO | MAEDLER | MAKISHINKO | KYOUIKU GEAR MFG（KG） | MAEDLER | MAEDLER | MAEDLER | MAKISHINKO | MAKISHINKO | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG（KG） | MAEDLER | MAEDLER | TNL | TNL | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
| Starting from∗ | 72.72 € *Unit price with basic configuration Volume Discount | 114.21 € *Unit price with basic configuration Volume Discount | 81.01 € *Unit price with basic configuration Volume Discount | 197.90 € *Unit price with basic configuration Volume Discount | 140.68 € *Unit price with basic configuration Volume Discount | 433.68 € *Unit price with basic configuration Volume Discount | 168.63 € *Unit price with basic configuration Volume Discount | 253.45 € *Unit price with basic configuration Volume Discount | 293.46 € *Unit price with basic configuration Volume Discount | 151.66 € *Unit price with basic configuration | 118.02 € *Unit price with basic configuration Volume Discount | 103.91 € *Unit price with basic configuration | 100.98 € *Unit price with basic configuration | 379.05 € *Unit price with basic configuration | 31.71 € *Unit price with basic configuration Volume Discount | 363.17 € *Unit price with basic configuration Volume Discount | 216.18 € *Unit price with basic configuration Volume Discount | 305.45 € *Unit price with basic configuration Volume Discount | 48.33 € *Unit price with basic configuration Volume Discount | 187.11 € *Unit price with basic configuration Volume Discount | 277.77 € *Unit price with basic configuration Volume Discount | 277.77 € *Unit price with basic configuration Volume Discount | 654.31 € *Unit price with basic configuration | 1,320.30 € *Unit price with basic configuration | 326.39 € *Unit price with basic configuration Volume Discount | 305.45 € *Unit price with basic configuration Volume Discount | 163.20 € *Unit price with basic configuration Volume Discount | 103.91 € *Unit price with basic configuration | 100.98 € *Unit price with basic configuration | 439.47 € *Unit price with basic configuration Volume Discount | 174.24 € *Unit price with basic configuration Volume Discount | 606.15 € *Unit price with basic configuration Volume Discount | 644.91 € *Unit price with basic configuration Volume Discount | 322.76 € *Unit price with basic configuration Volume Discount | 40.95 € *Unit price with basic configuration Volume Discount | 634.04 € *Unit price with basic configuration Volume Discount | 200.56 € *Unit price with basic configuration Volume Discount | 44.02 € *Unit price with basic configuration Volume Discount | 44.02 € *Unit price with basic configuration Volume Discount | 44.02 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 5 Days | Same day | 5 Days | 5 Days | 13 Days | 4 Days | 4 Days | 20 Days | 5 Days | 4 Days | 25 Days | 25 Days | 20 Days | 4 Days | 14 Days | Same day | 4 Days | 4 Days | 4 Days | 20 Days | 20 Days | 19 Days | 19 Days | 5 Days | 4 Days | 4 Days | 25 Days | 25 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Mounting Division | - | No Leg | No Leg | With Leg | Flange | With Leg | - | - | With Leg | Flange | - | Flange | Flange | No Leg | - | No Leg | No Leg | - | - | - | With Leg | With Leg | Flange With Leg | Flange With Leg | No Leg | - | - | With Leg | With Leg | - | - | - | - | - | - | - | - | - | - | - |
| Type | - | Bevel gear | Bevel gear | Bevel gear | Bevel gear | Bevel gear | Bevel gear | Worm Gear | Worm Gear | Bevel gear | Bevel gear | - | - | Worm Gear | - | Bevel gear | Worm Gear | Bevel gear | Bevel gear | Worm Gear | Worm Gear | Worm Gear | Bevel gear | Bevel gear | Other | Bevel gear | Bevel gear | - | - | Bevel gear | Bevel gear | Bevel gear | Bevel gear | Bevel gear | - | Bevel gear | Worm Gear | - | - | - |
| Reduction Ratio | - | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | - | - | 10 ～ 60 | 1 ～ 2 | - | 5 ～ 200 | 5 ～ 1800 | 30 ～ 60 | - | 1 ～ 2 | 10 ～ 50 | - | - | - | 10 ～ 60 | 10 ～ 60 | 1 ～ 2 | 2 | 5 ～ 10 | - | - | 5 ～ 200 | 5 ～ 1800 | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Diameter(φ) | - | 3 ～ 25 | 4 ～ 12 | 11 ～ 19 | 10 ～ 20 | 19 ～ 50 | 8 ～ 25 | - | 17 ～ 55 | 10 ～ 20 | - | 18 ～ 32 | 18 ～ 32 | 25 ～ 30 | - | 19 ～ 38 | 5 ～ 8 | - | - | - | 17 ～ 32 | 17 ～ 32 | 18 ～ 40 | 32 ～ 40 | 6 ～ 12 | - | - | 18 ～ 32 | 18 ～ 32 | 14 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | - | - | 19 | - | - | - | - |
| The presence or absence of motor | - | N/A | N/A | N/A | N/A | N/A | - | - | N/A | N/A | - | - | - | N/A | - | N/A | N/A | - | - | - | N/A | N/A | N/A | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Output shaft type | - | Solid / Hollow | Solid | Solid | Solid | Solid | - | - | Solid | Solid | - | - | - | Solid | - | Solid | Solid | - | - | - | Solid | Solid | Solid | Solid | Solid | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Gear Motor, Standing Type Dual-Shaft Type [PTNFD18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/PFD.jpg?$product_view_c$)
![Gear Motor, Standing Type Single-Shaft Type [PTNFK18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/WEB-TNL7.jpg?$product_view_c$)
![Gear Motor, Horizontal Type Dual-Shaft Type [PTNLD18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/PLD.jpg?$product_view_c$)
![Gear Motor, Horizontal Type Single-Shaft Type [PTNLK18]](http://uk.misumi-ec.com/linked/material/mech/TNL1/PHOTO/WEB-TNL6.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Mounting Division
-
Type
-
Reduction Ratio
-
Shaft Diameter(φ)
-
The presence or absence of motor
-
Output shaft type
Brand
CAD data type
-
- 2D
- 3D
Categories related to Transmissions, Reducers
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.