Shaft Couplings（Allowable Torque Range：1.01 to 3.00 Page 3）
Filter products by: Type
-
With Slit -
Disc Type -
Oldham Type -
Jaw Type -
Bellows Type -
Others -
Vibration Damping Rubber Type
?* Information on days to ship and prices
-
Servo couplings / grub screw clamping, hub clamping / 2 discs: steel, PA, CFRP / body: aluminium / ML, MLC / ADVANCED
ADVANCED
· Universal type resistant to misalignment
· Multiple disc materials support a wide range of uses
· Polyimide - Demonstrates outstanding flexibility and low reaction force even if misaligned, and causes no phase or torque fluctuation
· Well-balanced versatile type featuring excellent carbon FRP-flexibility, transmission torque, and torsional rigidity
· Stainless steel flat spring (SUS) - Inferior flexibility, but high transmission torque and torsional rigidity, so it is ideal for highly responsive servo systemsConfigure nowStarting from∗ ： 38.98 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Torsionally-Stiff Couplings HB
MAEDLER
Material:
Up to D1 = 28 mm hubs made from brass, chromated and passivated.
From D1 = 41.4 mm aluminium alloy with iridite NCP finish.
Torque disc made from black polyacetal.
These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties
Applications: pulse-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers).
Temperature range: -20ºC to +60ºC.- Volume Discount
Configure nowStarting from∗ ： 37.75 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Servo couplings / hub clamping / 1 disc: steel / body: aluminium / MHS / NBK
NABEYA BI-TECH
Backlash "0"
[Features]
· Disk type flexible coupling.
· Stainless steel disk allows eccentricity, angle deviation, and end play.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 75.84 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Timing belt profile couplings / grub screw clamping / PU / body: zinc die-cast / MF / NIHON MINIATURE
NIHON MINIATURE
Low cost coupling that uses zinc die casting for the hub part (boss part), and urethane rubber for the sleeve.
[Features]
· MF coupling consists of one rubber sleeve and two hubs made of zinc die-cast (surface treated).
· Sleeves and hubs have splines on inner and outer diameters, respectively, which engage and transmit torque.
· Fastening to shaft is by set screw.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 19.11 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Slit couplings / grub screw clamping / cross slot / body: aluminium / MC / ORIENTAL MOTOR
ORIENTAL MOTOR
Low backlash of 0, and low moment of inertia specification
[Features]
· Backlash 0.
· High torsional rigidity and excellent responsiveness.
· Low inertia.- Volume Discount
Configure nowStarting from∗ ： 55.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Servo couplings / hub clamping, feather key / 1 disc: steel / body: aluminium / SDA / SUNGIL
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 29.47 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Slit couplings / hub clamping, feather key / cross slot / body: stainless steel / SRBS, SRBMS / SUNGIL
SUNGIL
Clamping type slit coupling that has a low moment of inertia and is stable even at high rotations.
[Features]
・ Spring with 0 backlash and radial beam absorbs eccentricity, declination, and end play.
·A short type with high torsional rigidity and torque tolerance.
·It has identical forward/reverse rotation characteristics, requires no repairs, and has high oil and chemical resistance.
[Applications]
・ Optimal for serial drive of transmission equipment, position control / positioning table, robot system, boring, and polishing machine.
·Can be used for machining centers (machine tools), medical equipment, servo motors, and speed reducers.- 3D CAD data available
Configure nowStarting from∗ ： 37.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Slit couplings / grub screw locking, feather key / cross slot / body: stainless steel / SRBS-22 / SUNGIL
SUNGIL
This set screw type slit coupling has a low moment of inertia and stability even at high RPM.
[Features]
・ Spring with 0 backlash and radial beam absorbs eccentricity, declination, and end play.
·A long type, with high torsional rigidity and torque tolerance, and high oil and chemical resistance.
・ The characteristics of forward/reverse rotation are the same and no repair is required.
[Applications]
・ Optimal for serial drive of transmission equipment, position control / positioning table, robot system, boring, and polishing machine.
·Can be used for machining centers (machine tools), medical equipment, servo motors, speed reducers, etc.- 3D CAD data available
Configure nowStarting from∗ ： 38.02 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Servo couplings / grub screw clamping, feather key / 2 discs: steel / body: aluminium / SDWB / SUNGIL
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.59 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Bar couplings / grub screw clamping / body: GRP, POM / GJ / ADVANCED
ADVANCED
· Compared to UJ, the slit part is longer and the allowable misalignment amount when using alone is improved
· Single item easily absorbs curves and misalignment
· Smooth rotary transmission in a compact design
· For rotation transmission parts that require electric insulationConfigure nowStarting from∗ ： 9.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Claw pin couplings / hub clamping / pin: synthetic rubber / body: aluminium / QRU / ADVANCED
ADVANCED
· A soft cushion type coupling
· Supports eccentric and deflection angle mechanisms
· Can also be used for a rotation mechanism with vibration
· The cushion is available in soft (S) and hard (H) and can be easily attached and removed
· The cushion is an insulating type made of synthetic rubber- Volume Discount
Configure nowStarting from∗ ： 29.13 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Torsionally-Stiff Couplings HF with Blind Holes
MAEDLER
Material: Hubs made from aluminium alloy with iridite NCP finish.
Sliding disc made from black polyacetal.
These 3-part zero-backlash couplings provide electrical insulation.
They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces.
Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc.
Temperature range: -20ºC to +60ºC.- Volume Discount
Configure nowStarting from∗ ： 22.76 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Torsionally-Stiff Couplings HFD with Through Holes
MAEDLER
Material: Hubs made from aluminium alloy with iridite NCP finish.
Sliding disc made from black polyacetal.
These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc.
They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces.
Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc.- Volume Discount
Configure nowStarting from∗ ： 28.07 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Torsionally-Stiff Couplings HU
MAEDLER
Material:
Up to D1 = 28 mm hubs made from brass, chromated and passivated.
From D1 = 41.4 mm aluminium alloy with iridite NCP finish.
Torque disc made from black polyacetal.
These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties.
Applications: pulse-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers).
Temperature range: -20ºC to +60ºC.- Volume Discount
Configure nowStarting from∗ ： 25.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Set-Screw Couplings TR, Stainless Steel, without Keyway
MAEDLER
Material: Stainless Steel 1.4305 (AISI 303).
Bore tolerance: +0.05 mm.
These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly aligned shafts.- Volume Discount
Configure nowStarting from∗ ： 40.85 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Universal joint couplings / hub clamping / 1 joint / body: aluminium / XUT / NBK
NABEYA BI-TECH
Small eccentricity reaction force, high torque, high torsional rigidity, highly responsive, with vibration absorption.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 98.83 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Slit couplings / hub clamping / cross slot / body: stainless steel / XSTS, XWSS / NBK
NABEYA BI-TECH
Low particle. Chemical resistant SUS316L made. Backlash "0"- 2D / 3D CAD data available
Configure nowStarting from∗ ： 114.39 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Slit couplings / hub clamping / cross slot / body: PEEK / MSXP / NBK
NABEYA BI-TECH
Micro-volume out gas. Clean.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 180.04 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Bellow couplings / grub screw / bellows: stainless steel / body: aluminium / MB / MIGHTY
MIGHTY
- Volume Discount
Configure nowStarting from∗ ： 101.74 € Min. Shipping Days ： 13 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
![Slit Type Coupling - Set Screw Type [SAA1521]](//uk.misumi-ec.com/linked/material/mech/LNK1/PHOTO/20056.jpg?$product_view_b$)
Slit Type Coupling - Set Screw Type [SAA1521]
LINK
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. Coupling and support unit manufacturer with headquarters in Guangzhou, China where the industry is thriving. LINK The company 's couplings are attractive, having a wide selection of international standards, and much variety.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 40.31 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Slit Type Coupling - Set Screw Type SAC/SSC
LINK
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. Coupling and support unit manufacturer with headquarters in Guangzhou, China where the industry is thriving. LINK The company 's couplings are attractive, having a wide selection of international standards, and much variety.- Volume Discount
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Slit Shape Coupling - Clamping Type SACC/SSCC
LINK
Slit type couplings are suitable for applications where rotational accuracy is required. Product that achieves high responsiveness, with low moment of inertia. LINK Coupling and support unit manufacturer with headquarters in Guangzhou, China where the industry is thriving. LINK The company's couplings are attractive, having a wide selection of international standards, and much variety.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 25.56 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Slit couplings / hub clamping, feather key / cross slot / body: stainless steel / SRBMS / SUNGIL
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.- 3D CAD data available
Configure nowStarting from∗ ： 41.16 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Servo couplings / grub screw clamping, feather key / 2 discs: steel / body: aluminium / SDWA / SUNGIL
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.59 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ring jaw couplings / hub clamp / claw disc: laminated rubber, 3-star / Body: aluminium / STF / MIKI PULLEY
MIKI PULLEY
Newly developed multi-layer rubber element achieves high attenuation and low recoil force. Couplings with high damping performance. For servo and stepper motors.
Integrated structure with no backlash that adopts HNBR for the power transmitting element. Damps vibration more quickly than a flexible coupling using metal for the elastic part.
This makes it possible to inhibit resonance, a phenomenon which tends to occur with stepper motors, etc. Helps avoid resonance over a wide range of operating speeds. Provides stable high speed control.
Furthermore, by using a layered rubber element sandwiched between HNBR with different levels of hardness, the shaft reaction force due to misalignment is reduced. The burden on the counter shaft and bearing can be reduced drastically.- Volume Discount
Configure nowStarting from∗ ： 57.49 € Min. Shipping Days ： 94 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Bar couplings / grub screw clamping / body: plastics, metal insert / EGJ, EGP / ADVANCED
ADVANCED
· The soft coupling helps reduce the rotational energy loss
· Soft yet with high torque rigidity and low rotation angle error
· Select from two types of resin material by softness and torque properties
· Features a mechanism in which torque is low on the motive side, making it effective for use when accurate and stable rotations are required.
· A highly reliable specification with approx. 10 times longer rotational life compared to UJ and GJ types
· Withstand Voltage 1,000 V- Volume Discount
Configure nowStarting from∗ ： 16.06 € Special price Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Torsionally-Stiff Couplings HZ with Blind Holes
MAEDLER
Material: Hubs made from aluminium alloy with iridite NCP finish.
Sliding disc made from black polyacetal.
These 3-part zero-backlash couplings provide electrical insulation.
They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces.
Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc.
Temperature range: -20ºC to +60ºC.- Volume Discount
Configure nowStarting from∗ ： 19.25 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Torsionally-Stiff Couplings HZD with Through Holes
MAEDLER
Material: Hubs made from aluminium alloy with iridite NCP finish.
Sliding disc made from black polyacetal.
These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc.
They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces.
Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc.- Volume Discount
Configure nowStarting from∗ ： 25.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Set-Screw Couplings TR, Stainless Steel, with Keyway
MAEDLER
Material: Stainless Steel 1.4305 (AISI 303).
Bore tolerance: +0.05 mm.
These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly aligned shafts.- Volume Discount
Configure nowStarting from∗ ： 56.28 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
![Slit Type Coupling - Set Screw Type [SAA1521]](http://uk.misumi-ec.com/linked/material/mech/LNK1/PHOTO/20056.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Allowable Misalignment |
| Application |
| Allowable Torque Range(N•m) |
| Shaft Bore Dia. (machined) D1(mm) |
| Shaft Bore Dia. (machined) D2(mm) |
| Outer Dia. A(mm) |
| Overall Length W(mm) |
| Max. Rotational Speed Range(r/min) |
| Feature |
| Body Material |
| Category |
| Allowable Torque(Nm) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
| Buffer Part Material |
| Disc Part Material |
| Bellows Part Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ADVANCED | MAEDLER | NABEYA BI-TECH | NIHON MINIATURE | ORIENTAL MOTOR | SUNGIL | SUNGIL | SUNGIL | SUNGIL | ADVANCED | ADVANCED | MAEDLER | MAEDLER | MAEDLER | MAEDLER | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA BI-TECH | MIGHTY | LINK | LINK | LINK | SUNGIL | SUNGIL | MIKI PULLEY | ADVANCED | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Servo couplings / hub clamping / 1 disc: steel / body: aluminium / MHS / NBK | Slit couplings / grub screw clamping / cross slot / body: aluminium / MC / ORIENTAL MOTOR | Servo couplings / hub clamping, feather key / 1 disc: steel / body: aluminium / SDA / SUNGIL | Bar couplings / grub screw clamping / body: GRP, POM / GJ / ADVANCED | Claw pin couplings / hub clamping / pin: synthetic rubber / body: aluminium / QRU / ADVANCED | Universal joint couplings / hub clamping / 1 joint / body: aluminium / XUT / NBK | Slit couplings / hub clamping / cross slot / body: stainless steel / XSTS, XWSS / NBK | Slit couplings / hub clamping / cross slot / body: PEEK / MSXP / NBK | Bellow couplings / grub screw / bellows: stainless steel / body: aluminium / MB / MIGHTY | Slit couplings / hub clamping, feather key / cross slot / body: stainless steel / SRBMS / SUNGIL | Bar couplings / grub screw clamping / body: plastics, metal insert / EGJ, EGP / ADVANCED | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||
| Starting from∗ | 38.98 € *Unit price with basic configuration | 37.75 € *Unit price with basic configuration Volume Discount | 75.84 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 19.11 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 55.21 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 29.47 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 37.35 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 38.02 € *Unit price with basic configuration | 19.59 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 9.49 € *Unit price with basic configuration | 29.13 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 22.76 € *Unit price with basic configuration Volume Discount | 28.07 € *Unit price with basic configuration Volume Discount | 25.33 € *Unit price with basic configuration Volume Discount | 40.85 € *Unit price with basic configuration Volume Discount | 98.83 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 114.39 € *Unit price with basic configuration | 180.04 € *Unit price with basic configuration | 101.74 € *Unit price with basic configuration Volume Discount | 40.31 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 10.21 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 25.56 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 41.16 € *Unit price with basic configuration | 19.59 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 | 57.49 € *Unit price with basic configuration | 16.06 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 19.25 € *Unit price with basic configuration Volume Discount | 25.43 € *Unit price with basic configuration Volume Discount | 56.28 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 10 Days | 4 Days | Same day | Same day | Same day | Same day | Same day | 11 Days | Same day | 5 Days | Same day | 4 Days | 4 Days | 4 Days | 4 Days | Same day | 14 Days | 9 Days | 13 Days | Same day | Same day | Same day | 10 Days | Same day | 94 Days | 10 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
| ||||||||||||||||||||||||||||
| Type | Disc Type | - | Disc Type | Oldham Type | With Slit | Disc Type | With Slit | With Slit | Disc Type | Disc Type | Jaw Type | - | - | - | - | With Slit | With Slit | With Slit | Bellows Type | With Slit | With Slit | With Slit | With Slit | Disc Type | Vibration Damping Rubber Type | Disc Type | - | - | - |
| Allowable Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | - | Angular Misalignment / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | - | - | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | - | - | - | - | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | - | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | - | - | - |
| Application | Standard / Servo Motor | - | Standard / Stepping Motor | Standard | Standard / Stepping Motor | Servo Motor / Stepping Motor | Stepping Motor | Stepping Motor | Servo Motor / Stepping Motor | Standard | Standard | - | - | - | - | Servo Motor / Stepping Motor | Stepping Motor | Standard | Standard / Servo Motor / Stepping Motor / Encoder | Standard | Standard | Standard | Stepping Motor | Servo Motor / Stepping Motor | Servo Motor / Stepping Motor | Standard | - | - | - |
| Allowable Torque Range(N•m) | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 | 1.01 to 3.00 |
| Shaft Bore Dia. (machined) D1(mm) | 4 ～ 16 | - | 6 ～ 10 | 6 ～ 16 | 10 | 3 ～ 15 | 3 ～ 12 | 3 ～ 12 | 3 ～ 15 | 8 ～ 12 | 6 ～ 16 | - | - | - | - | 5 ～ 20 | 5 ～ 8 | 10 ～ 15 | 3 ～ 8 | 6 | 4 ～ 6 | 5 | 3 ～ 12 | 3 ～ 15 | 6.35 | 3 ～ 12 | - | - | - |
| Shaft Bore Dia. (machined) D2(mm) | 4 ～ 16 | - | 6 ～ 10 | 6 ～ 16 | 12 | 3 ～ 15 | 3 ～ 12 | 3 ～ 12 | 3 ～ 15 | 4 ～ 12 | 6 ～ 16 | - | - | - | - | 5 ～ 20 | 6 ～ 10 | 14 ～ 15 | 6 ～ 12 | 8 | 4 ～ 6 | 8 | 3 ～ 12 | 3 ～ 15 | 6.35 | 3 ～ 12 | - | - | - |
| Outer Dia. A(mm) | 20 ～ 32 | - | 32 | 30 | 25 | 22.2 ～ 31.8 | 12.7 ～ 26.2 | 12.7 ～ 26.2 | 16 ～ 31.8 | 19 ～ 28 | 22 ～ 35 | - | - | - | 18 | 25 ～ 40 | 25 | 36 | 20 ～ 26 | 19.5 | 16 | 20 | 12.7 ～ 26.2 | 16 ～ 31.8 | 19 | 22 ～ 28 | - | - | 18 |
| Overall Length W(mm) | 26 ～ 41 | - | 32 | 33 | 31 | 33 ～ 44.7 | 14 ～ 23 | 18 ～ 30 | 17.6 ～ 29.5 | 24 ～ 34.4 | 24.5 ～ 39 | - | - | - | - | 27 ～ 40 | 25 ～ 31 | 35 | 31 ～ 54.3 | 24.5 | 23 | 26 | 19 ～ 31.4 | 15.6 ～ 26 | 25 | 22.2 ～ 32 | - | - | - |
| Max. Rotational Speed Range(r/min) | 4,001 to 10,000 ～ 10,001 to 78,000 | 2001 to 4,000 | 10,001 to 78,000 | 2001 to 4,000 | - | 4,001 to 10,000 | 10,001 to 78,000 | 10,001 to 78,000 | 4,001 to 10,000 ～ 10,001 to 78,000 | 4,001 to 10,000 ～ 10,001 to 78,000 | 4,001 to 10,000 ～ 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 | 10,001 to 78,000 | 10,001 to 78,000 | 10,001 to 78,000 | 4,001 to 10,000 | 4,001 to 10,000 | 10,001 to 78,000 | 4,001 to 10,000 | 4,001 to 10,000 ～ 10,001 to 78,000 | 4,001 to 10,000 ～ 10,001 to 78,000 | 4,001 to 10,000 | 4,001 to 10,000 ～ 10,001 to 78,000 | 2001 to 4,000 | 2001 to 4,000 | 2001 to 4,000 |
| Feature | Heat Resistant ～ Vibration Insulation | - | No Backlash | Small ～ Vibration Insulation | High Torsional Rigidity ～ No Backlash | Heat Resistant ～ Small | Heat Resistant ～ Small | Heat Resistant ～ Small | Heat Resistant ～ Small | No Backlash | Vibration Insulation | - | - | - | - | High Torque ～ Vibration Insulation | Clean Environment ～ Vacuum Environment | Clean Environment ～ Vacuum Environment | High Accuracy ～ Small | No Backlash ～ Small | No Backlash ～ Small | No Backlash ～ Small | Heat Resistant ～ Small | Heat Resistant ～ Small | High Torque ～ Vibration Insulation | High Durability ～ No Backlash | - | - | - |
| Body Material | Aluminum | - | Aluminum | Alloy | Aluminum | Aluminum | Stainless Steel | Stainless Steel | Aluminum | Resin | Aluminum | - | - | - | - | Aluminum | - | Resin | Aluminum | Stainless Steel | Aluminum | Aluminum | Stainless Steel | Aluminum | Aluminum | Resin | - | - | - |
| Category | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | - | - | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | - | Coupling Main Body | Coupling Main Body | Coupling Main Body | - | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body | Coupling Main Body |
| Allowable Torque(Nm) | 1.3 ～ 2.8 | 1.7 | 2 | 1.275 | 2 | 1.1 ～ 3 | 0.3 ～ 2.1 | 0.3 ～ 2.1 | 0.5 ～ 3 | 1.2 ～ 3 | 1.6 ～ 3 | 1.7 | 1.7 | 1.7 | 2.7 | 1.2 ～ 6 | 2 | 1.5 | 1.6 ～ 2.5 | 1.8 | 1.6 | 2.2 | 0.3 ～ 2.1 | 0.5 ～ 3 | 3 | 1.6 ～ 3 | 1.7 | 1.7 | 2.7 |
| Max. Rotational Speed(r/min) | 4800 ～ 19000 | 3000 | 19000 | 3000 | - | 8500 ～ 10000 | 15000 ～ 20000 | 15000 ～ 28000 | 9000 ～ 12000 | 8000 ～ 12000 | 3000 ～ 8000 | 3000 | 3000 | 3000 | 4000 | 15000 ～ 25000 | 25000 | 17000 | 10000 | 10000 | 22000 | 7500 | 6000 ～ 12000 | 9000 ～ 12000 | 10000 | 8000 ～ 12000 | 3000 | 3000 | 4000 |
| Allowable Lateral Misalignment Range(mm) | 0.02 to 0.2 ～ 0.41 to 1.0 | - | 0.02 to 0.2 | 0.02 to 0.2 | 0.02 to 0.2 | 0.21 to 0.40 ～ 0.41 to 1.0 | - | 0.02 to 0.2 | 0.21 to 0.40 ～ 0.41 to 1.0 | 0.21 to 0.40 ～ 0.41 to 1.0 | 0.02 to 0.2 ～ 1.1 to 3.0 | - | - | - | - | 0.02 to 0.2 | 0.02 to 0.2 | 0.02 to 0.2 | 0.02 to 0.2 ～ 0.41 to 1.0 | 0.02 to 0.2 | 0.02 to 0.2 | 0.02 to 0.2 | 0.02 to 0.2 | 0.02 to 0.2 ～ 0.41 to 1.0 | 0.02 to 0.2 | 0.21 to 0.40 ～ 0.41 to 1.0 | - | - | - |
| Allowable Lateral Misalignment(mm) | 0.15 ～ 0.6 | - | 0.02 | 0.2 | 0.15 | 0.4 | 0 | 0.1 ～ 0.2 | 0.2 ～ 0.3 | 0.4 ～ 0.5 | 0.2 ～ 1.2 | - | - | - | - | 0.2 | 0.15 | 0.05 | 0.06 ～ 0.5 | 0.1 | 0.1 | 0.1 | 0.1 ～ 0.2 | 0.2 ～ 0.3 | 0.15 | 0.4 ～ 0.6 | - | - | - |
| Allowable Angular Misalignment(deg) | 2 ～ 5 | - | 1 | 1 | 2 | 3 | 1 | 2.5 | 3 | 4 ～ 5 | 2 ～ 3 | - | - | - | 0 | 1 | 1 ～ 2 | 0.5 | 1.3 ～ 6 | 1.5 | 1.5 | 1.5 | 2.5 | 3 | 1.5 | 4 ～ 5 | - | - | 0 |
| Buffer Part Material | - | - | - | Polyurethane | - | Aluminum Bronze / Others | Polyacetal / Aluminum Bronze | Polyacetal / Aluminum Bronze | Aluminum Bronze / Others | - | Fluororubber | - | - | - | - | - | - | - | - | - | - | - | Polyacetal / Aluminum Bronze | Aluminum Bronze / Others | Others | - | - | - | - |
| Disc Part Material | Stainless Steel / Polyimide / Carbon Fiber | - | Stainless Steel | - | - | Stainless Steel | - | - | Stainless Steel | Glass Fiber Reinforced Resin | - | - | - | - | - | - | - | - | - | - | - | - | - | Stainless Steel | - | Glass Fiber Reinforced Resin / Polyacetal | - | - | - |
| Bellows Part Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Others | - | - | - | - | - | - | - | - | - | - |
![Slit Type Coupling - Set Screw Type [SAA1521]](http://uk.misumi-ec.com/linked/material/mech/LNK1/PHOTO/20056.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Allowable Misalignment
-
Not Provided -
Angular Misalignment -
Eccentricity -
Axial Misalignment
-
-
Application
- Standard
- Servo Motor
- Stepping Motor
- Encoder
-
Allowable Torque Range(N•m)
-
Shaft Bore Dia. (machined) D1(mm)
- 1
- 1.5
- 2
- 2.5
- 3
- 3.17
- 3.2
- 3.5
- 4
- 4.5
- 4.76
- 5
- 5.5
- 6
- 6.35
- 7
- 7.93
- 8
- 8.5
- 9
- 9.5
- 9.52
- 9.525
- 9.53
- 10
- 11
- 12
- 12.7
- 13
- 14
- 14.5
- 15
- 15.875
- 16
- 17
- 18
- 18.5
- 19
- 20
- 20.5
- 21
- 22
- 23
- 23.5
- 24
- 25
- 25.4
- 26
- 27
- 28
- 28.5
- 29
- 30
- 30.5
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 50
- 52
- 55
- 56
- 58
- 60
- 0635
- 09525
[3-16/1mm Unit(s)]
-
Shaft Bore Dia. (machined) D2(mm)
- 1
- 1.5
- 2
- 2.4
- 2.5
- 3
- 3.17
- 3.2
- 3.5
- 4
- 4.5
- 4.76
- 5
- 5.5
- 6
- 6.35
- 7
- 7.93
- 8
- 8.5
- 9
- 9.252
- 9.5
- 9.52
- 9.525
- 9.53
- 10
- 11
- 12
- K 12
- 12.7
- 13
- 14
- K 14
- 14.5
- 15
- 15.875
- 16
- K 16
- 17
- 18
- K 18
- 18.5
- 19
- 20
- K 20
- 21
- 22
- K 22
- 23
- 23.5
- 24
- 25
- 25.4
- 26
- 27
- 28
- 28.5
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 48
- 50
- 52
- 55
- 56
- 58
- 60
[3-16/1mm Unit(s)]
-
Outer Dia. A(mm)
- 6
- 6.4
- 6.5
- 8
- 9
- 9.5
- 10
- 12
- 12.7
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 15.9
- 16
- 16.1
- 16.5
- 16.6
- 16.8
- 17
- 17.5
- 18
- 19
- 19.1
- 19.5
- 20
- 21
- 22
- 22.2
- 24
- 24.5
- 25
- 25.4
- 25.5
- 26
- 26.2
- 26.5
- 26.6
- 27
- 27.3
- 28
- 29
- 30
- 31.7
- 31.8
- 32
- 32.5
- 33.3
- 34
- 34.4
- 35
- 36
- 38
- 39
- 39.5
- 40
- 40.5
- 41.0
- 41.3
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 47
- 48
- 49
- 50
- 53
- 53.6
- 54
- 54.5
- 55
- 56
- 57
- 58
- 60
- 62
- 63
- 64
- 64.5
- 65
- 66
- 66.5
- 67
- 68
- 69
- 69.9
- 70
- 73
- 74.5
- 75
- 77
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 87
- 88
- 90
- 93
- 94
- 94.5
- 95
- 99
- 100
- 102
- 104
- 104.5
- 105
- 109
- 110
- 112
- 115
- 117
- 118
- 119
- 120
- 122
- 125
- 126
- 129
- 135
- 136.5
- 138
- 140
- 143
- 144
- 150
- 152
- 155
- 157
- 160
- 161
- 168
- 169
- 170
- 175
- 178
- 185
- 190
- 194
- 200
- 208
- 210
- 214
- 215
- 225
- 246
- 255
- 260
- 262
- 276
- 285
- 290
- 308
- 320
- 346
- 370
- 420
-
Overall Length W(mm)
- 5.1
- 7.3
- 8.4
- 9
- 9.4
- 9.6
- 10
- 10.2
- 10.4
- 10.5
- 11.2
- 11.4
- 11.8
- 12
- 12.35
- 12.4
- 12.7
- 13
- 13.2
- 13.5
- 14
- 14.05
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 14.9
- 15
- 15.5
- 15.6
- 15.7
- 15.8
- 15.9
- 16
- 16.2
- 16.5
- 16.6
- 16.7
- 17
- 17.4
- 17.6
- 17.8
- 18
- 18.1
- 18.4
- 18.5
- 18.7
- 18.8
- 19
- 19.1
- 19.3
- 19.35
- 19.4
- 19.6
- 19.7
- 19.8
- 20
- 20.2
- 20.4
- 20.5
- 20.6
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 22
- 22.1
- 22.2
- 22.5
- 23
- 23.1
- 23.15
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.9
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.9
- 25
- 25.4
- 25.5
- 25.6
- 25.7
- 25.9
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 27
- 27.2
- 27.3
- 27.4
- 27.6
- 28
- 28.2
- 28.4
- 28.5
- 29
- 29.5
- 29.8
- 30
- 30.2
- 30.4
- 30.5
- 30.8
- 31
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 32
- 32.2
- 32.3
- 32.5
- 32.6
- 32.7
- 32.8
- 33
- 33.3
- 33.5
- 33.8
- 34
- 34.4
- 34.5
- 35
- 35.3
- 35.6
- 36
- 36.5
- 36.8
- 37
- 37.2
- 37.4
- 37.5
- 37.8
- 38
- 38.2
- 38.5
- 38.6
- 39
- 39.2
- 39.4
- 39.5
- 39.7
- 40
- 40.1
- 40.5
- 41
- 41.8
- 42
- 42.3
- 43
- 43.2
- 43.4
- 43.5
- 43.6
- 44
- 44.2
- 44.5
- 44.7
- 44.8
- 45
- 45.2
- 45.6
- 46
- 46.2
- 46.6
- 47
- 47.1
- 47.6
- 48
- 48.4
- 49
- 49.2
- 49.4
- 49.7
- 50
- 50.2
- 50.6
- 50.8
- 51
- 51.2
- 51.3
- 52
- 52.5
- 52.8
- 53
- 53.2
- 53.4
- 53.6
- 54
- 54.1
- 54.3
- 54.4
- 54.5
- 54.6
- 55
- 55.5
- 56
- 56.2
- 56.5
- 56.6
- 57
- 58
- 58.2
- 58.3
- 58.5
- 58.6
- 59.3
- 59.7
- 59.8
- 59.9
- 60
- 60.4
- 60.5
- 60.6
- 60.8
- 61
- 61.2
- 62
- 63
- 63.3
- 63.4
- 63.5
- 63.6
- 63.7
- 63.8
- 64
- 64.8
- 65
- 65.6
- 66
- 66.6
- 66.8
- 67
- 67.1
- 67.5
- 68
- 68.3
- 68.5
- 68.6
- 68.7
- 68.8
- 69
- 69.5
- 69.6
- 69.8
- 70
- 70.5
- 70.6
- 70.7
- 71
- 71.2
- 71.4
- 72
- 72.1
- 72.4
- 73
- 73.3
- 74
- 74.4
- 74.8
- 75
- 75.6
- 75.8
- 76
- 76.2
- 77
- 77.6
- 77.8
- 78
- 78.3
- 78.8
- 79
- 79.5
- 79.8
- 80
- 80.8
- 81
- 82
- 82.5
- 82.6
- 82.8
- 83
- 83.6
- 84
- 84.7
- 85
- 85.2
- 85.5
- 85.6
- 86
- 87.2
- 88
- 89
- 89.3
- 89.5
- 89.6
- 89.8
- 90
- 90.3
- 90.5
- 90.8
- 91
- 92
- 93
- 93.6
- 94
- 95
- 95.6
- 96
- 96.2
- 97
- 97.2
- 98
- 98.5
- 98.6
- 99
- 99.2
- 99.6
- 100
- 100.2
- 101
- 101.6
- 102
- 102.5
- 103
- 104
- 104.4
- 105
- 105.8
- 106
- 107
- 107.6
- 108
- 109
- 110
- 111
- 112
- 112.8
- 113
- 114
- 114.2
- 115
- 115.6
- 116
- 116.5
- 117
- 117.6
- 118
- 118.4
- 119.6
- 120
- 120.8
- 121
- 123
- 123.6
- 124
- 125
- 126
- 126.5
- 127
- 128
- 129
- 129.6
- 130
- 131
- 133
- 136
- 136.4
- 137.6
- 138
- 140
- 140.2
- 141
- 142
- 144
- 144.2
- 146
- 147
- 150
- 150.6
- 153.0
- 154
- 154.6
- 156.4
- 158
- 160
- 162
- 164
- 164.6
- 168
- 170
- 170.6
- 176
- 178.4
- 182.8
- 192.4
- 193
- 195
- 200
- 206
- 208.8
- 209.2
- 216
- 217
- 218
- 223
- 238
- 241.2
- 249.4
- 260
- 286.8
- 290
- 307
- 335
- 337.2
- 377
- 391
- 421
- 607
-
Max. Rotational Speed Range(r/min)
-
Feature
-
Body Material
-
Category
- Coupling Main Body
- Maintenance Components
-
Allowable Torque(Nm)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
-
Buffer Part Material
-
Disc Part Material
-
Bellows Part Material
Brand
-
- NABEYA BI-TECH (26)
- SUNGIL (20)
- MAEDLER (8)
- MIKI PULLEY (8)
- ADVANCED (7)
- R+W (5)
- ABP ANTRIEBSTECHNIK (4)
- LINK (4)
- MIGHTY (4)
- NIHON MINIATURE (3)
- SAKAI MANUFACTURING (2)
- KAYSEVEN (1)
- KOYO ELECTRONICS INDUSTRIES (1)
- ORIENTAL MOTOR (1)
- GANTER (0)
- KBK (0)
- SCH (0)
- KTR SYSTEMS (0)
- ISEL (0)
- FESTO (0)
- IFM ELECTRONIC (0)
- NORELEM (0)
- KIPP (0)
- MITSUBOSHI BELTING (0)
- VMA (0)
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
Examples how you can use these components
Categories related to Shaft Couplings
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.