Helical Gear（Twisting Direction：Right）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Ground Helical Gear KHG
KOHARA GEAR INDUSTRY
Thermally refined SCM440 material, with induction hardened tooth surface, before hole standard ground precision JISN6 high strength grade, excellent wear-resistance ground helical gear. Adopting the axis-perpendicular module, the assembly distance can be easily calculated like a spur gear, and replacement with a spur gear of the same specification is possible.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 60.19 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Helical Gear m1 S45C Type
KYOUIKU GEAR MFG
Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 14.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Helical Gear
KOHARA GEAR INDUSTRY
Meshing ratio is large compared with spur gear, for smooth engagement, effective for noise and vibration control.- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 17.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Screw Gear AN
KOHARA GEAR INDUSTRY
Uses aluminum bronze as a material, for very tough sliding gear, with excellent wear resistance. Spiral gears are prone to wear and galling, so different combinations of materials are recommended.- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 29.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Helical Gear m1 POM White (Polyacetal) Type
KYOUIKU GEAR MFG
Polyacetal helical gear with lower water absorption than nylon gear, and excellent dimensional stability. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.- 2D CAD data available
› Configure nowStarting from∗ ： 23.02 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear m2.5 S45C Type
KYOUIKU GEAR MFG
Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (cross axis).- 2D CAD data available
› Configure nowStarting from∗ ： 31.89 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Screw Gear SN
KOHARA GEAR INDUSTRY
Spiral gears have crossed axes (R & R, L & L) and parallel axes (R & L), depending on combinations of screw direction. Pay attention to axial direction and rotational direction.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 10.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Helical Gear m1 Blue (Polyacetal)
KYOUIKU GEAR MFG
Ideal for preventing contamination in food/packaging equipment, as the blue color of the POM stands out against food ingredients.› Configure nowStarting from∗ ： 12.84 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear m2.5 Blue (Polyacetal)
KYOUIKU GEAR MFG
Ideal for preventing contamination in food/packaging equipment, as the blue color of the POM stands out against food ingredients.› Configure nowStarting from∗ ： 101.96 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear m1 SUS304 Type
KYOUIKU GEAR MFG
Helical gear made from SUS304 for excellent corrosion resistance. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.- 2D CAD data available
› Configure nowStarting from∗ ： 36.80 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear m1.5 SUS304 Type
KYOUIKU GEAR MFG
Helical gear made from SUS304 for excellent corrosion resistance. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.- 2D CAD data available
› Configure nowStarting from∗ ： 52.15 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear ES
AOKI SEIMITSU KOGYO
Allowable torque is larger than that of a spur gear of the same size, and tooth contact sound is also quiet.› Configure nowStarting from∗ ： 14.60 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Gear IS
AOKI SEIMITSU KOGYO
[Features] This gear is commonly used for changing the direction of a rotating shaft. [Features] Material: EN 1.1191 Equiv. (JIS G 4051) Tooth profile, accuracy: Solid teeth, class JISN8 (formerly class JIS4) Pressure angle: 20° Helix angle: 45°. Surface treatment: Black oxide coating. Surface finish of the tooth: Cutting. Bore diameter tolerance: JIS H7 class.› Configure nowStarting from∗ ： 11.47 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Stainless Steel Screw Gear
KOHARA GEAR INDUSTRY
Stainless steel spiral gears are prone to wear and galling, so different combinations of materials are recommended.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 23.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Helical Gear m1.5 POM White (Polyacetal) Type
KYOUIKU GEAR MFG
Polyacetal helical gear with lower water absorption than nylon gear, and excellent dimensional stability. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.- 2D CAD data available
› Configure nowStarting from∗ ： 22.10 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear m3 S45C Type
KYOUIKU GEAR MFG
Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (cross axis).- 2D CAD data available
› Configure nowStarting from∗ ： 37.83 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear m2 S45C Type
KYOUIKU GEAR MFG
Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (cross axis).- 2D CAD data available
› Configure nowStarting from∗ ： 23.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Plastic Screw Gear
KOHARA GEAR INDUSTRY
Employing lightweight MC901 material, this screw gear can even be used without lubrication. Prone to wear and galling, so different combinations of materials are recommended.- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 16.62 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Helical Gear m1.5 Blue (Polyacetal)
KYOUIKU GEAR MFG
Ideal for preventing contamination in food/packaging equipment, as the blue color of the POM stands out against food ingredients.› Configure nowStarting from∗ ： 16.28 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Helical Gear m2 Blue (Polyacetal)
KYOUIKU GEAR MFG
Ideal for preventing contamination in food/packaging equipment, as the blue color of the POM stands out against food ingredients.› Configure nowStarting from∗ ： 25.72 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Module |
| Number of Teeth(Teeth) |
| Material(mm) |
| Twisting Direction |
| Heat Treatment(φ) |
| Ground Tooth |
| Surface Treatment |
| Shaft Bore Config. |
| Shaft Bore Dia., Shaft Dia. |
| Face Width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG | KYOUIKU GEAR MFG | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG | KYOUIKU GEAR MFG | KYOUIKU GEAR MFG | KYOUIKU GEAR MFG | AOKI SEIMITSU KOGYO | AOKI SEIMITSU KOGYO | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG | KYOUIKU GEAR MFG | KYOUIKU GEAR MFG | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG | KYOUIKU GEAR MFG |
| Product Series | ||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Starting from∗ | 60.19 € *Unit price with basic configuration Volume Discount | 14.11 € *Unit price with basic configuration Volume Discount | 17.30 € *Unit price with basic configuration | 29.19 € *Unit price with basic configuration | 23.02 € *Unit price with basic configuration | 31.89 € *Unit price with basic configuration | 10.50 € *Unit price with basic configuration Volume Discount | 12.84 € *Unit price with basic configuration | 101.96 € *Unit price with basic configuration | 36.80 € *Unit price with basic configuration | 52.15 € *Unit price with basic configuration | 14.60 € *Unit price with basic configuration | 11.47 € *Unit price with basic configuration | 23.03 € *Unit price with basic configuration Volume Discount | 22.10 € *Unit price with basic configuration | 37.83 € *Unit price with basic configuration | 23.92 € *Unit price with basic configuration | 16.62 € *Unit price with basic configuration | 16.28 € *Unit price with basic configuration | 25.72 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | 5 Days | 6 Days | 7 Days | 7 Days | 5 Days | 7 Days | 7 Days | 7 Days | 7 Days | Same day | 8 Days | 5 Days | 7 Days | 7 Days | 5 Days | Same day | 7 Days | 7 Days |
| Module | 1 ～ 3 | 1 ～ 1.5 | 2 ～ 3 | 1 ～ 2 | 1 | 2.5 | 1 ～ 4 | 1 | 2.5 | 1 | 1.5 | 1.5 ～ 4 | 1 ～ 4 | 1 ～ 3 | 1.5 | 3 | 2 | 1.5 ～ 3 | 1.5 | 2 |
| Number of Teeth(Teeth) | 15 ～ 100 | 13 ～ 26 | 15 ～ 90 | 10 ～ 15 | 26 | 13 ～ 26 | 10 ～ 30 | 10 ～ 26 | 26 | 13 ～ 26 | 13 ～ 26 | 15 ～ 40 | 10 ～ 36 | 10 ～ 20 | 13 | 13 | 13 ～ 26 | 10 ～ 20 | 10 ～ 26 | 10 ～ 26 |
| Material(mm) | General Steel Material | General Steel Material | General Steel Material | Brass | Resin | General Steel Material | General Steel Material | Resin | Resin | Stainless Steel | Stainless Steel | General Steel Material | General Steel Material | Stainless Steel | Resin | General Steel Material | General Steel Material | Resin | Resin | Resin |
| Twisting Direction | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right |
| Heat Treatment(φ) | Thermal Refined, Induction Hardened | Not Provided / High Frequency | Not Provided | Not Provided | Not Provided | High Frequency | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | High Frequency | High Frequency | Not Provided | Not Provided | Not Provided |
| Ground Tooth | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Surface Treatment | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Shaft Bore Config. | Round Hole / Round hole+tap / Keyway + Tap | Round Hole / Round hole+tap | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole / Round hole+tap / Keyway + Tap | Round Hole | Round Hole | Round Hole | Round Hole / Round hole+tap | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole |
| Shaft Bore Dia., Shaft Dia. | 8 ～ 30 | 8 ～ 10 | 12 ～ 20 | 6 ～ 12 | 10 | 14 ～ 18 | 6 ～ 20 | ø4 ～ ø8 | ø16 | 8 ～ 10 | 10 ～ 12 | 10 ～ 25 | 10 ～ 20 | 6 ～ 20 | 10 | 16 | 12 ～ 16 | 6 ～ 15 | ø6 ～ ø10 | ø10 ～ ø12 |
| Face Width(mm) | 8 ～ 25 | 12 ～ 15 | 25 ～ 35 | 10 ～ 20 | 12 | 22 | 10 ～ 30 | 12 | 22 | 12 | 15 | 15 ～ 32 | 10 ～ 32 | 10 ～ 25 | 15 | 25 | 20 | 15 ～ 25 | 15 | 20 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Module
-
Number of Teeth(Teeth)
-
Material(mm)
- General Steel Material
- Stainless Steel
- Resin
- Brass
-
Twisting Direction
- Right
- Left
-
Heat Treatment(φ)
- Not Provided
- High Frequency
- Thermal Refined, Induction Hardened
-
Ground Tooth
- Provided
- Not Provided
-
Surface Treatment
- Not Provided
- Black Oxide
-
Shaft Bore Config.
-
Round Hole -
Round hole+tap -
Keyway + Tap
-
-
Shaft Bore Dia., Shaft Dia.
-
Face Width(mm)
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.