Insert（Sales Unit：Low Quantity (Available beginning with 1 pc.)）

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Nitronics 60

  RECOIL

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)

  TOKAI METAL INDUSTRY

  A general-purpose well-balanced screw insert with low cost.
  [Features]
  ・ At the time of press-fit, the product has direction.
  ・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)

  TOKAI METAL INDUSTRY

  These inserts are the best choice for easy and secure fitment into plastic holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Recoil-Free (mm) SUS304

  RECOIL

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Thread Inserts / Tangless

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Techlock (SL)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
  [L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
  [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Bit Insert (Flanged) / HFB

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.47 €
  Min. Shipping Days ：	19 Days

  *Unit price with basic configuration

• 

  Thread Insert Installation Tool

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	91.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tangless Inserts Installation / Removal Tools

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	164.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Thread Insert Removal Tool

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Self-Tapping Inserts Installation Tool

  MISUMI

  Compatible thread inserts are M3, 4, 5, 6, 8, 10 and 12.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	100.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  E-Certs

  TSUGAMI

  Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert, Inconel X-750

  RECOIL

  The color of the main body will become silver when the method of heat treatment changes.
  
  Not plated. (Inconel Black Recoil)
  An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
  
  [Features]
  · Nickel alloy.
  · For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flat Head Sonic Lock (Type SHK)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  E-SERT P Type Insertion Tool

  TSUGAMI

  A general purpose insertion tool that can be used by beginners to perform simple insertion. Available in sizes of M 2.5 mm or larger for coarse and fine threads. Sizes below 8 mm are available for standard thread inserts and locks.

  Select to compare

  Configure now
  Starting from∗ ：	64.67 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Sprue

  NIPPON SPREW

  Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Lock Recoil (Millimeter) SUS304

  RECOIL

  Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Insert Phosphor Bronze

  RECOIL

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Tangless Insert

  RECOIL

  The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Ultra Coarse Outside Screw, Type 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat Expanded Slot Type, Model 302, Inch Type

  KKV

  [Features]
  · Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
  · The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
  · If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
  
  [Materials]
  SUM22L free-cutting steel (equivalent), hexavalent chromate

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Sprue (Unify) (UNF)

  NIPPON SPREW

  Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.09 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Recoil-Free (mm) SUS304

  RECOIL

  The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Sparrow (Type SP)

  JAPAN DRIVE-IT

  [Type] Press Fit Use
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
  [L](D = screw diameter M) 1D 1.5D 2D
  [Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.31 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Brass Bit Insert (Standard, One Sided) / HSB

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Taps for Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Thread Insert Tang Breaking Tool

  MISUMI

  Compatible thread inserts range from M2 to M18.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Sprue (Unified) (UNC)

  NIPPON SPREW

  Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lock Sprue

  NIPPON SPREW

  This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.93 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Dodge Insert Flange Type (Brass Cadmium-Less)

  TOKAI METAL INDUSTRY

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Trade Series Recoil Kit (Milli)

  RECOIL

  Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	98.10 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Trade Series Recoil Kit (UNC)

  RECOIL

  Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
  
  [Features]
  · A male screw repair kit for individual recoils that is widely used throughout the world in repair associated with industrial machinery, automobiles, and motorcycles.
  · The following parts are included in the red plastic box.
  · Drill for bottom hole (M12-1 / 2 or less), recoil tap #2 (HSS), recoil (length 1.5D), insertion tool (M12-1 / 2 or less, and includes tap handle), extraction tool with magnet (M12-1 / 2 or less).
  · The spark plug kit includes a pilot tap.
  · The pilot tap does not use a drill

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	60.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Trade Series Recoil Kit (UNF)

  RECOIL

  Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	91.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Recoil Tap

  RECOIL

  [Features]
  · Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
  · Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
  · In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
  · Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
  · Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Recoil-Free Specialized Size

  RECOIL

  Recoil, threaded insert, non-recoil special size. [Thread type]Coarse. " Material: EN 1.4301 Equiv. (sintered)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Recoil-Free (UNC) SUS304

  RECOIL

  The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Insert SUS316

  RECOIL

  An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.49 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Chip-Free / Short, Type 337

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screwsert (Type SCT)

  JAPAN DRIVE-IT

  [Type] Self-tapping Used
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
  [L](D = screw diameter M) 2D 2.5D
  [Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...