Insert（Screw Type：Metric (Coarse) Thread）

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  A general-purpose well-balanced screw insert with low cost.
  [Features]
  ・ At the time of press-fit, the product has direction.
  ・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  › Configure now
  Starting from∗ ：	0.39 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type / IRU

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	0.69 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  These inserts are the best choice for easy and secure fitment into plastic holes.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Nitronics 60

  RECOIL

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Techlock (SL)【1-5,000 Pieces Per Package】

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
  [L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
  [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.22 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Inserts / Tangless

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.93 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	1.06 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	1.06 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Tangless Insert Metric Coarse

  ACCURATE

  An insert with no tang that does not require folding to remove. A product that eliminates the time and cost required to perform the insertion operation that would otherwise be needed when tangs are present.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Insert Metric Coarse Locking

  ACCURATE

  A tangless insert with a function that prevents loosening. The center of this material is hexagonal shaped to prevent loosening.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  • Volume Discount

  • Stock

  Select to compare

  › Configure now
  Starting from∗ ：	0.28 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Bit Insert (Flanged) / HFB

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	0.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dodge Bit Insert Standard SD (Brass Cadmium-Less)【1-2,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.39 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

  RECOIL

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  • Volume Discount

  • Stock

  Select to compare

  › Configure now
  Starting from∗ ：	0.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Ultra Coarse Outside Screw, Type 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Chip-Free / Long, Type 338

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.87 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Ultrasert IV / HUD IV

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.6/3/4/5/6/8/10
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	0.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Insert

  RECOIL

  The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.47 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Chip-Free / Short, Type 337

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.87 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)【1-15,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Recoil Packet (mm)【5-10 Pieces Per Package】

  RECOIL

  [Type] Threaded Insert Use
  [Application] Light Metal
  [Materials] SUS304 with Notch
  [Application] Light Metal
  [Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
  [L](D = screw diameter M) 1D 1.5D 2D
  [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
  [Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	5.81 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	0.92 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  C Lock (CL Type)【100 Pieces Per Package】

  BOHSEI

  The outer knurled form is reversed, which allows for high tensile strength and torque strength.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	10.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Insert, Inconel X-750

  RECOIL

  The color of the main body will become silver when the method of heat treatment changes.
  
  Not plated. (Inconel Black Recoil)
  An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
  
  [Features]
  · Nickel alloy.
  · For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	18.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tool for Inserts Manual Processing 610-Type

  KKV

  A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6

  • Volume Discount

  • Stock

  Select to compare

  › Configure now
  Starting from∗ ：	68.11 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel Tangless Insert

  SUNCO

  [Nominal M] 2, 2.5, 2.6, 3, 4, 5, 6, , 8, 10, 12, 16, 20
  [Material] Stainless Steel
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Insert Nut (Screw-In Type) IRB / IRB-C

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	0.47 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  C-Lock (HCL Type)【50-100 Pieces Per Package】

  BOHSEI

  Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.

  Select to compare

  › Configure now
  Starting from∗ ：	10.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Sparrow (Type SP)

  JAPAN DRIVE-IT

  [Type] Press Fit Use
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
  [L](D = screw diameter M) 1D 1.5D 2D
  [Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Insert Metric Coarse Phosphor Bronze

  ACCURATE

  We recommend using this on anti-magnetic works or locations.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.53 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	0.59 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Bit Insert (Standard, Both Faces) / HSB-Z

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  › Configure now
  Starting from∗ ：	0.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Insert (Box)【100 Pieces Per Package】

  MISUMI

  For your own stock or for a large number of uses, buying per box is beneficial.

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	46.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Self Floating Fastener【1-1,000 Pieces Per Package】

  SEL JAPAN

  Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.48 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】

  TOKAI METAL INDUSTRY

  Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.44 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Iron, Ensat, Small Outside Diameter Slotted Type 303

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.54 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass, Ensat, Screw Plastic Deformation, Type 305

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat Head Sonic Lock (Type SHK)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Heat Lock (Type HL)【1-1,000 Pieces Per Package】

  JAPAN DRIVE-IT

  · Type: Press fit use
  · Application: Resin, general
  · Material: Brass
  · Thread ridge type: Metric coarse screw, without notch
  · Shape: Standard
  · Diameter (following insertion): M3, M3.5, M4, M5, M6
  · Length following insertion (D = screw diameter M): 1.5D, 2D
  · Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Screwsert (Type SCT)

  JAPAN DRIVE-IT

  [Type] Self-tapping Used
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
  [L](D = screw diameter M) 2D 2.5D
  [Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...