Thread Inserts（Shape：Slotted）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Self-Tapping Inserts / Slotted
MISUMI
It is a split groove threaded insert, threaded on both the inner and outer diameters.
Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ensat, Slotted Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
- Stock
Configure nowStarting from∗ ： 0.48 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromate- Volume Discount
Configure nowStarting from∗ ： 0.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingConfigure nowStarting from∗ ： 1.34 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] DegreasingConfigure nowStarting from∗ ： 1.70 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingConfigure nowStarting from∗ ： 0.78 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
HIROSUGI-KEIKI
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasingConfigure nowStarting from∗ ： 1.17 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Stainless Steel E-Sert (Unify) (UNC)【1-100 Pieces Per Package】
SUNCO
[Nominal]
[Material] Stainless Steel
[Surface Processing] Bare- Volume Discount
Configure nowStarting from∗ ： 0.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Application |
| Material |
| Screw Type |
| Screw Dia. M (after insertion)(mm) |
| Thread Dia. (After inserted), Unified(inch) |
| Length L (after insertion) (D = Thread Dia. M) |
| Notch |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
| |
| Brand | MISUMI | KKV | KKV | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | HIROSUGI-KEIKI | SUNCO |
| Product Series | Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S | Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW | Stainless Steel E-Sert (Unify) (UNC)【1-100 Pieces Per Package】 | |||||
| CAD |
| |||||||
| Starting from∗ | 1.20 € *Unit price with basic configuration Volume Discount | 0.48 € *Unit price with basic configuration Volume Discount | 0.89 € *Unit price with basic configuration Volume Discount | 1.34 € *Unit price with basic configuration | 1.70 € *Unit price with basic configuration | 0.78 € *Unit price with basic configuration | 1.17 € *Unit price with basic configuration | 0.89 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | 6 Days | 12 Days | 12 Days | Same day | 12 Days | 6 Days |
| Specifications |
| |||||||
| Type | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Self-Tapping | Standard |
| Application | Light Metal | - | - | Cast Iron | Cast Iron | Light Metal | Light Metal | - |
| Material | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / Brass | Steel | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Brass | Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread / Unified (Fine) Thread / BSW (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread |
| Screw Dia. M (after insertion)(mm) | 3 ～ 12 | 2.5 ～ 30 | - | 2.6 ～ 8 | 2.6 ～ 8 | 2.6 ～ 8 | 2.6 ～ 8 | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | 1/2 ～ No. 10 | - | - | - | - | 1/2-13 ～ #10-24 |
| Length L (after insertion) (D = Thread Dia. M) | - | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D |
| Notch | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided |
| Shape | Slotted | Slotted | Slotted | Slotted | Slotted | Slotted | Slotted | Slotted |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Application
- Light Metal
- Cast Iron
- Resin General
-
Material
- Steel
- Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)
- Stainless (EN 1.4401 Equiv.)
- Stainless Steel (EN 1.4016 Equiv.)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
- Stainless steel
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Screw Dia. M (after insertion)(mm)
-
Thread Dia. (After inserted), Unified(inch)
-
Length L (after insertion) (D = Thread Dia. M)
-
Notch
-
Shape
-
Sales Unit
Brand
-
- HIROSUGI-KEIKI (4)
- KKV (2)
- SUNCO (1)
- NIPPON SPREW (0)
- ACCURATE (0)
- TSUGAMI (0)
- SEL JAPAN (0)
- KS SANGYO (0)
- KIPP (0)
- BOHSEI (0)
- GANTER (0)
- TOKAI METAL INDUSTRY (0)
- ESCO (0)
- REYHER (0)
- RECOIL (0)
- JAPAN DRIVE-IT (0)
CAD data type
-
- 2D
- 3D
Categories related to Thread Inserts
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.