• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable

Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable

Click on this image to zoom in.

Click on this image to zoom in.

  • Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable
  • Ejector pins / cylindrical head / EN 1.3343 Equiv. / gas venting / dimensions Configurable

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
GW-EPHJ-L4-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJ-L4.5-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJ-L5-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJ-L5.5-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJ-L6-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJ-L6.5-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJ-L7-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJB4-[60-300/0.01]-P[3.5-3.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJB4.5-[60-350/0.01]-P[4-4.49/0.01]-E[0.02-0.05/0.01]
GW-EPHJB5-[60-350/0.01]-P[4.5-4.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJB5.5-[60-350/0.01]-P[5-5.49/0.01]-E[0.02-0.05/0.01]
GW-EPHJB6-[60-350/0.01]-P[5.5-5.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJB6.5-[60-350/0.01]-P[6-6.49/0.01]-E[0.02-0.05/0.01]
GW-EPHJB7-[60-350/0.01]-P[6.5-6.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJBE4-[60-350/0.01]-P[3.5-3.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJBE4.5-[60-350/0.01]-P[4-4.49/0.01]-E[0.02-0.05/0.01]
GW-EPHJBE5-[60-350/0.01]-P[4.5-4.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJBE5.5-[60-350/0.01]-P[5-5.49/0.01]-E[0.02-0.05/0.01]
GW-EPHJBE6-[60-350/0.01]-P[5.5-5.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJBE6.5-[60-350/0.01]-P[6-6.49/0.01]-E[0.02-0.05/0.01]
GW-EPHJBE7-[60-350/0.01]-P[6.5-6.99/0.01]-E[0.02-0.05/0.01]
GW-EPHJE-L4-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJE-L4.5-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJE-L5-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJE-L5.5-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJE-L6-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJE-L6.5-[60-350/0.01]-E[0.02-0.05/0.01]
GW-EPHJE-L7-[60-350/0.01]-E[0.02-0.05/0.01]
GWS-EPHJ-L4-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L4.5-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L5.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L6-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L6.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJ-L7-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB4-[60-350/0.01]-P[3.5-3.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB4.5-[60-350/0.01]-P[4-4.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB5-[60-350/0.01]-P[4.5-4.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB5.5-[60-350/0.01]-P[5-5.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB6-[60-350/0.01]-P[5.5-5.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB6.5-[60-350/0.01]-P[6-6.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJB7-[60-350/0.01]-P[6.5-6.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJBE4-[60-350/0.01]-P[3.5-3.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJBE4.5-[60-350/0.01]-P[4-4.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJBE5-[60-350/0.01]-P[4.5-4.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJBE5.5-[60-350/0.01]-P[5-5.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJBE6-[60-350/0.01]-P[5.5-5.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJBE6.5-[60-350/0.01]-P[6-6.49/0.01]-E[0.03-0.05/0.01]
GWS-EPHJBE7-[60-350/0.01]-P[6.5-6.99/0.01]-E[0.03-0.05/0.01]
GWS-EPHJE-L4-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPHJE-L4.5-[60-300/0.01]-E[0.03-0.05/0.01]
GWS-EPHJE-L5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJE-L5.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJE-L6-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJE-L6.5-[60-350/0.01]-E[0.03-0.05/0.01]
GWS-EPHJE-L7-[60-350/0.01]-E[0.03-0.05/0.01]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShaft diameter tolerance (Reference tolerance) L dimension tolerance (Reference tolerance) Head thickness D/P (Shaft diameter)
(mm) 		Gas release shape No. (Nominal diameter)
(mm) 		L (L dimension)
(mm) 		E
(mm)
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4.5Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5.5Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6.5Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)7Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)3.5 ～ 3.99Single flat cutting460 ～ 3000.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4 ～ 4.49Single flat cutting4.560 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4.5 ～ 4.99Single flat cutting560 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5 ～ 5.49Single flat cutting5.560 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5.5 ～ 5.99Single flat cutting660 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6 ～ 6.49Single flat cutting6.560 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6.5 ～ 6.99Single flat cutting760 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)3.5 ～ 3.99Single flat cutting460 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4 ～ 4.49Single flat cutting4.560 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4.5 ～ 4.99Single flat cutting560 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5 ～ 5.49Single flat cutting5.560 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5.5 ～ 5.99Single flat cutting660 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6 ～ 6.49Single flat cutting6.560 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6.5 ～ 6.99Single flat cutting760 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4.5Single flat cutting-40 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5.5Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6.5Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)7Single flat cutting-60 ～ 3500.02 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4Four flats cutting-60 ～ 3000.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4.5Four flats cutting-60 ～ 3000.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5.5Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6.5Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)7Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)3.5 ～ 3.99Four flats cutting460 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4 ～ 4.49Four flats cutting4.560 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)4.5 ～ 4.99Four flats cutting560 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5 ～ 5.49Four flats cutting5.560 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)5.5 ～ 5.99Four flats cutting660 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6 ～ 6.49Four flats cutting6.560 ～ 3500.03 ～ 0.05
1 Quote 100/-0.005+0.02/0 or +0.05/06mm(JIS)6.5 ～ 6.99Four flats cutting760 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)3.5 ～ 3.99Four flats cutting460 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4 ～ 4.49Four flats cutting4.560 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4.5 ～ 4.99Four flats cutting560 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5 ～ 5.49Four flats cutting5.560 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5.5 ～ 5.99Four flats cutting660 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6 ～ 6.49Four flats cutting6.560 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6.5 ～ 6.99Four flats cutting760 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4Four flats cutting-60 ～ 3000.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)4.5Four flats cutting-60 ～ 3000.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)5.5Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)6.5Four flats cutting-60 ～ 3500.03 ～ 0.05
1 Quote 10-0.01/-0.02+0.02/0 or +0.05/06mm(JIS)7Four flats cutting-60 ～ 3500.03 ～ 0.05

Loading...

  1. 1
 

Basic information

Shape type Gas release Material EN 1.3343 Equiv. Surface treatment No
Tip shape No Character engraving type No Number of engraving characters No

Configure

Clear all

56Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shaft diameter tolerance (Reference tolerance)

    • -0.01/-0.02
    • 0/-0.005

    Clear

  • L dimension tolerance (Reference tolerance)

    • +0.02/0
    • +0.02/0 or +0.05/0

    Clear

  • D/P (Shaft diameter)(mm)

    • 0.6
    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.2
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 12

     [3.5-6.99/0.01mm Unit(s)]

    Clear

  • Gas release shape

    • Single flat cutting
    • Four flats cutting

    Clear

  • No. (Nominal diameter)(mm)

    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 12

    Clear

  • L (L dimension)(mm)

     [40-350/0.01mm Unit(s)]

    Clear

  • E(mm)

     [0.02-0.05/0.01mm Unit(s)]

    Clear

  • Type

    • GW-EPH-L
    • GW-EPHB
    • GW-EPHBE
    • GW-EPHE-L
    • GW-EPHJ-L
    • GW-EPHJB
    • GW-EPHJBE
    • GW-EPHJE-L
    • GWS-EPH-L
    • GWS-EPHB
    • GWS-EPHBE
    • GWS-EPHE-L
    • GWS-EPHJ-L
    • GWS-EPHJB
    • GWS-EPHJBE
    • GWS-EPHJE-L

    Clear

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.