Flat ejector pins / head shape selectable / EN 1.3343 Equiv. / corners rounded / dimensions Configurable
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Head thickness | P (Tip) (mm) | W (Tip) (mm) | D (Shaft diameter) (mm) | R-Chamfered rectangular position | L (L dimension) (mm) | N (mm) | R (Corner R of the tip corner) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 4mm(JIS) | 0.6 ～ 1.3 | 0.3 ～ 1.3 | 1.5 | WR | 50 ～ 250 | 23 ～ 180 | 0.1 | ||
| 1 | Quote | 10 | 4mm(JIS) | 0.8 ～ 1.8 | 0.3 ～ 1.8 | 2 | WR | 50 ～ 300 | 23 ～ 230 | 0.1 | ||
| 1 | Quote | 10 | 4mm(JIS) | 0.8 ～ 2.3 | 0.3 ～ 2.3 | 2.5 | WR | 50 ～ 300 | 26 ～ 230 | 0.1 | ||
| 1 | Quote | 10 | 4mm(JIS) | 0.8 ～ 2.8 | 0.3 ～ 2.8 | 3 | WR | 50 ～ 350 | 27 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 4mm(JIS) | 1 ～ 3.3 | 0.3 ～ 3.3 | 3.5 | WR | 50 ～ 350 | 27 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 6mm(JIS) | 1 ～ 3.8 | 0.3 ～ 3.8 | 4 | WR | 50 ～ 350 | 29 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 6mm(JIS) | 1.2 ～ 4.3 | 0.3 ～ 4.3 | 4.5 | WR | 50 ～ 350 | 29 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 6mm(JIS) | 1.5 ～ 4.8 | 0.4 ～ 4.8 | 5 | WR | 50 ～ 350 | 31 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 6mm(JIS) | 1.8 ～ 5.3 | 0.5 ～ 5.3 | 5.5 | WR | 50 ～ 350 | 31 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 6mm(JIS) | 2 ～ 5.8 | 0.5 ～ 5.8 | 6 | WR | 50 ～ 350 | 33 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 6mm(JIS) | 2 ～ 6.3 | 0.5 ～ 6.3 | 6.5 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 6mm(JIS) | 2.3 ～ 6.8 | 0.5 ～ 6.8 | 7 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 8mm(JIS) | 2.3 ～ 7.8 | 0.5 ～ 7.8 | 8 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 8mm(JIS) | 2.3 ～ 8.3 | 0.5 ～ 8.07 | 8.5 | WR | 50 ～ 350 | 10 ～ 250 | 0.1 | ||
| 1 | Quote | 10 | 8mm(JIS) | 3 ～ 9.8 | 0.5 ～ 9.8 | 10 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 8mm(JIS) | 3 ～ 10.3 | 0.8 ～ 9.95 | 10.5 | WR | 50 ～ 350 | 10 ～ 250 | 0.1 | ||
| 1 | Quote | 10 | 8mm(JIS) | 3.5 ～ 11.8 | 0.8 ～ 11.8 | 12 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 8mm(JIS) | 3.5 ～ 14.8 | 1.5 ～ 14.8 | 15 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 0.6 ～ 1.3 | 0.3 ～ 1.3 | 1.5 | WR | 50 ～ 250 | 23 ～ 230 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 0.8 ～ 1.8 | 0.3 ～ 1.8 | 2 | WR | 50 ～ 300 | 23 ～ 230 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 0.8 ～ 2.3 | 0.3 ～ 2.3 | 2.5 | WR | 50 ～ 300 | 26 ～ 230 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 0.8 ～ 2.8 | 0.3 ～ 2.8 | 3 | WR | 50 ～ 350 | 27 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 1 ～ 3.3 | 0.3 ～ 3.3 | 3.5 | WR | 50 ～ 350 | 27 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 1 ～ 3.8 | 0.3 ～ 3.8 | 4 | WR | 50 ～ 350 | 29 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 1.2 ～ 4.3 | 0.3 ～ 4.3 | 4.5 | WR | 50 ～ 350 | 29 ～ 280 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 1.5 ～ 4.8 | 0.4 ～ 4.8 | 5 | WR | 50 ～ 350 | 31 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 1.8 ～ 5.3 | 0.5 ～ 5.3 | 5.5 | WR | 50 ～ 350 | 31 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 2 ～ 5.8 | 0.5 ～ 5.8 | 6 | WR | 50 ～ 350 | 33 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 2 ～ 6.3 | 0.5 ～ 6.3 | 6.5 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 2.3 ～ 6.8 | 0.5 ～ 6.8 | 7 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 2.3 ～ 7.8 | 0.5 ～ 7.8 | 8 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 2.3 ～ 8.3 | 0.5 ～ 8.07 | 8.5 | WR | 50 ～ 350 | 10 ～ 250 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 3 ～ 9.8 | 0.5 ～ 9.8 | 10 | WR | 50 ～ 350 | 40 ～ 330 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 3 ～ 10.3 | 0.5 ～ 9.95 | 10.5 | WR | 50 ～ 350 | 10 ～ 250 | 0.1 | ||
| 1 | Quote | 10 | 4mm(T4) | 3.5 ～ 11.8 | 0.8 ～ 11.8 | 12 | WR | 50 ～ 350 | 10 ～ 250 | 0.1 |
Loading...
Basic information
| Material | EN 1.3343 Equiv. | P/W dimension tolerance (Reference tolerance) | 0/-0.01 | Surface treatment | No |
|---|---|---|---|---|---|
| Rectangular treatment | R-Chamfered rectangular | Tip shape | No | Character engraving type | No |
| Number of engraving characters | No | C-Chamfered position | No | With/without gas release shape | No |
| Shape type | Normal | Trimming | Normal | Technical Standard | JIS |
Configure
Basic Attributes
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
- 4mm(JIS)
-
P (Tip)(mm)
-
W (Tip)(mm)
-
D (Shaft diameter)(mm)
-
L (L dimension)(mm)
-
N(mm)
-
R (Corner R of the tip corner)(mm)
-
Type
- ERFR
- ERJFR
- ERJWR
- ERWR
-
R-Chamfered rectangular position
- WR
- FR
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.