Core pins / cylindrical / with head / HSS, tool steel / D, L 0.01mm
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | D/P (Shaft diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 0.5 | 7 ～ 60 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 0.6 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 0.7 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 0.8 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 0.8 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 0.9 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 0.9 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.1 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.1 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.2 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.2 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.3 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.3 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.4 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.4 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.5 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.5 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.6 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.6 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.7 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.7 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.8 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.8 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.9 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 1.9 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 2 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 2 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 2.5 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 2.5 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 3 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 3 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 3.5 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 3.5 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 4 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 4 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 4.5 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 4.5 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 5 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 5 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 5.5 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 5.5 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 6 | 7 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 6 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 6.5 | 8 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 6.5 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 7 | 8 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 7 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 8 | 8 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 8 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 10 | 8 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 10 | - | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 13 | 8 ～ 100 | ||
| 1 | Quote | 10 | SKH51 | 0/-0.003 | +0.01/0 | 13 | - |
Loading...
Basic information
| Shape type | No tip shape | Quenching | Hardening steel | Head thickness | 4mm(T4) |
|---|---|---|---|---|---|
| Tip shape | No | Gas release shape | No | Character engraving type | No |
| Number of engraving characters | No | Technical Standard | JIS |
Configure
Basic Attributes
-
Material
- SKH51
- SKD61
-
L dimension tolerance
- +0.01/0
- +0.02/0
-
D/P (Shaft diameter)(mm)
-
L (L dimension)(mm)
-
Type
- CPD-L
- CPH-L
- CPM-L
- CPP-L
- CPV-L
- CPX-L
- CPZ-L
-
Shaft diameter tolerance
- 0/-0.003
- 0/-0.005
- -0.01/-0.02
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.