Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Shaft diameter tolerance | L dimension tolerance | Tip gradient tolerance | D/P (Shaft diameter) (mm) | Step (Step shape of the first step) | Shape (Tip shape) | RE (R shape alteration・enlargement) (mm) | A (Step shape diameter) (mm) | C (Step type taper width) (mm) | CVC (Designation of C dimension in increments of 0.01mm) (mm) | F (Bearing bore length) (mm) | G (Tip C chamfering width) (mm) | K (Tip angle) (°) | L (L dimension) (mm) | Q (Tip R chamfering) (mm) | R (Step type R) (mm) | S (Tip tapered width) (mm) | V (Tip diameter) (mm) | VC (V dimension alteration, smaller than V min) (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 20 | 1B | G | - | 4 ~ 19.99 | - | - | 28 ~ 119.5 | - | 21 ~ 60 | 30 ~ 120 | - | - | - | 5 ~ 19.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | 0/-0.1 | ±0.015 | 20 | 1B | G | - | 4 ~ 19.99 | - | - | 28 ~ 119.5 | - | 21 ~ 60 | 30 ~ 120 | - | - | - | - | 4 ~ 4.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1B | R | - | 0.4 ~ 0.99 | - | - | 10 ~ 99.5 | - | - | 12 ~ 100 | 0.2 ~ 0.4 | - | - | 0.5 ~ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1B | R | - | 0.4 ~ 0.99 | - | - | 10 ~ 99.5 | - | - | 12 ~ 100 | 0.2 ~ 0.4 | - | - | - | 0.4 ~ 0.49 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1B | R | - | 0.4 ~ 1.49 | - | - | 10 ~ 99.5 | - | - | 12 ~ 100 | 0.2 ~ 0.7 | - | - | 0.5 ~ 1.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1B | R | - | 0.4 ~ 1.49 | - | - | 10 ~ 99.5 | - | - | 12 ~ 100 | 0.2 ~ 0.7 | - | - | - | 0.4 ~ 0.49 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1B | R | - | 0.5 ~ 1.99 | - | - | 10 ~ 99.5 | - | - | 12 ~ 100 | 0.2 ~ 0.9 | - | - | 0.5 ~ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1B | R | - | 0.5 ~ 2.49 | - | - | 10 ~ 99.5 | - | - | 12 ~ 100 | 0.2 ~ 1.2 | - | - | 0.5 ~ 2.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1B | R | - | 0.7 ~ 2.99 | - | - | 10 ~ 99.5 | - | - | 12 ~ 100 | 0.2 ~ 1.4 | - | - | 0.7 ~ 2.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | - | 0.7 ~ 3.49 | - | - | 10 ~ 119.5 | - | - | 12 ~ 120 | 0.2 ~ 1.7 | - | - | 1 ~ 3.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | R | - | 0.7 ~ 3.49 | - | - | 10 ~ 119.5 | - | - | 12 ~ 120 | 0.2 ~ 1.7 | - | - | - | 0.7 ~ 0.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | - | 0.7 ~ 3.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 1.9 | - | - | 1 ~ 3.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | R | - | 0.7 ~ 3.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 1.9 | - | - | - | 0.7 ~ 0.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1B | R | - | 1 ~ 4.49 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 2.2 | - | - | 1 ~ 4.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1B | R | - | 1 ~ 4.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 2.4 | - | - | 1 ~ 4.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | - | 1 ~ 5.49 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 2.7 | - | - | 1.5 ~ 5.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | R | - | 1 ~ 5.49 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 2.7 | - | - | - | 1 ~ 1.49 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | - | 1.5 ~ 5.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 2.9 | - | - | 2 ~ 5.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | R | - | 1.5 ~ 5.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 2.9 | - | - | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6.5 | 1B | R | - | 1.5 ~ 6.49 | - | - | 10 ~ 119.5 | - | - | 12 ~ 120 | 0.2 ~ 3.2 | - | - | 2 ~ 6.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6.5 | 1B | R | - | 1.5 ~ 6.49 | - | - | 10 ~ 119.5 | - | - | 12 ~ 120 | 0.2 ~ 3.2 | - | - | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | - | 1.5 ~ 6.99 | - | - | 10 ~ 119.5 | - | - | 12 ~ 120 | 0.2 ~ 3.4 | - | - | 2 ~ 6.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | R | - | 1.5 ~ 6.99 | - | - | 10 ~ 119.5 | - | - | 12 ~ 120 | 0.2 ~ 3.4 | - | - | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | - | 1.5 ~ 7.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 3.9 | - | - | 2 ~ 7.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | R | - | 1.5 ~ 7.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 3.9 | - | - | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 10 | 1B | R | - | 1.5 ~ 9.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 4.9 | - | - | 2 ~ 9.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 10 | 1B | R | - | 1.5 ~ 9.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 4.9 | - | - | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 13 | 1B | R | - | 2 ~ 12.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 6.4 | - | - | 2 ~ 12.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 16 | 1B | R | - | 2 ~ 15.99 | - | - | 10 ~ 119.7 | - | - | 12 ~ 120 | 0.2 ~ 7.9 | - | - | 2 ~ 15.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 20 | 1B | R | - | 4 ~ 19.99 | - | - | 28 ~ 119.5 | - | - | 30 ~ 120 | 0.2 ~ 9.9 | - | - | 5 ~ 19.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 20 | 1B | R | - | 4 ~ 19.99 | - | - | 28 ~ 119.5 | - | - | 30 ~ 120 | 0.2 ~ 9.9 | - | - | - | 4 ~ 4.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1B | T | - | 0.4 ~ 0.99 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 15 | 0.5 ~ 0.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1 | 1B | T | - | 0.4 ~ 0.99 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 15 | - | 0.4 ~ 0.49 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1B | T | - | 0.4 ~ 1.49 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 20 | 0.5 ~ 1.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 1.5 | 1B | T | - | 0.4 ~ 1.49 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 20 | - | 0.4 ~ 0.49 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2 | 1B | T | - | 0.5 ~ 1.99 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 20 | 0.5 ~ 1.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 2.5 | 1B | T | - | 0.5 ~ 2.49 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 20 | 0.5 ~ 2.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3 | 1B | T | - | 0.7 ~ 2.99 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 100 | - | - | 0.1 ~ 20 | 0.7 ~ 2.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | T | - | 0.7 ~ 3.49 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 1 ~ 3.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 3.5 | 1B | T | - | 0.7 ~ 3.49 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | - | 0.7 ~ 0.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | T | - | 0.7 ~ 3.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 1 ~ 3.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4 | 1B | T | - | 0.7 ~ 3.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | - | 0.7 ~ 0.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 4.5 | 1B | T | - | 1 ~ 4.49 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 1 ~ 4.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5 | 1B | T | - | 1 ~ 4.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 1 ~ 4.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | T | - | 1 ~ 5.49 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 1.5 ~ 5.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 5.5 | 1B | T | - | 1 ~ 5.49 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | - | 1 ~ 1.49 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | T | - | 1.5 ~ 5.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 2 ~ 5.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6 | 1B | T | - | 1.5 ~ 5.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6.5 | 1B | T | - | 1.5 ~ 6.49 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 2 ~ 6.49 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 6.5 | 1B | T | - | 1.5 ~ 6.49 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | T | - | 1.5 ~ 6.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | 2 ~ 6.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 7 | 1B | T | - | 1.5 ~ 6.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 20 | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | T | - | 1.5 ~ 7.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 22.5 | 2 ~ 7.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 8 | 1B | T | - | 1.5 ~ 7.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 22.5 | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 10 | 1B | T | - | 1.5 ~ 9.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 28.1 | 2 ~ 9.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 10 | 1B | T | - | 1.5 ~ 9.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 28.1 | - | 1.5 ~ 1.99 | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 13 | 1B | T | - | 2 ~ 12.99 | - | - | 10 ~ 119.7 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 36.6 | 2 ~ 12.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 16 | 1B | T | - | 2 ~ 15.99 | - | - | 10 ~ 99.5 | - | 10 ~ 45 | 12 ~ 120 | - | - | 0.1 ~ 45.1 | 2 ~ 15.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 20 | 1B | T | - | 4 ~ 19.99 | - | - | 28 ~ 119.5 | - | 10 ~ 45 | 30 ~ 120 | - | - | 0.1 ~ 56.4 | 5 ~ 19.99 | - | ||
- | 1 | Quote | 10 | SKD61 | -0.01/-0.02 | +0.02/0 | ±0.015 | 20 | 1B | T | - | 4 ~ 19.99 | - | - | 28 ~ 119.5 | - | 10 ~ 45 | 30 ~ 120 | - | - | 0.1 ~ 56.4 | - | 4 ~ 4.99 |
Loading...
Shape type | One-step | Surface treatment | No | Head thickness | 4mm(T4) |
---|---|---|---|---|---|
Step (Step shape of the second step) | No second step |
Configure
Basic Attributes
Material
L dimension tolerance
Tip gradient tolerance
D/P (Shaft diameter)(mm)
Step (Step shape of the first step)
Shape (Tip shape)
RE (R shape alteration・enlargement)(mm)
A (Step shape diameter)(mm)
C (Step type taper width)(mm)
CVC (Designation of C dimension in increments of 0.01mm)(mm)
F (Bearing bore length)(mm)
G (Tip C chamfering width)(mm)
K (Tip angle)(°)
L (L dimension)(mm)
Q (Tip R chamfering)(mm)
R (Step type R)(mm)
S (Tip tapered width)(mm)
V (Tip diameter)(mm)
VC (V dimension alteration, smaller than V min)(mm)
Type
Shaft diameter tolerance
Filter by CAD data type
Optional Attributes