Ejector sleeves / head shape selectable / EN 1.3343 Equiv. / length configurable / inner diameter configurable / short version
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | V (Hole diameter) (mm) | Inner dia. tolerance | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 0/-0.005 | 2.5 | 1 ～ 1.3 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 3 | 1.31 ～ 1.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 4 | 1.91 ～ 2.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 5 | 2.91 ～ 3.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 6 | 3.91 ～ 4.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 7 | 4.91 ～ 5.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 8 | 5.81 ～ 6.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 2.5 | 1 ～ 1.3 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 3 | 1.31 ～ 1.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 4 | 1.91 ～ 2.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 5 | 2.91 ～ 3.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 6 | 3.91 ～ 4.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 7 | 4.91 ～ 5.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | -0.01/-0.02 | 8 | 5.81 ～ 6.8 | +0.01/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 2.5 | 1 ～ 1.3 | +0.005/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 3 | 1.31 ～ 1.8 | +0.005/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 4 | 1.91 ～ 2.8 | +0.005/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 5 | 2.91 ～ 3.8 | +0.005/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 6 | 3.91 ～ 4.8 | +0.005/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 7 | 4.91 ～ 5.8 | +0.005/0 | 15 ～ 50 | ||
| 1 | Quote | 10 | 0/-0.005 | 8 | 5.81 ～ 6.8 | +0.005/0 | 15 ～ 50 |
Loading...
Basic information
| Product composition | Single sleeve | Material | EN 1.3343 Equiv. | Surface treatment | No |
|---|---|---|---|---|---|
| Head thickness | 4mm(T4) | Concentricity between the hole and shaft diameters | ◎0.01 | Tapered or not | Yes |
| Center pin tip shape | No | Technical Standard | JIS |
Configure
Basic Attributes
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
[1-1.8/0.01mm Unit(s)][1.91-2.8/0.01mm Unit(s)][2.91-3.8/0.01mm Unit(s)][3.91-4.8/0.01mm Unit(s)][4.91-6.8/0.01mm Unit(s)]
-
Inner dia. tolerance
- +0.005/0
- +0.01/0
-
L (L dimension)(mm)
-
Type
- EPBB-H
- EPBB-M
- EPBBH
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.