Date Marked Pin Set (Outside Rings for Heat Resisting with removal tap) (HDTXS-R10-24)
Product Details:
Manufacturer part number: HDTXS-R10-24
Brand: MISUMI
Price: 75.27 €
Delivery time: 9 Days
Technical Data:
Year: 24 Year
Applicable date marked outer diameter: 10 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
HDTXS-R10-24
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
| D | D | B | L | E(Dismounting tap hole) | K | Arrow mark depth | Drafts for pulling |
| 4 | 4 | 2.6 | 8 | M1.8×0.35 | 2.4 | 0.12 | 20° |
| 5 | 5 | 2.9 | 8 | M2×0.4 | 2.4 | 0.14 | 20° |
| 6 | 6 | 3.95 | 8 | M2.5×0.45 | 2.4 | 0.18 | 23° |
| 8 | 8 | 5 | 10 | M3×0.5 | 2.8 | 0.18 | 25° |
| 10 | 10 | 6.3 | 12 | M3×0.5 | 3 | 0.2 | 25° |
| 12 | 12 | 7.5 | 14 | M4×0.7 | 4 | 0.2 | 25° |
| 16 | 16 | 11 | 14 | M5×0.8 | 3.7 | 0.22 | 25° |
| 20 | 20 | 13.2 | 16 | M5×0.8 | 3.7 | 0.22 | 25° |
Outside rings on this page are adapted for combination with inside arrows for Heat-resistant・Removal tap Type.
(This outside rings does not incompatible with inside arrows for PL exchange type.)
Material SUS420 
Hardness 50～53HRC
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HDTXS-R10-24 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Year (Year) | Applicable date marked outer diameter (mm) | |
|---|---|---|---|---|---|---|
75.27 € | 1 | 9 Days | 24 | 10 |
Loading...
Specification
| Part Number | － | Year | |
| (Year) | HDYYX6 | － | 18 |
| (No mark) | HDNX10 | ||
| (Year) | HDTX－R16 | － | 18 |
| (Month) | HDTDX－R16 | ||
Part Number | － | ①Characters for engraving | － | ②Characters for engraving | － | ③Characters for engraving | － | ④Characters for engraving | － | ⑤Characters for engraving | － | ⑥Characters for engraving | － | ⑫Characters for engraving |
HDTX－R 3M 6 | － | POM | － | PS | － | SAN | ||||||||
HDTX－R 6M16 | － | 10 | － | 20 | － | 30 | － | 40 | － | 50 | － | 60 | ||
HDTX－R12M16 | － | % | － | 1 | － | 2 | － | 3 | － | 4 | － | 5 | … － | F |
Specification
－Heat-resistant with removal tap type
■Year switching type
| Indication | outside rings divisions | Part Number | Year (Sales period) | ||
| Type | D | ||||
| 4 year type |  | 12 uniform divisions | HDTX－R | 4 | 18 (Sep.2017 ～ Mar.2019) 19 (Sep.2018 ～ Mar.2020) 20 (Sep.2019 ～ Mar.2021) |
| 5 | |||||
| 6 | |||||
| 8 | |||||
| 10 | |||||
| 12 | |||||
| 16 | |||||
| 20 | |||||
| 6 year type |  | 12 uniform divisions | HDTXS－R | 4 | 18 (Sep.2017 ～ Mar.2019) 19 (Sep.2018 ～ Mar.2020) 20 (Sep.2019 ～ Mar.2021) |
| 5 | |||||
| 6 | |||||
| 8 | |||||
| 10 | |||||
| 12 | |||||
| 16 | |||||
| 20 | |||||
■Month Day No marking Type
| Indication | Outside rings divisions | Part Number | ||
| Type | D | |||
| Month |  | 12 uniform divisions | HDTDX－R | 4 |
| 5 | ||||
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| 20 | ||||
| Day (1st digit) |  | 12 uniform divisions | HDTEX－R | 4 |
| 5 | ||||
 | 10 uniform divisions | 6 | ||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| 20 | ||||
| Day (2nd digit) |  | 12 uniform divisions | HDTFX－R | 4 |
| 5 | ||||
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| 20 | ||||
| Day |  | 31 uniform divisions | HDTGX－R | 16 |
| No-marking |  | 12 uniform divisions | HDTNX－R | 4 |
| 5 | ||||
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
－Heat-resistant・removal tap type / Character design type
■Outside ring character design type
| Indication | |||||||
| 1M (1place) | 2M (2places) | 3M (3places) | 4M (4places) | 5M (5places) | 6M (6places) | 10M (10places) | 12M (12places) |
engraving position | engraving position | engraving position | engraving position | engraving position Outside ring is divided equally among ten | engraving position | engraving position Outside ring is divided equally among ten | engraving position |
| Up to 3 characters can be designated at each engraving position. | Up to 2 characters can be designated at each engraving position. | Only 1 character can be designated at each engraving position. | |||||
| Part Number | Engraving characters (1~3 characters/Characters pronted in blue in indications) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | Indication | D | engraving position ①～⑫ | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HDTX－R | 1M 2M 3M | 4M 5M※ 6M※ | 10M※ 12M | 4 |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
●Dividing of outside rings
| 1M・2M・3M・4M 6M・12M | 12 uniform divisions |
| 5M・10M | 10 uniform divisions |
Use # for －(Minus), and % for 
(Space).
※Not applicable to D4 and D5 of 5M, 6M and 10M.
This page is Date Marked Pin Set (Outside Rings for Heat Resisting with removal tap), part number HDTXS-R10-24.
You can find the detail information about specifications and dimensions on part number HDTXS-R10-24.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| HDTX-R12-25 |
| HDTX-R16-24 |
| HDTX-R16-25 |
| HDTXS-R10-25 |
| HDTXS-R12-24 |
| HDTXS-R12-25 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Year (Year) | Applicable date marked outer diameter (mm) |
|---|---|---|---|---|---|---|
71.43 € | 1 | 9 Days | 25 | 12 | ||
87.25 € | 1 | 9 Days | 24 | 16 | ||
81.12 € | 1 | 9 Days | 25 | 16 | ||
69.97 € | 1 | 9 Days | 25 | 10 | ||
80.64 € | 1 | 9 Days | 24 | 12 | ||
75.00 € | 1 | 9 Days | 25 | 12 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.