STRAIGHT EJECTOR PINS / DIN 1530 / EN 1.2344 Equiv. / Nitrided / Standard (D-EPN3-400)
- Volume Discount
Product Details:
Manufacturer part number: D-EPN3-400
Brand: MISUMI
Price: 2.90 €
Delivery time: 17 Days
Technical Data:
Shaft diameter tolerance (Reference tolerance): -0.002/-0.008
Head thickness: 3mm
D/P (Shaft diameter): 3 mm
L (L dimension): 400 mm
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
D-EPN3-400
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-EPN
[ H ]Surface base: 900HV～
Material: 40～45HRC
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| D-EPN3-400 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shaft diameter tolerance (Reference tolerance) | Head thickness | D/P (Shaft diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|
2.90 € | 1 | Available | 17 Days | -0.002/-0.008 | 3mm | 3 | 400 |
Loading...
Specification table
■Standard| H | T | P g6 | Part No. | L Selection | |||||||||||
| Type | P | ||||||||||||||
| 2.5 | 1.2 | -0.002 -0.008 | D-EPN | 1 | 100 | 125 | 160 | 200 | |||||||
| 1.1 | 100 | 125 | 160 | 200 | |||||||||||
| 1.2 | 100 | 125 | 160 | 200 | |||||||||||
| 3 | 1.5 | 1.5 | 100 | 125 | 160 | 200 | 250 | ||||||||
| 1.8 | 100 | 125 | 160 | 200 | |||||||||||
| 4 | 2 | 2 | 100 | 125 | 160 | 200 | 250 | 315 | |||||||
| 5 | 2.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | |||||||
| 6 | 3 | 3 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||
| 7 | -0.004 -0.012 | 3.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | ||||||
| 8 | 4 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | |||||
| 4.5 | 100 | 125 | 160 | 200 | 250 | 315 | |||||||||
| 10 | 5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | |||
| 5.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||||
| 12 | 5 | 6 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | ||
| -0.005 -0.014 | 6.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | ||||||
| 7 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||||
| 7.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||||
| 14 | 8 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | |||
| 8.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||||
| 9 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | ||||||
| 9.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||||
| 16 | 10 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | |||
| -0.006 -0.017 | 10.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | ||||||
| 11 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||||
| 18 | 7 | 12 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | ||
| 12.2 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | |||||||
| 12.5 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | |||||||
| 22 | 14 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | |||||
| 16 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | ||||
| 24 | 18 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | ||||
| 26 | 8 | -0.007 | 20 | 100 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | |
| 32 | 10 | 25 | 125 | 160 | 200 | 250 | 315 | 400 | 500 | 630 | |||||
Order Example
| Part No. | - | L | ||
| D-EPN 3 | - | 100 | ||
Basic information
| Brand | MISUMI | Shape type | No tip processing | Material | EN 1.2344 Equiv. |
|---|---|---|---|---|---|
| L dimension tolerance (Reference tolerance) | +5/+0.1 | Surface treatment | Nitrided | Tip shape | No |
| Gas release shape | No | Character engraving type | No | Number of engraving characters | No |
| Technical Standard | DIN |
This page is STRAIGHT EJECTOR PINS / DIN 1530 / EN 1.2344 Equiv. / Nitrided / Standard, part number D-EPN3-400.
You can find the detail information about specifications and dimensions on part number D-EPN3-400.
Configure
Basic Attributes
-
Type
- D-EPN
-
Shaft diameter tolerance (Reference tolerance)
- -0.002/-0.008
- -0.004/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
-
Head thickness
- 1.2mm
- 1.5mm
- 2mm
- 3mm
- 5mm
- 7mm
- 8mm
- 10mm
-
D/P (Shaft diameter)(mm)
-
L (L dimension)(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 17 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| D-EPN1-200 |
| D-EPN1.1-100 |
| D-EPN1.1-125 |
| D-EPN3-500 |
| D-EPN3.5-100 |
| D-EPN3.5-125 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Shaft diameter tolerance (Reference tolerance) | Head thickness | D/P (Shaft diameter) (mm) | L (L dimension) (mm) |
|---|---|---|---|---|---|---|---|---|
2.58 € | 1 | Available | 17 Days | -0.002/-0.008 | 1.2mm | 1 | 200 | |
2.60 € | 1 | Available | 17 Days | -0.002/-0.008 | 1.2mm | 1.1 | 100 | |
2.85 € | 1 | Available | 17 Days | -0.002/-0.008 | 1.2mm | 1.1 | 125 | |
4.03 € | 1 | Available | 17 Days | -0.002/-0.008 | 3mm | 3 | 500 | |
1.70 € | 1 | Available | 17 Days | -0.004/-0.012 | 3mm | 3.5 | 100 | |
1.96 € | 1 | Available | 17 Days | -0.004/-0.012 | 3mm | 3.5 | 125 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.