STRAIGHT EJECTOR PINS / DIN 1530 / EN 1.2344 Equiv. / Nitrided / L, P Dimension Configurable
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-EPNB (L・P Specify)
[ H ]Surface base: 900HV～
Material: 40～45HRC
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| D-EPNB6-[40-1000/0.01]-P[5.51-6/0.01] |
| D-EPNB6.5-[100-250/0.01]-P[6.01-6.5/0.01] |
| D-EPNB8-[100-1000/0.01]-P[6.51-8/0.01] |
| D-EPNB10-[100-1000/0.01]-P[8.01-10/0.01] |
| Part Number | Minimum order quantity | Volume Discount | Brand | Shaft diameter tolerance (Reference tolerance) | Head thickness | D/P (Shaft diameter) (mm) | Tip shape | Gas release shape | Character engraving type | Number of engraving characters | No. (Nominal diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 13 Days | - | -0.004/-0.012 | 5mm | 5.51 ～ 6 | - | - | - | - | 6 | 40 ～ 1000 | ||
| 1 | 13 Days | - | -0.005/-0.014 | 5mm | 6.01 ～ 6.5 | - | - | - | - | 6.5 | 100 ～ 250 | ||
| 1 | 13 Days | - | -0.005/-0.014 | 5mm | 6.51 ～ 8 | - | - | - | - | 8 | 100 ～ 1000 | ||
| 1 | 13 Days | - | -0.005/-0.014 | 5mm | 8.01 ～ 10 | - | - | - | - | 10 | 100 ～ 1000 |
Loading...
Specification table
■L・P Dimension Specify| H | T | P g6 | Part No. | L 0.01mm increments | P 0.01mm increments | |
| Type | No. | |||||
| 2.5 | 1.2 | -0.002 -0.008 | D-EPNB | 1 | 40.00 ～ 200.00 | 0.50 ～ 1.00 |
| 3 | 1.5 | 1.5 | 1.01 ～ 1.50 | |||
| 4 | 2 | 2 | 40.00 ～ 315.00 | 1.51 ～ 2.00 | ||
| 5 | 2.5 | 2.01 ～ 2.50 | ||||
| 6 | 3 | 3 | 40.00 ～ 400.00 | 2.51 ～ 3.00 | ||
| 7 | -0.004 -0.012 | 3.5 | 3.01 ～ 3.50 | |||
| 8 | 4 | 40.00 ～ 500.00 | 3.51 ～ 4.00 | |||
| 4.5 | 40.00 ～ 250.00 | 4.01 ～ 4.50 | ||||
| 10 | 5 | 40.00 ～ 400.00 | 4.51 ～ 5.00 | |||
| 5.5 | 40.00 ～ 200.00 | 5.01 ～ 5.50 | ||||
| 12 | 5 | 6 | 40.00 ～ 1000.00 | 5.51 ～ 6.00 | ||
| -0.005 -0.014 | 6.5 | 100.00 ～ 250.00 | 6.01 ～ 6.50 | |||
| 14 | 8 | 100.00 ～ 1000.00 | 6.51 ～ 8.00 | |||
| 16 | 10 | 8.01 ～ 10.00 | ||||
| 18 | 7 | -0.006 -0.017 | 12 | 10.01 ～ 12.00 | ||
| 22 | 16 | 12.01 ～ 16.00 | ||||
| 26 | 8 | -0.007 -0.020 | 20 | 16.01 ～ 20.00 | ||
| 32 | 10 | 25 | 100.00 ～ 500.00 | 20.01 ～ 25.00 | ||
Order Example
| Part No. | - | L | - | P | ||
| D-EPNB 1 | - | 100.00 | - | P0.50 | ||
Alteration
| Part No. | － | L | － | P | － | (KC・WKC…etc.) | ||
| D-EPNB 4.5 | － | 248.35 | － | P4.23 | － | WKC2.115 | ||
Basic information
| Shape type | No tip processing | Material | EN 1.2344 Equiv. | L dimension tolerance (Reference tolerance) | +0.02/0 or +0.05/0 or +0.5/0 |
|---|---|---|---|---|---|
| Surface treatment | Nitrided | Technical Standard | DIN |
Configure
Basic Attributes
-
Type
- D-EPNB
-
Brand
- MISUMI
-
Shaft diameter tolerance (Reference tolerance)
- -0.002/-0.008
- -0.004/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
-
D/P (Shaft diameter)(mm)
-
Tip shape
- No
-
Gas release shape
- No
-
Character engraving type
- No
-
Number of engraving characters
- No
-
No. (Nominal diameter)(mm)
-
L (L dimension)(mm)
-
Head thickness
- 1.2mm
- 1.5mm
- 2mm
- 3mm
- 5mm
- 7mm
- 8mm
- 10mm
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.