STEPPED EJECTOR PINS / DIN 1530 / EN 1.2344 Equiv. / Nitrided / Dimension Configurable (Part Numbers - CAD Download)
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-ENSF
[ H ]Surface 900HV～Material 40～45HRC
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| D-ENSF12-[50-1000/0.01]-P[8.9-11.9/0.01]-N[17-990/1] |
| D-ENSF16-[50-1000/0.01]-P[11.9-15.9/0.01]-N[17-990/1] |
| Part Number | Minimum order quantity | Volume Discount | Head thickness | D (Shaft diameter) (mm) | P (Tip diameter) (mm) | L (L dimension) (mm) | N (mm) | |
|---|---|---|---|---|---|---|---|---|
| 1 | 18 Days | 7mm | 12 | 8.9 ～ 11.9 | 50 ～ 1000 | 17 ～ 990 | ||
| 1 | 22 Days | 7mm | 16 | 11.9 ～ 15.9 | 50 ～ 1000 | 17 ～ 990 |
Loading...
Specification table
| H | T | Part No. | L 0.01mm increments | P 0.01mm increments | N 1mm increments | |
| Type | No. | |||||
| 3 | 1.5 | D-ENSF | 1.5 | 40.00 ～ 200.00 | 0.80 ～ 1.40 | N≧15 and 15≧(L-N)≧150 |
| 4 | 2 | 2 | 40.00 ～ 315.00 | 0.80 ～ 1.90 | ||
| 5 | 2.5 | 0.80 ～ 2.40 | ||||
| 6 | 3 | 3 | 40.00 ～ 400.00 | 1.00 ～ 2.90 | ||
| 7 | 3.5 | 40.00 ～ 400.00 | 1.50 ～ 3.40 | N≧L/3 and (L-N)≧10 | ||
| 8 | 4 | 50.00 ～ 500.00 | 1.50 ～ 3.90 | |||
| 4.5 | 50.00 ～ 250.00 | 2.50 ～ 4.40 | ||||
| 10 | 5 | 50.00 ～ 400.00 | 3.00 ～ 4.90 | |||
| 5.5 | 50.00 ～ 200.00 | 3.50 ～ 5.40 | ||||
| 12 | 5 | 6 | 50.00 ～ 1000.00 | 4.00 ～ 5.90 | ||
| 6.5 | 50.00 ～ 250.00 | 4.50 ～ 6.40 | ||||
| 14 | 8 | 50.00 ～ 1000.00 | 5.90 ～ 7.90 | |||
| 16 | 10 | 7.90 ～ 9.90 | ||||
| 18 | 7 | 12 | 8.90 ～ 11.90 | |||
| 22 | 16 | 11.90 ～ 15.90 | ||||
| 26 | 8 | 20 | 15.90 ～ 19.90 | |||
| [ ! ]Nitriding may extend to the head as it is applied after dimension P machining. | ||||||
Order Example
| Part No. | － | L | － | P | － | N | ||
| D-ENSF 2.5 | － | 149.78 | － | P1.5 | － | N70 | ||
Alteration
| Part No. | － | L | － | P | － | N | － | (KC・WKC…etc.) | ||
| D-ENSF 2.5 | － | 149.78 | － | P1.5 | － | N70 | － | KC1.25 | ||
Basic information
| Brand | MISUMI | Material | EN 1.2344 Equiv. | Shaft diameter tolerance (Reference tolerance) | 0/-0.02 |
|---|---|---|---|---|---|
| Surface treatment | Nitrided | Tip shape | No | Character engraving type | No |
| Number of engraving characters | No | Gas release shape | No | Technical Standard | DIN |
| Type | D-ENSF |
Configure
Basic Attributes
-
Type
- D-ENSF
-
D (Shaft diameter)(mm)
-
P (Tip diameter)(mm)
-
L (L dimension)(mm)
-
N(mm)
-
Head thickness
- 1.5mm
- 2mm
- 3mm
- 5mm
- 7mm
- 8mm
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 15 Days or Less
- 17 Days or Less
- 18 Days or Less
- 22 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.