STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 & STRAIGHT CENTER PIN SETS -DIN 1530 / EN 1.2344 Equiv. / Nitrided
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-ESNP
| Part No. | [ M ] | [ H ] | |
| D-ESNP | ① | SKD61 equivalent＋Nitrided | Surface: 900HV Base Material: 40±3HRC |
| ② | SKD61 equivalent＋Nitrided | Surface: 900HV Base Material: 40±3HRC | |
[ ! ]To add fitting processing, not applicable to combination with other than sets.
| V (sleeve) | Tolerance |
| 2.0～ 3.0 | +0.010 0 |
| 3.1～ 6.0 | +0.012 0 |
| 6.1～10.0 | +0.015 0 |
| 10.1～16.0 | +0.018 0 |
x1 max.40
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | V (Hole diameter) (mm) | L (L dimension) (mm) | S (V Hole Diameter Length) (mm) | X (Full Length of the Center Pin) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 13 Days | 3mm | -0.04/-0.012 | 4 | 1.5 ～ 2.5 | 40 ～ 200 | 20 ～ 100 | 60 ～ 300 | ||
| 1 | 13 Days | 3mm | -0.04/-0.012 | 4.5 | 1.5 ～ 3 | 40 ～ 200 | 20 ～ 100 | 60 ～ 300 | ||
| 1 | 13 Days | 3mm | -0.04/-0.012 | 5 | 2 ～ 3.5 | 40 ～ 300 | 20 ～ 100 | 60 ～ 400 | ||
| 1 | 13 Days | 3mm | -0.04/-0.012 | 5.5 | 2 ～ 4 | 40 ～ 300 | 20 ～ 100 | 60 ～ 400 | ||
| 1 | 13 Days | 5mm | -0.005/-0.014 | 6 | 2 ～ 4.5 | 40 ～ 450 | 20 ～ 100 | 60 ～ 550 | ||
| 1 | 13 Days | 5mm | -0.005/-0.014 | 6.5 | 2 ～ 4.5 | 40 ～ 450 | 20 ～ 100 | 60 ～ 550 | ||
| 1 | 13 Days | 5mm | -0.005/-0.014 | 7 | 2 ～ 5 | 40 ～ 450 | 20 ～ 100 | 60 ～ 550 | ||
| 1 | 13 Days | 5mm | -0.005/-0.014 | 7.5 | 2 ～ 5.5 | 40 ～ 450 | 20 ～ 100 | 60 ～ 550 | ||
| 1 | 13 Days | 5mm | -0.005/-0.014 | 8 | 2 ～ 6 | 70 ～ 500 | 20 ～ 100 | 90 ～ 600 | ||
| 1 | 13 Days | 5mm | -0.005/-0.014 | 9 | 2.5 ～ 7 | 70 ～ 500 | 20 ～ 100 | 90 ～ 600 | ||
| 1 | 13 Days | 5mm | -0.006/-0.017 | 10 | 2.5 ～ 8 | 70 ～ 500 | 20 ～ 100 | 90 ～ 600 | ||
| 1 | 13 Days | 7mm | -0.006/-0.017 | 12 | 2.5 ～ 10 | 70 ～ 500 | 20 ～ 100 | 90 ～ 900 | ||
| 1 | 13 Days | 7mm | -0.006/-0.017 | 12 | 2.5 ～ 10 | 500.1 ～ 800 | 20 ～ 100 | 90 ～ 900 | ||
| 1 | 13 Days | 7mm | -0.006/-0.017 | 15 | 2.5 ～ 12 | 70 ～ 500 | 20 ～ 100 | 90 ～ 900 | ||
| 1 | 13 Days | 7mm | -0.006/-0.017 | 15 | 2.5 ～ 12 | 500.1 ～ 800 | 20 ～ 100 | 90 ～ 900 | ||
| 1 | 13 Days | 7mm | -0.006/-0.017 | 16 | 3 ～ 13 | 70 ～ 500 | 20 ～ 100 | 90 ～ 900 | ||
| 1 | 13 Days | 7mm | -0.006/-0.017 | 16 | 3 ～ 13 | 500.1 ～ 800 | 20 ～ 100 | 90 ～ 900 | ||
| 1 | 13 Days | 8mm | -0.007/-0.020 | 20 | 3 ～ 16 | 100 ～ 500 | 20 ～ 100 | 120 ～ 900 | ||
| 1 | 13 Days | 8mm | -0.007/-0.020 | 20 | 3 ～ 16 | 500.1 ～ 800 | 20 ～ 100 | 120 ～ 900 |
Loading...
Specification table
| H | T | Part No. | L | V 0.1mm increments | S 1mm increments | X 0.1mm increments | |||||
| Type | D | 0.01mm increments | 0.1mm increments | ||||||||
| 8 | 3 | D-ESNP (1.2344 equivalent ＋ Nitrided) | 4 | 40.00～200.00 | - | 1.5～ 2.5 | 20～100 ([ ! ]D4, D4.5 When V1.5～V1.9 20～40) | X≧L＋20 and X≦L＋100 | |||
| 4.5 | 1.5～ 3.0 | ||||||||||
| 10 | 5 | 40.00～300.00 | 2.0～ 3.5 | ||||||||
| 5.5 | 2.0～ 4.0 | ||||||||||
| 12 | 5 | 6 | 40.00～450.00 | 2.0～ 4.5 | L | (L－S) min. | |||||
| 6.5 | 2.0～ 4.5 | 40.00～60.00 | 20 | ||||||||
| 7 | 2.0～ 5.0 | 60.01～ | 30 | ||||||||
| 7.5 | 2.0～ 5.5 | ||||||||||
| 14 | 8 | 70.00～500.00 | 2.0～ 6.0 | 20～100 (L－S)≧50 | |||||||
| 9 | 2.5～ 7.0 | ||||||||||
| 16 | 10 | 2.5～ 8.0 | |||||||||
| 18 | 7 | 12 | 500.1 ～ 800.0 | 2.5～10.0 | |||||||
| 22 | 15 | 2.5～12.0 | |||||||||
| 16 | 3.0～13.0 | ||||||||||
| 26 | 8 | 20 | 100.00～500.00 | 3.0～16.0 | |||||||
| Head diameter/thickness of center pin | ||
| H2 | T2 | V (Center pin) |
| 3 | 1.5 | 1.5 |
| 4 | 2 | 1.6～ 2.0 |
| 5 | 2.1～ 2.5 | |
| 6 | 3 | 2.6～ 3.0 |
| 7 | 3.1～ 3.5 | |
| 8 | 3.6～ 4.5 | |
| 10 | 4.6～ 5.5 | |
| 12 | 5 | 5.6～ 6.5 |
| 14 | 6.6～ 8.0 | |
| 16 | 8.1～10.0 | |
| 18 | 7 | 10.1～12.0 |
| 22 | 12.1～16.0 | |
Order Example
| Part No. | - | L | - | V | - | S | - | X | ||
| D-ESNP10 | - | 250.00 | - | 6.5 | - | S80 | - | X360 | ||
Alteration
| Part No. | － | L | － | V | － | S | － | X | － | (KC・WKC···etc.) | ||
| D-ESNP10 | － | 150.3 | － | 2.5 | － | S60 | － | X215 | － | HC14 | ||
Basic information
| Brand | MISUMI | Product composition | Center pin sets | Material | EN 1.2344 Equiv. |
|---|---|---|---|---|---|
| Surface treatment | Nitrided | Concentricity between the hole and shaft diameters | ◎0.08 | Inner dia. tolerance | H7 |
| Tapered or not | No | Center pin tip shape | No | Technical Standard | DIN |
Configure
Basic Attributes
-
Type
- D-ESNP
-
Head thickness
- 3mm
- 5mm
- 7mm
- 8mm
-
Shaft diameter tolerance
- -0.04/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
L (L dimension)(mm)
-
S (V Hole Diameter Length)(mm)
-
X (Full Length of the Center Pin)(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.