• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

STEP EJECTOR SLEEVES -DIN ISO 8405 / 1.2344 equivalent+Nitrided / ◎0.08 / Dimensions configurable-

STEP EJECTOR SLEEVES -DIN ISO 8405 / 1.2344 equivalent+Nitrided / ◎0.08 / Dimensions configurable-

MISUMI

MISUMI

  • DIN Standard
  • New Product

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Product specification

D-ESNF
[ ! ]Nitriding may extend to the head as it is applied after dimension V, D and P machining.
[ ! ]When the diameter (D) portion of the stepped center pin is inserted into the relief hole (C) of D-ESNF, D-ESDF type, make surerelief hole (C) ≧ pin diameter (D)＋1.0
 
Part No.[ M ][ H ][ T ]P[ T ]VApplicable center pin shaft diameter tolerance
D-ESNF1.2344 equivalent+NitridedSurface: 900HV
Base Material: 40±3HRC		g6H7-0.01
-0.02		*Please note that the ejector sleeve with a
V dimension tolerance of H7 has a long
precision fitting portion S and is not
suitable for use with a center pin with a
shaft diameter tolerance of 0-0.005.
 
[ T ]Pg6
P≦66.5≦P≦1012≦P≦16P＝20
－0.004
－0.012		－0.005
－0.014		－0.006
－0.017		－0.007
－0.020
 
[ T ]VH7
V≦3.03.1≦V≦6.06.1≦V≦10.0V≧10.1
+0.010
0		+0.012
0		+0.015
0		+0.018
0

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
D-ESNF5-[50-300/0.01]-V[2-3/0.1]-P[3.5-4.95/0.01]-C[2.5-3.5/0.1]-N[16-300/1]-S[20-100/5]
D-ESNF5.5-[50-300/0.01]-V[2-3.5/0.1]-P[3.5-5.45/0.01]-C[2.5-4/0.1]-N[16-300/1]-S[20-100/5]
D-ESNF6-[50-500/0.01]-V[2-4/0.1]-P[4-5.95/0.01]-C[2.5-4.5/0.1]-N[16-500/1]-S[20-100/5]
D-ESNF6.5-[50-500/0.01]-V[2-4.5/0.1]-P[4-6.45/0.01]-C[2.5-5/0.1]-N[16-500/1]-S[20-100/5]
D-ESNF7-[50-500/0.01]-V[2-4.5/0.1]-P[4-6.95/0.01]-C[2.5-5/0.1]-N[16-500/1]-S[20-100/5]
D-ESNF7.5-[50-500/0.01]-V[2-5/0.1]-P[4-7.45/0.01]-C[2.5-5.5/0.1]-N[16-500/1]-S[20-100/5]
D-ESNF8-[70-500/0.01]-V[2.5-5.5/0.1]-P[5-7.95/0.01]-C[3-6/0.5]-N[26-500/1]-S[20-100/5]
D-ESNF9-[70-500/0.01]-V[3-6.5/0.1]-P[6-8.95/0.01]-C[3.5-7/0.1]-N[24-490/1]-S[20-100/5]
D-ESNF10-[70-500/0.01]-V[3.5-7.5/0.1]-P[6-9.95/0.01]-C[4-8/0.1]-N[26-500/1]-S[20-100/5]
D-ESNF12-[70-500/0.01]-V[4-8.5/0.1]-P[7.5-11.95/0.01]-C[4.5-9/0.1]-N[30-600/1]-S[20-100/5]
D-ESNF12-[500.1-800/0.1]-V[4-8.5/0.1]-P[7.5-11.95/0.01]-C[4.5-9/0.1]-N[30-600/1]-S[20-100/5]
D-ESNF15-[70-500/0.01]-V[5-10.5/0.1]-P[10-14.95/0.01]-C[5.5-11/0.5]-N[33-600/1]-S[20-100/5]
D-ESNF15-[500.1-800/0.1]-V[5-10.5/0.1]-P[10-14.95/0.01]-C[5.5-11/0.5]-N[33-600/1]-S[20-100/5]
D-ESNF16-[100-500/0.01]-V[5-11.5/0.1]-P[12-15.95/0.01]-C[5.5-12/0.5]-N[34-590/1]-S[20-100/5]
D-ESNF16-[500.1-800/0.1]-V[5-11.5/0.1]-P[12-15.95/0.01]-C[5.5-12/0.5]-N[34-590/1]-S[20-100/5]
D-ESNF20-[100-500/0.01]-V[7-16/0.1]-P[14.5-19.95/0.01]-C[7.5-17/0.5]-N[34-590/1]-S[20-100/5]
D-ESNF20-[500.1-800/0.1]-V[7-16/0.1]-P[14.5-19.95/0.01]-C[7.5-17/0.5]-N[34-590/1]-S[20-100/5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
D (Shaft diameter)
(mm) 		P (Tip diameter)
(mm) 		V (Hole diameter)
(mm) 		N
(mm) 		L (L Dimension)
(mm) 		C(Recess Diameter)
(mm) 		S(V Hole Diameter Length)
(mm)
1 15 Days 53.5 ～ 4.952 ～ 316 ～ 30050 ～ 3002.5 ～ 3.520 ～ 100
1 15 Days 5.53.5 ～ 5.452 ～ 3.516 ～ 30050 ～ 3002.5 ～ 420 ～ 100
1 15 Days 64 ～ 5.952 ～ 416 ～ 50050 ～ 5002.5 ～ 4.520 ～ 100
1 15 Days 6.54 ～ 6.452 ～ 4.516 ～ 50050 ～ 5002.5 ～ 520 ～ 100
1 15 Days 74 ～ 6.952 ～ 4.516 ～ 50050 ～ 5002.5 ～ 520 ～ 100
1 15 Days 7.54 ～ 7.452 ～ 516 ～ 50050 ～ 5002.5 ～ 5.520 ～ 100
1 15 Days 85 ～ 7.952.5 ～ 5.526 ～ 50070 ～ 5003 ～ 620 ～ 100
1 15 Days 96 ～ 8.953 ～ 6.524 ～ 49070 ～ 5003.5 ～ 720 ～ 100
1 15 Days 106 ～ 9.953.5 ～ 7.526 ～ 50070 ～ 5004 ～ 820 ～ 100
1 18 Days 127.5 ～ 11.954 ～ 8.530 ～ 60070 ～ 5004.5 ～ 920 ～ 100
1 18 Days 127.5 ～ 11.954 ～ 8.530 ～ 600500.1 ～ 8004.5 ～ 920 ～ 100
1 18 Days 1510 ～ 14.955 ～ 10.533 ～ 60070 ～ 5005.5 ～ 1120 ～ 100
1 18 Days 1510 ～ 14.955 ～ 10.533 ～ 600500.1 ～ 8005.5 ～ 1120 ～ 100
1 18 Days 1612 ～ 15.955 ～ 11.534 ～ 590100 ～ 5005.5 ～ 1220 ～ 100
1 18 Days 1612 ～ 15.955 ～ 11.534 ～ 590500.1 ～ 8005.5 ～ 1220 ～ 100
1 18 Days 2014.5 ～ 19.957 ～ 1634 ～ 590100 ～ 5007.5 ～ 1720 ～ 100
1 18 Days 2014.5 ～ 19.957 ～ 1634 ～ 590500.1 ～ 8007.5 ～ 1720 ～ 100

Loading...

  1. 1

Specification table

HTPart No.LV
0.1mm increments		[ ! ]P
0.01mm increments		C
0.1mm increments		Cmax.N
1mm increments		S
5mm increments
Type 0.01mm increments0.1mm increments
103D-ESNF
(1.2344 equivalent)
＋
Nitrided		550.00~300.00-2.0~3.03.50~4.95C≧V+0.5
and
C≦P-1.0
([ ! ]When L＞300
0.5mm
increments)		3.5N≧L3    
5.52.0~3.53.50~5.454.0 20～100 
125650.00~500.002.0~4.04.00~5.954.5 L(L-S) min. 
6.52.0~4.54.00~6.455.0 50.00~60.0020 
74.00~6.955.0 60.01~30 
7.52.0~5.04.00~7.455.5    
14870.00~500.002.5~5.55.00~7.956.020～100
(L-S)≧50
93.0~6.56.00~8.957.0( When L＞600
16103.5~7.56.00~9.95C≧V+0.5
and
C≦P-1.5
([ ! ]When L＞300
0.5mm increments)		8.0L3≦N≦23L )
1871270.00~500.00500.1～800.04.0~8.57.50~11.959.0
22155.0~10.510.00~14.9511.0        
16100.00~500.005.0~11.512.00~15.9512.0        
268207.0~16.014.50~19.9517.0        
[ ! ]Lower limit of P and V 
 LD5・5.56~77.5・89~20  
 L≦300P≧V+1.5P≧V+1.5P≧V+1.5P≧V+2  
 L>300 and (L-N-10)≦S-P≧V+3P≧V+4P≧V+4.5  
 L>300 and (L-N-10)>S-P≧(V+3) and (P-C)/2≧0.75P≧(V+4) and (P-C)/2≧0.75P≧(V+4.5) and (P-C)/2≧0.75  
                      

Order Example

               
 Part No.-L-V-P-C-N-S 
 D-ESNF 12-200.05-V4.5 P7.55-C6.0-N120-S85 
               

Alteration

                 
 Part No.-L-V-P-C-N-S-(KC・WKC…etc.) 
 D-ESNF 6-150.00-V3.0 P5.50-C4.0-N80-S85-KC3.5 
                 

Basic information

Brand MISUMI Product composition Single sleeve Surface treatment Nitrided
Concentricity ◎0.08 Tapered or not No Technical Standard DIN

Configure

Clear all

17Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Type

    • D-ESNF

    Clear

  • D (Shaft diameter)(mm)

    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 7.5
    • 8
    • 9
    • 10
    • 12
    • 15
    • 16
    • 20

    Clear

  • P (Tip diameter)(mm)

     [3.5-19.95/0.01mm Unit(s)]

    Clear

  • V (Hole diameter)(mm)

     [2-16/0.1mm Unit(s)]

    Clear

  • N(mm)

     [16-600/1mm Unit(s)]

    Clear

  • L (L Dimension)(mm)

     [500.1-800/0.1mm Unit(s)][50-500/0.01mm Unit(s)]

    Clear

  • C(Recess Diameter)(mm)

     [2.5-9/0.1mm Unit(s)][3-17/0.5mm Unit(s)]

    Clear

  • S(V Hole Diameter Length)(mm)

     [20-100/5mm Unit(s)]

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 15 Days or Less
    • 18 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.