• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type (Part Numbers - CAD Download)

Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type

Click on this image to zoom in.

Click on this image to zoom in.

  • Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type
  • Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type

MISUMI

MISUMI

[Features] Tapered test pin that can pre-set a diamond shape. -You can choose between 2 shapes.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

 
Material1HardnessRound TipD-Shape Tip
TypeType
S   0
-0.02		Sg6S   0
-0.02/F   0
-0.05		Sg6/F   0
-0.03
EN 1.1191 Equiv.-KJPDTKMKJPGDTKMKJPDTKKJPGDTK
EN 1.1191 Equiv.45HRC~KJPDTKMHKJPGDTKMHKJPDTHKKJPGDTHK
EN 1.4301 Equiv.-KJPDTKMSKJPGDTKMSKJPDTKSKJPGDTKS
2 EN 1.4037 Equiv.45~50HRCKJPDTKMCKJPGDTKMCKJPDTKCKJPGDTKC

Specifications

Part Number (TYPE, D)-P-S-F-B
KJPDTK12L-P16.00-S8.00-F2.2-B10
Sg6
3.00-0.002
-0.008
3.01~ 6.00-0.004
-0.012
6.01~10.00-0.005
-0.014
10.01~18.00-0.006
-0.017
18.01~29.00-0.007
-0.020
Part Number0.01mm Increment0.1mm Increment1mm Increment(W)M
Round TipD-Shape TipDPS(P-1≥S)F(F<S/2)
D-Shape Tip only		B
S   0
-0.02		Sg6S   0
-0.02/F   0
-0.05		Sg6/F   0
-0.03
(EN 1.1191 Equiv.)
KJPDTKM

(EN 1.1191 Equiv. Hardened)
KJPDTKMH

(EN 1.4301 Equiv.)
KJPDTKMS

(EN 1.4037 Equiv.)
KJPDTKMC		(EN 1.1191 Equiv.)
KJPGDTKM

(EN 1.1191 Equiv. Hardened)
KJPGDTKMH

(EN 1.4301 Equiv.)
KJPGDTKMS

(EN 1.4037 Equiv.)
KJPGDTKMC		(EN 1.1191 Equiv.)
KJPDTK

(EN 1.1191 Equiv. Hardened)
KJPDTHK

(EN 1.4301 Equiv.)
KJPDTKS

(EN 1.4037 Equiv.)
KJPDTKC		(EN 1.1191 Equiv.)
KJPGDTK
(EN 1.1191 Equiv. Hardened)

KJPGDTHK

(EN 1.4301 Equiv.)
KJPGDTKS

(EN 1.4037 Equiv.)
KJPGDTKC		 84.00~ 6.003.00~ 5.000.3~ 2.05~25

For EN 1.4301 Equiv.,
B≤Sx5		2M4
104.00~ 8.003.00~ 7.000.3~ 3.0M5
126.00~10.003.00~ 9.000.3~ 4.03
168.00~14.003.00~13.000.5~ 6.04
2012.00~18.005.00~17.001.0~ 8.06
2516.00~23.008.00~22.002.0~10.08
10L10.00~16.005.00~15.001.0~ 7.04
12L12.00~20.006.00~19.002.0~ 9.06
16L16.00~25.008.00~24.002.0~11.08
20L20.00~30.0010.00~29.002.0~14.0
Large Head Type (D=10L ~ 20L) is available for EN 1.1191 Equiv. only. Please select S dimension so that S section is smaller than the diamond section.

Alterations

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJPDTHK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTHK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTHK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPDTHK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPDTHK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPDTHK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTHK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPDTHK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTHK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPDTHK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPDTK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPDTK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPDTK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPDTK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPDTK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTKC8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTKC10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTKC12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPDTKC16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTKC20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTKC25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTKS8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTKS10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTKS12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPDTKS16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTKS20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTKS25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPGDTHK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPGDTHK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPGDTHK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPGDTHK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPGDTHK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPGDTHK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPGDTHK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPGDTHK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPGDTHK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPGDTHK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPGDTK8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPGDTK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPGDTK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPGDTK12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPGDTK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPGDTK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPGDTK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPGDTK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPGDTK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPGDTK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPGDTKC8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPGDTKC10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPGDTKC12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPGDTKC16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPGDTKC20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPGDTKC25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPGDTKS8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPGDTKS10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTip Shape Material Hardness Large Head/Small Head Insertion Part S Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		F
(mm) 		P
(mm) 		S
(mm)

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.0285 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02105 ～ 251 ～ 710 ～ 165 ～ 15

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02125 ～ 252 ～ 912 ～ 206 ～ 19

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02165 ～ 252 ～ 1116 ～ 258 ～ 24

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02205 ～ 252 ～ 1420 ～ 3010 ～ 29

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0285 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02105 ～ 251 ～ 710 ～ 165 ～ 15

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02125 ～ 252 ～ 912 ～ 206 ～ 19

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02165 ～ 252 ～ 1116 ～ 258 ～ 24

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02205 ～ 252 ～ 1420 ～ 3010 ～ 29

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.0285 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.0285 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg685 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6105 ～ 251 ～ 710 ～ 165 ～ 15

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6125 ～ 252 ～ 912 ～ 206 ～ 19

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6165 ～ 252 ～ 1116 ～ 258 ～ 24

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6205 ～ 252 ～ 1420 ～ 3010 ～ 29

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0285 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0210L5 ～ 251 ～ 710 ～ 165 ～ 15

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0212L5 ～ 252 ～ 912 ～ 206 ～ 19

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0216L5 ～ 252 ～ 1116 ～ 258 ～ 24

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0220L5 ～ 252 ～ 1420 ～ 3010 ～ 29

-

1 10 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg685 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg685 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 10 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6105 ～ 250.3 ～ 34 ～ 83 ～ 7

Loading...

  1. 1
  2. 2
  3. Next >>

Price List

DRound Tip Unit PriceD-Shape Tip Unit Price
S   0
-0.02		Sg6S   0
-0.02/F   0
-0.05		Sg6/F   0
-0.03
KJPDTKMKJPDTKMHKJPDTKMSKJPDTKMCKJPGDTKMKJPGDTKMHKJPGDTKMSKJPGDTKMCKJPDTKKJPDTHKKJPDTKSKJPDTKCKJPGDTKKJPGDTHKKJPGDTKSKJPGDTKC
Small Head8                
10                
12                
16                
20                
25                
Large Head10L  --  --  --  --
12L  --  --  --  --
16L  --  --  --  --
20L  --  --  --  --
 

Basic information

Type Slot Pin Shape Tapered Tip Type Straight
Shape of Stepped Section Diamond

Configure

Clear all

64Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 10L
    • 12
    • 12L
    • 16
    • 16L
    • 20
    • 20L
    • 25

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • F(mm)

     [0.3-14/0.1mm Unit(s)]

    Clear

  • P(mm)

     [4-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [3-29/0.01mm Unit(s)]

    Clear

  • Type

    • KJPDTHK
    • KJPDTK
    • KJPDTKC
    • KJPDTKM
    • KJPDTKMC
    • KJPDTKMH
    • KJPDTKMS
    • KJPDTKS
    • KJPGDTHK
    • KJPGDTK
    • KJPGDTKC
    • KJPGDTKM
    • KJPGDTKMC
    • KJPGDTKMH
    • KJPGDTKMS
    • KJPGDTKS

    Clear

  • Tip Shape

    • Circular Shape
    • D Cut

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 10 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.