• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Manifold Hydraulic / Outlets 3 Sides / No Inlets (Part Numbers - CAD Download)

Manifold Hydraulic / Outlets 3 Sides / No Inlets

MISUMI

MISUMI

Hydraulic manifold blocks. G (PF) thread machining can also be specified.
  • Order quantities extended (D-JIT)

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

TypeMaterialSurface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
25 × 32 Sq.40 Sq.50 Sq.60 Sq.70 Sq.40 Sq.50 Sq.60 Sq.
BMASBMAFABMAFLBMAFLKBMALBMAFPABMAFLPBMAFLKPSteel for General StructureTrivalent Chromate20.6 MPa ≈ 210 kgf/cm2 or less
—BMAFMABMAFLM—BMALM—BMAFLMP—Electroless Nickel Plating
BMASRBMAFRABMAFLR—————SUS304—
—BMAFSA——————SUS316
—BMAFCA——————Brass1 MPa ≈ 10 kgf/cm2 or less

Specification Table

Part Number—Q—R—S—P  
     
Type Mounting Hole Change Number of Circuits
BMAF
BMAFLP
G−BMAFLP
NA
NA		 4
3
3		—
—
—		Q3
Q3
Q3		—
—
—		R2
R4
R4		—
—
—		S3
S4
S4
—
—
P45
P45		 

(G Thread)
Part NumberRc (PT), NPT SelectionPitch PNumber of Pitches
N		Total Number of
Q, R and S Threads		ABEFXYMounting Hole
TypeMounting Hole ChangeNumber of CircuitsQ, R, SStandardConfigurable 1mm IncrementM
(25x32 Sq.)NA (Through)


T (Tapped)


ZT (Counterbore Tapped)


YZ (Side Counterbore)


YN (Side Through)		11 (1/8)--03253220167.57M5
Pitch Standard
BMAS
BMASR		 22516
329
4312
5415
6518
7621
8724
(40 Sq.)1 --03404025207.57M6
Pitch Standard
BMAFA
BMAFMA
BMAFRA
BMAFSA
BMAFCA		Pitch Configurable
BMAFPA


 		21 (1/8)4025~5016
32 (1/4)29
43 (3/8)312
51N (NPT1/8)415
62N (NPT1/4)30~50518
73N (NPT3/8)621
(Standard Change: E dimension)8 724
(50 Sq.)1 --03505030257.58M8
Pitch Standard
BMAFL
BMAFLM
BMAFLR		Pitch Configurable
BMAFLP
BMAFLMP		22 (1/4)6035~6016
33 (3/8)29
44 (1/2)312
56 (3/4)415
6 40~60518
(60 Sq.)1 --03606030307.58M8
Pitch Standard
BMAFLK		Pitch Configurable
BMAFLKP		22 (1/4)6035~6016
33 (3/8)29
44 (1/2)312
56 (3/4)415
6 40~60518
(70 Sq.)1 --03707040351010M8
Pitch Standard
BMAL
BMALM		 26 (3/4)6016
38 (1)29
4 312
By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering.(Ex.: G-BMAF)For ordering, see the Ordering Example.
For Q, R and S, specify 1, 2, 3, 4, 6, 8, 1N, 2N or 3N indicated before ( ).
Single Circuit is not available for Pitch Configurable Type.
SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.
For Block Square 50 Type, when 3/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square 60 Type instead.
Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types .

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. << Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next >>
Part Number
BMAFLMYN1-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYN2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYN3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYN4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYN5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYN6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYZ1-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYZ2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYZ3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYZ4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYZ5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMYZ6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMZT1-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMZT2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMZT3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMZT4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMZT5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLMZT6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLNA1-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLNA2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLNA3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLNA4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLNA5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLNA6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLP2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLP3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLP4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLP5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLP6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[40-60/1]
BMAFLPNA2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPNA3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPNA4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPNA5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPNA6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[40-60/1]
BMAFLPT2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPT3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPT4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPT5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPT6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[40-60/1]
BMAFLPYN2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYN3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYN4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYN5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYN6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[40-60/1]
BMAFLPYZ2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYZ3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYZ4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYZ5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPYZ6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[40-60/1]
BMAFLPZT2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPZT3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPZT4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPZT5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[35-60/1]
BMAFLPZT6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]-P[40-60/1]
BMAFLT1-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLT2-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLT3-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLT4-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLT5-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
BMAFLT6-Q[2,​3,​4,​6]-R[2,​3,​4,​6]-S[2,​3,​4,​6]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShape Material Surface Treatment Block Size
(mm) 		Number of Circuits
(Circuits) 		Thread Size / Type Mounting Hole Change Pitch P
(mm) 		Pitch Standard / Configurable Application Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1) Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1) Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 501Standard Thread {PT, m (Coarse) Thread}YN (Side Through)-Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 502Standard Thread {PT, m (Coarse) Thread}YN (Side Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 503Standard Thread {PT, m (Coarse) Thread}YN (Side Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 504Standard Thread {PT, m (Coarse) Thread}YN (Side Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 505Standard Thread {PT, m (Coarse) Thread}YN (Side Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 506Standard Thread {PT, m (Coarse) Thread}YN (Side Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 501Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)-Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 502Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 503Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 504Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 505Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 506Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 501Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)-Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 502Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 503Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 504Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 505Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 12 Days 10T-Shaped HoleSteel for General StructureElectroless Nickel Plating50 x 506Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 501Standard Thread {PT, m (Coarse) Thread}NA (Through)-Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}NA (Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}NA (Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}NA (Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}NA (Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}NA (Through)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}NA (Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}NA (Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}NA (Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}NA (Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}NA (Through)40 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}T (Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}T (Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}T (Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}T (Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}T (Tapped)40 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}YN (Side Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}YN (Side Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}YN (Side Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}YN (Side Through)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}YN (Side Through)40 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}YZ (Side Counterbore)40 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)35 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}ZT (Counterbore Tapped)40 ～ 60Configurable TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 501Standard Thread {PT, m (Coarse) Thread}T (Tapped)-Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 502Standard Thread {PT, m (Coarse) Thread}T (Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 503Standard Thread {PT, m (Coarse) Thread}T (Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 504Standard Thread {PT, m (Coarse) Thread}T (Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 505Standard Thread {PT, m (Coarse) Thread}T (Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

-

1 9 Days 10T-Shaped HoleSteel for General StructureTrivalent Chromate50 x 506Standard Thread {PT, m (Coarse) Thread}T (Tapped)60Fixed TypeFor hydraulic / Water Pressure2 ～ 62 ～ 62 ～ 6

Loading...

  1. << Previous
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next >>
 

Configure

Clear all

624Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shape

    • Intlets - None Outlets - Top & Side
    • T-Shaped Hole

    Clear

  • Surface Treatment

    • Not Provided
    • Trivalent Chromate
    • Electroless Nickel Plating

    Clear

  • Block Size(mm)

    • 25 x 32
    • 40 x 40
    • 50 x 50
    • 60 x 60
    • 70 x 70

    Clear

  • Number of Circuits(Circuits)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8

    Clear

  • Thread Size / Type

    • G (PF) Thread
    • Standard Thread {PT, m (Coarse) Thread}

    Clear

  • Mounting Hole Change

    • NA (Through)
    • Not Specified (Counterbore)
    • T (Tapped)
    • YN (Side Through)
    • YZ (Side Counterbore)
    • ZT (Counterbore Tapped)

    Clear

  • Pitch P(mm)

    • 25
    • 40
    • 60

     [35-60/1mm Unit(s)]

    Clear

  • Pitch Standard / Configurable

    • Configurable Type
    • Fixed Type

    Clear

  • Application

    • For Water Hydraulic
    • For hydraulic / Water Pressure

    Clear

  • Select a value for PT/PF Thread Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 6
    • 8

    Clear

  • Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 6
    • 8

    Clear

  • Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 6
    • 8

    Clear

  • Type

    • BMAFL
    • BMAFLK
    • BMAFLKP
    • BMAFLM
    • BMAFLMP
    • BMAFLP
    • BMAFLR
    • BMAL
    • BMALM
    • BMAS
    • BMASR
    • G-BMAFL
    • G-BMAFLK
    • G-BMAFLKP
    • G-BMAFLM
    • G-BMAFLMP
    • G-BMAFLP
    • G-BMAFLR
    • G-BMAFM
    • G-BMAFR
    • G-BMAL
    • G-BMALM
    • G-BMAS
    • G-BMASR

    Clear

  • Material

    • EN 1.4301 Equiv.
    • Steel for General Structure

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 6 Days or Less
    • 7 Days or Less
    • 9 Days or Less
    • 10 Days or Less
    • 12 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.