Manifold Pneumatic / Outlets 1 Side / 2 Inlets (Part Numbers - CAD Download)
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Type | Material | Surface Treatment | Max. Operating Pressure | ||||||
| Pitch (P) Standard | Pitch (P) Configurable | ||||||||
| 15 Sq. | 25 Sq. | 30x40 Sq. | 50 Sq. | 25 Sq. | 30x40 Sq. | 50 Sq. | |||
| - | BMRAC | BMRAF | BMRAL | BMRACP | BMRAFP | BMRALP | Aluminum Alloy 5000 series | - | 1MPa≈10kgf/cm2 or less |
| BMRASA | BMRACA | BMRAFA | BMRALA | BMRACAP | BMRAFAP | BMRALAP | Clear Anodize | ||
Specifications
| Part Number | - | R | - | G | - | K | - | P | ||||||
| Type | Mounting Hole Change | Number of Circuits | ||||||||||||
| BMRAC BMRAFP G-BMRAFP | T ZT ZT | 2 3 3 | - - - | R5 R1 R1 | - - - | G1 G2 G2 | - - - | K1 K2 K2 | - - | P40 P40 | (G Thread) | |||
| Part Number | Rc (PT), NPT, M (Coarse) Selection | Pitch P | Number of Pitches N | Total Number of R, G and K Threads | A | B | E | F | X | Y | Mounting Hole | ||||
| Type | Mounting Hole Change | Number of Circuits | R, G, K | Standard | Configurable 1mm Increment | M | |||||||||
| (15 Sq.) | T (Tapped) | 1 | M3 (M3) M4 (M4) 5 (M5) | 15 | - | 0 | 3 | 15 | 15 | 15 | 10 | 5 | 3.5 | M4 | |
| Pitch Standard BMRASA | 2 | 1 | 4 | ||||||||||||
| 3 | 2 | 5 | |||||||||||||
| 4 | 3 | 6 | |||||||||||||
| 5 | 4 | 7 | |||||||||||||
| 6 | 5 | 8 | |||||||||||||
| 7 | 6 | 9 | |||||||||||||
| 8 | 7 | 10 | |||||||||||||
| (25 Sq.) | 1 | 1 (1/8) M3 (M3)* M4 (M4)* 5 (M5)* | 15 | 15~50 | 0 | 3 | 25 | 25 | 20 | 12.5 | 10 | 4 | M5 | ||
Pitch Standard BMRAC BMRACA | Pitch Configurable BMRACP BMRACAP | 2 | 1 | 4 | |||||||||||
| 3 | 2 | 5 | |||||||||||||
| 4 | 3 | 6 | |||||||||||||
| 5 | 4 | 7 | |||||||||||||
| 6 | 5 | 8 | |||||||||||||
| 7* | 15~40 | 6 | 9 | ||||||||||||
| 8* | 15~35 | 7 | 10 | ||||||||||||
| (30x40 Sq.) | NA (Through) T (Tapped) ZT (Counterbore Tapped) | 1 | 1 (1/8) 2 (1/4) 5 (M5)* 1N (NPT1/8) 2N (NPT1/4) | 30 | 20~50 | 0 | 3 | 30 | 40 | 20 | 20 | 7.5 | 7 | M5 | |
Pitch Standard BMRAF BMRAFA | Pitch Configurable BMRAFP BMRAFAP | 2 | 1 | 4 | |||||||||||
| 3 | 2 | 5 | |||||||||||||
| 4 | 3 | 6 | |||||||||||||
| 5 | 4 | 7 | |||||||||||||
| 6 | 5 | 8 | |||||||||||||
| 7* | 15~40 | 6 | 9 | ||||||||||||
| 8* | 15~35 | 7 | 10 | ||||||||||||
| (50 Sq.) | 1 | 2 (1/4) 3 (3/8) 40 (1/2) | 40 | 35~60 | 0 | 3 | 50 | 50 | 25 | 25 | 8.5 | 8.5 | M8 | ||
Pitch Standard BMRAL BMRALA | Pitch Configurable BMRALP BMRALAP | 2 | 1 | 4 | |||||||||||
| 3 | 2 | 5 | |||||||||||||
| 4 | 3 | 6 | |||||||||||||
| 5 | 4 | 7 | |||||||||||||
| 6 | 5 | 8 | |||||||||||||
For R, G and K, specify 1, 2, 3, 4, 5, M3, M4, 1N, or 2N indicated before ( ). Number of CircuitsEach 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except for 15 Sq.)Number of Circuits
When * marked 7 or 8 Circuit is selected from 25 Sq. / 30x40 Sq., M3, M4 · and 5(M5) are not available for G or K.(M5) M3, M4 and 5(M5) are not available for 25 Sq., 30x40 Sq. Pitch Configurable Type G and K.
Single Circuit is not available for Pitch Configurable Type.Number of Circuits
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Surface Treatment | Block Size (mm) | Number of Circuits (Circuits) | Thread Size / Type | Mounting Hole Change | Pitch P (mm) | Pitch Standard / Configurable | Drawing G Part Thread Dia. NPT Selection [G] | Drawing K Part Thread Dia. NPT Selection [K] | Drawing R Part Thread Dia. NPT Selection [R] | Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4) | Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 10 Days | 10 | Not Provided | 50 x 50 | 5 | G (PF) Thread | ZT (Counterbore Tapped) | 40 | Fixed Type | - | - | - | - | - | - | 2 ～ 4 | 2 ～ 4 | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | Not Provided | 50 x 50 | 6 | G (PF) Thread | ZT (Counterbore Tapped) | 40 | Fixed Type | - | - | - | - | - | - | 2 ～ 4 | 2 ～ 4 | 2 ～ 4 | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 1 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 2 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 3 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 4 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 5 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 6 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 7 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 8 | G (PF) Thread | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 1 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 2 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 3 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 4 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 5 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 6 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 7 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Clear Anodized Aluminum | 15 x 15 | 8 | G (PF) Thread | T (Tapped) | 15 | Fixed Type | - | - | - | - | - | - | - | - | - |
Loading...
Basic information
| Shape | Lateral Through Hole, Vertical Semi-Through Hole | Material | EN AW-5052 Equiv. | Application | Pneumatic |
|---|
Configure
Basic Attributes
-
Surface Treatment
- Not Provided
- Clear Anodized Aluminum
-
Block Size(mm)
- 15 x 15
- 25 x 25
- 30 x 40
- 50 x 50
-
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Thread Size / Type
-
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- Not Specified (Through)
- T (Tapped)
- ZT (Counterbore Tapped)
-
Pitch P(mm)
-
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
-
Drawing G Part Thread Dia. NPT Selection [G]
- 1/4 [G2N]
- 1/8 [G1N]
-
Drawing K Part Thread Dia. NPT Selection [K]
- 1/4 [K2N]
- 1/8 [K1N]
-
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
-
Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Type
- BMRAC
- BMRACA
- BMRACAP
- BMRACP
- BMRAF
- BMRAFA
- BMRAFAP
- BMRAFP
- BMRAL
- BMRALA
- BMRALAP
- BMRALP
- BMRASA
- G-BMRAC
- G-BMRACA
- G-BMRACAP
- G-BMRACP
- G-BMRAF
- G-BMRAFA
- G-BMRAFAP
- G-BMRAFP
- G-BMRAL
- G-BMRALA
- G-BMRALAP
- G-BMRALP
- G-BMRASA
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Flow Rate Control Valves / 90 Deg. Elbow / Miniature
MISUMI Standard Price : 7.67 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.